• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.189-197
• /
• 2022

This study was conducted to compare the egg productivity, egg quality, and blood characteristics of laying hens with different laying rates, and the frequency and cumulative duration of the sitting behavior observed before laying was investigated. Twelve 45-week-old Hy-Line Brown laying hens were randomly assigned to two treatment groups with three replicates. Treatment groups were classified as layers laying over 80%(high egg performance layers; HEP) and layers laying below 50%(poor egg performance layers; PEP). The experiment lasted 4 weeks. HEP showed higher hen-house egg production ratio and egg mass and lower feed conversion ratio(FCR) (P<0.05) compared with PEP, although egg weight was higher in PEP (P<0.05). In terms of egg quality, PEP showed differences in eggshell quality (eggshell color, eggshell thickness, and eggshell weight) (P<0.05). Additionally, HEP showed high triglycerides(TG), and PEP showed high alanine transaminase(ALT) level (P<0.05) in serum collected in the morning. In the afternoon, the HEP showed higher lactate dehydrogenase(LDH) levels (P<0.05). No differences in the Ca: P ratio were observed between layers with different laying rates. One hour before egg laying, HEP exhibited sitting behavior 4 times on average, each lasting 25 minutes. In conclusion, egg production and quality differ between HEP and PEP, and HEP showed frequent sitting behavior before egg laying. However, additional research is necessary to explore approaches other than specific behavioral observation to distinguish poor layers in the flock for application in farms.

• Korean Journal of Poultry Science
• /
• v.49 no.3
• /
• pp.139-144
• /
• 2022

This study was conducted to investigate the effect of three different photoperiods on growth performance, blood properties, and stress indicators in broiler chicks between 1-7 days after hatching. Two hundred and fifty-two 1-day-old male broiler chicks (57.0±0.12 g) were divided into three treatments, with 4 replicates per treatment and 22 birds per replicate subjected to three different photoperiods of 24L, 22L/2D and 18L/6D. A light-emitting diode bulb served as the light source, with an illuminance of 30 lx. As an experimental diet, a commercial feed based on a corn-soybean meal, with 22% CP and 3,150 kcal/kg ME diet, and water were fed ad libitum. Body weight gain, feed conversion ratio, and liver weight ratio showed a statistically significant difference between the 18L/6D and 24L treatments (P<0.05), but with no significant difference between the 22L/2D treatment and either the 24L or 18L/6D treatment. The breast meat ratio was 5.59% in the 18L/6D treatment group, which was lower than that of other treatment groups (P<0.05). The triglyceride levels were highest (P<0.05) in the 18L/6D treatment among treatments, but alanine aminotransferase levels were significantly higher (P<0.05) in the 22L/2D treatment than in the 24L treatment. Levels of cytokines, i.e., Interleukin-6 and Tumor Necrosis Factor-α did not show a significant difference among the treatments, but corticosterone content was significantly higher (P<0.05) in the 24L treatment than in the 18L/6D treatment. In conclusion, 22 hours of lighting is appropriate between 1~7 days after hatching, considering growth performance and the overall health of broiler chicks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.20-26
• /
• 2023

Fiber content in the storage roots of sweetpotato varies between different varieties. For examples, the high fiber content of certain types has a poor texture when steamed or roasted. This study was conducted to evaluate the optimal sieve mesh size for separating fibers, the chemical composition of fibers and differences in fiber content among different varieties. We found that the separated fiber content (dry weight) of mashed and steamed sweetpotato was higher after washing three times (143.3 mg/100 g) compared with that washed five times (128.4 mg/100 g). The Hogammi variety remained 85.9% of total fiber content at 10 mesh (2,000 ㎛) and 9.6% of total fiber content at 30 mesh (600 ㎛), and Jinyulmi remained 74.9 and 16.7% of total fiber content , respectively. Therefore, a 30 mesh sieve was considered the most suitable for fiber separation. Among the 10 studied cultivars, Jinhongmi showed the lowest amount of fiber (24.8 mg/100 g) and Hogammi had the highest amount (111.4 mg/100 g), which was 4.5 times larger than that of Jinhongmi. Cellulose, hemicellulose and lignin content of separated fibers showed no difference between the viscous-type Hogammi and powdery-type Jinyulmi varieties, with averages of 32.5, 22.3 and 29.6%, respectively. Correlation results using the Image J program showed a significant correlation between the distribution of the stained area and the fiber content (R = 0.74, p < 0.05). Staining distribution differed among varieties, suggesting that a simple fiber content test could be performed using the staining method on raw sweetpotato. These results provide useful information to help inform farmers on the fiber content of different sweetpotato varieties.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.325-336
• /
• 2023

