• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1664-1666
• /
• 2011

오늘날 고성능의 소형 센서 및 무선통신 기술의 발달로 유비쿼터스 컴퓨팅의 실현이 가능하게 되었다. 미래의 스마트한 디바이스뿐만 아니라 무선통신이 가능한 USN(Ubiquito us Sensor network) 기술은 주변 현황을 인식하고 필요한 정보를 처리하여 현장건설 등에 피이드백 시킴으로써 보다 나은 건설 진행과정에 관한 파악과 설계변경 및 계획 등에 필요한 정보를 제공할 수 있다. 본 연구는 TinyOS 기반에서 운용되는 무선 통신에 의한 USN 기술과 그래픽 기반의 LabView 프로그래밍 기술을 융합하여 정보를 처리할 수 있는 일련의 인터페이스 방법을 구현하였다. 송수신된 데이터 처리 결과는 TinyOS 기반으로 동작하는 PC에 그래프 등으로 나타나도록 하였으며, 무선통신용 USN 기술과 융합된 그래픽 처리 기반의 마이크로프로세서 시스템의 장점과 편리성으로 건설현장의 진행과정파악 및 변경 등에 필요한 정보를 제공하며 건설현장 정보의 피이드백을 가능하도록 하였다. 그 결과, 철도건설 현장관리에서의 USN과 구조물의 정밀진단 및 관리에 매우 유용함을 입증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.545-548
• /
• 2008

건강과 미용에 대한 관심은 IT 기술의 발전과 결합하여 유-헬스케어 산업의 부흥을 이끌고 있다. 특히, 향상된 디지털 영상 장비를 통한 각종 신체 정보 분석이 가능해짐에 따라 피부 자가 진단 시스템 등에 대한 연구 및 제품 출시가 활발히 이루어지고 있다. 본 