This study used leaves and stems of 'Tongchaeru', one of the sweet potato varieties, to investigate broiler productivity, meat quality, blood properties, growth hormones, and immune factor levels according to drying method and amount added to feed. For this experiment, a total of 720 1-day-old male Ross 308 broilers were used. Treatments were assigned with 3 replicates per treatment and 20 birds were assigned to each replicate. The treatment group was designed into 12 treatments according to the type of natural product (leaves (L), stems (S)), drying type (natural (N), hot air (H), freeze (F)) and amount added (0.1%, 0.3%). The test was conducted for a total of 5 weeks. In this study, there was no significant difference in productivity depending on the type and amount of additives added (P>0.05). The FS 0.3% group showed high pH and WHC levels, and the shear force was lowest at HL 0.1% group (P<0.05). Blood cell and serum biochemical components were similar in all treatments, and growth hormone IGF-1 was highest in FS 0.1% group (P<0.05). There was no significant difference in IFN-γ, but the highest level of IL-6 was seen in the HS 0.1% group (P<0.05). In conclusion, the meat quality and the level of growth hormone and immune factors in the body were different depending on the type and amount of dried leaves and stems of sweet potato 'Tongchaeru', further study is needed to compare the selected additives and amounts added with those without additions.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.61-71
• /
• 1989

The purposes of this study were to investigate the genetic variations by backcrossing in commercial chickens. Backcrossing was carried out successively back to parent stock (P.S). Heritabilities and genetic correlation coefficients were estimated to verify the genetic variations. The data obtained from a breeding programme with commercial chickens (I strain) were collected from 1955 to 1987 at Poultry Breeding Farm, Seoul National University. Data came from a total of 1230 female offspring. The results obtained are summarized as follows： 1. The general performance ($Mean\pmStandard deviation$) of each trait was $663.94\pm87.11$g for 8 weeks body weight, $1579.1\pm155.43$g for 20 weeks body weight, $2124.1\pm215.3$g for 40 weeks body weight, $2269.1\pm242.94$g for 60 weeks body weight, $168.43\pm12.94$ day for a9e at sexual maturity (SM), $214.52\pm29.82$ eggs , for total egg number to 60 weeks of age (TEN), $61.45\pm3.48$ g for average weight (AEW), $13180.7\pm1823.22$ g for total egg mass to 60 weeks of age(TEM). All traits, except 10 weeks body weight and AEW, were significant for the degrees of backcross (p＜0.01). 2. The pooled estimates of heritabilities derived from the sire, dam and combined variance components were 0.47~0.52 for age at sexual maturity (SM), 0.07~0.37 for total egg number (TEN), 0.40~0.54 for average egg weight (AEW), 0.18~0.27 for total egg mass (TEM). High heritability estimates were found for SM and AEW. TEN and TEM were estimated to be a lowly heritable traits. Heritability estimates from dam components were higher than those from sire components. These differences might be due to non-additive genetic effect and maternal effect. 3. The estimates of heritabilities and standard errors derived from combined variance components for different degrees of backcross were $0.47\pm0.11$ (BCO), $0.42\pm0.16$ (BC1), $0.51\pm0.29$ (BC2) for TEN, $0.59\pm0.20$ (BCO), $0.43\pm0.17$ (BC1), $0.35\pm0.18$ (BC2) for AEW, $0.28\pm0.12$(BC0), $0.20\pm0.11$(BC1), $0.18\pm0.14$ (BC2) for TEM. Heritability estimates for AEW and TEM were decreased by backcrossing while those for SM and TEN remained constant. Since backcrossing contributes to increased homozygosity, the genetic variation of the traits (AEW and TEM) decreased . 4. The pooled estimates of genetic correlation coefficients were -0.55 between SM and TEN, 0.20 between SM and AEW, -0.29 between TEN and AEW, 0.82 between TEM and TEN, 0.31 between TEM and AEW, -0.42 between TEM and SM. The genetic correlation between TEM and TEN was higher than that between TEM and AEW, and it was suggested that egg mass was strongly affected by egg number. Also, age at sexual maturity(SM) contributes to egg mass(TEM). 5. When backcrossing was carried out successively, the genetic correlation between TEM and TEN increased (BC0：0.79, BC1：0.82, BC2：0.91) but those between TEM and SM decreased (BC0：-0.54, BC1：-0.36, BC2：-0.09) with successive backcrosses.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.367-375
• /
• 2011

For this study, Korean-type Koumiss was made by the fermentation of mixed cultures, in which yeast, Kuyveromyces, and microflora, Streptococcus thermophiles and Lactobacillus bulgaricus, were inoculated into 10% skimmed milk with added whey powder(control: A, 2%: B, 4%: C, 6%: D, and 8%: E). Fat, protein, lactose, titratable acidity, pH, the number of lactic acid bacteria, the number of yeast, alcohol content, volatile fatty acids, volatile free amino acids and minerals were measured in the products. The results were as follows: As the dosage of whey powder increased, fat increased from 0.74% in the control to 2.30% in sample E, protein increased from 2.95% in the control to 4.39% in sample E and lactose increased from 3.10% in the control to 7.43% in sample E. Titratable acidity and pH increased gradually. The number of lactic acid bacteria increased from $10^9\;cfu/m{\ell}$ in the control to $3.8{\times}10^9\;cfu/m{\ell}$ in sample E, and the number of yeast increased from $6.1{\times}10^7\;cfu/m{\ell}$ in the control to $1.65{\times}10^8\;cfu/m{\ell}$ in sample E, according to the increase of whey powder content. For alcohol content, the average values were 0.863%, 0.967%, 0.890%, 1.290%, and 1.313% for the control and samples B, C, D, and E, respectively. As the dosage of whey powder increased, alcohol content showed a tendency to gradually increase. The average alcohol content of E was 1.313 and this was higher than the alcohol content of Kazahstana-type Koumiss with 1.08%. Sixteen types of free amino acids were detected. Glycine was the lowest in the control at $0.38mg/m{\ell}$ and sample E contained $0.64mg/m{\ell}$. Histidine was also low in the control at $0.42mg/m{\ell}$ and sample E contained $0.65mg/m{\ell}$. On the other hand, glutamic acid was highest at $4.13mg/m{\ell}$ in the control whereas sample E had $6.96mg/m{\ell}$. Proline was also high in the control at $1.71mg/m{\ell}$ in control, but E contained $2.80mg/m{\ell}$. Aspartic acid and leucine were greater in sample E than in the control. For volatile free fatty acids, content generally had a tendency to increase in the control, and samples B, C, D, and E. Content of acetic acid gradually increased from $12,661{\mu}g/100m{\ell}$ in the control to $37,140{\mu}g/m{\ell}$ in sample E. Butyric acid was not detected in the control and was measured as $1,950{\mu}g/100m{\ell}$ in sample E. Caproic acid content was $177{\mu}g/100m{\ell}$ in the control and $812{\mu}g/100m{\ell}$ in sample E, and it increased according to the increase of whey powder content. Valeric acid was measured in a small amount in the control as $22{\mu}g/100m{\ell}$, but it was not detected in any other case. Mineral contents of Ca, P, and Mg increased from 1,042.38 ppm, 863.61 ppm, and 101.28 ppm in the control to 1,535.12 ppm, 1,336.71 ppm, and 162.44 ppm in sample E, respectively. Na content was increased from 447.19 ppm in the control to 1,001.57 ppm in sample E. The content of K was increased from 1,266.39 ppm in the control to 2,613.93 ppm in E. Mineral content also increased with whey powder content. In sensory evaluations, the scores increased as whey powder content increased. Flavor was lowest in the control with 6.3 points and highest in E with 8.2 points. Body and texture were highest at 4.2 points in the control, which did not have added whey powder. In the case of appearance, there were no great differences among the samples.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.96-102
• /
• 2008

This study was carried out to examine agronomic characteristics and seed qualities of 827 Korean soybean landraces according to the collecting areas. Agronomic characteristics and seed qualities was examined according to the localities by weather characteristics. Days to flowering was the longest (mean 70.9 days) in the northwest seashore, and the most short in the south inland (mean 63.8 days). Growth days was the longest in the Gyeongbuk inland (mean 136.0 days), and the most short in the mountain-high (mean 132.8 days). The stem height was the most short in the north-west seashore (mean 81.3 cm), and in the south seashore (mean 58.8 cm). The seed weight of 100 seeds was the lightest in the north-west seashore (mean 17.1 g), and the heaviest in the south-west seashore (mean 21.5 g). The crude protein contents was the lowest in the north-west seashore (mean 40.1%), the highest in the south seashore (mean 42.8%), and vice versa in the crude oil. The contents of sucrose and oligo-saccharide was the highest 5.8% and 8.6%, respectively, in the mountain-high, and the lowest 4.8% and 7.6% in the Gyeongbuk inland and south seashore, respectively. Among the iso-flavone contests, the contents of genistein and total was the highest, $635.6\;{\mu}g/g$ and $1258.1\;{\mu}g/g$, respectively, in the mountain inland, and the lowest $319.2\;{\mu}g/g$ and $835.3\;{\mu}g/g$ in the south-west seashore. The contents of glycitein was the highest $124.3\;{\mu}g/g$ in the south seashore.

• Korean Journal of Agricultural Science
• /
• v.29 no.2
• /
• pp.20-34
• /
• 2002

This study was conducted to examine the effects of an Aspergillus oryzae fermentation culture on the in vitro digestibilities of dry matter, crude fiber, acid detergent fiber (ADF), neutral detergent fiber (NDF), crude protein, and pH in in vitro experiment of diets for dairy cows. A fungal species, Aspergillus oryzae was supplied by Korea Research Institute of Bioscience and Biotechnology, Daejeon, Korea (KCTC 1229). The experimental diets were commercial compound feed (concentrate) and total mixed ration (TMR) for lactating cows, of which chemical analyses were determined at Research and Development Institute, Woosung Feed Co., Ltd., while the digestibilities were done at the laboratory of Chungnam National University. Aspergillus oryzae culture products were added to compound feed and TMR at the rate of 0, 1.0, 2.0, 3.0% respectively. The experimental diet with the rumen fluid sampled from Holstein fresian milking cows were used and digested for 24 hrs, 48hrs and 72hrs in the shaking incubator. The residues of the digesta were digested for 48hrs in the incubator in which put 30ml of 0.1N HCl with 0.2% pepsin at $39^{\circ}C$. The final precipitates were dried for 48hrs in the drier at $60^{\circ}C$. These experimental procedures were triplicated to determine the in vitro digestibility of dry matter, crude fiber, ADF, NDF, crude protein and pH. Compared to control diet, not added Aspergillus oryzae, the DM digestibility of fungal diets were improved 2.1%(63.1%), 9.7%(68.5%) and 9.0%(68.0%) for 24 hour fermentation in compound feed while 4.8%(60.0%), 6.4%(61.1%) and 2.9%(58.8%) in TMR. On the contrary, for 48 hour and 72 hour digestibilities, the effects of Aspergillus oryzae culture on the digestibility of dry matter were relatively lowered compared to 24 hour digestibility. Referring to the digestibility of dietary fiber, Aspergillus oryzae was believed to significantly improve digestibilities of crude fiber, ADF and NDF. Those were increased up to 13.3%(53.3%) for 24 hour fermentation, while 2.4%(54.6%) for 3.0% added for 72 hour fermentation in compound feed. However, there were no significant differences among the treatments for the inclusion rate of Aspergillus oryzae, even though the more inclusion rate, the better digestibility. The protein digestibilities were significantly improved from 0.4%(79.7%) to 9.4%(71.8%) by adding Aspergillus oryzae into compound feed. However, there were no significant differences between the two experimental diets, 2.0% and 3.0% Aspergillus oryzae included diets. In case of TMR, the protein digestibilities were significantly improved from 4.0%(70.4%) to 6.3%(65.1%) by adding Aspergillus oryzae. However, there were no significant differences between the two experimental diets, 2.0% and 3.0% Aspergillus oryzae included diets. In this study, there were no significant differences among the treatments in pH. On the contrary, there were slightly decrease in pH by adding Aspergillus oryzae into experimental diets but not significant. Summarizing the results of this examination, Aspergillus oryzae fermentation culture is believed to improve the digestibilities of dry matter, fiber and crude protein in cattle diets. However, more detailed research for the mechanism of the fungal culture is required to improve ruminal environment.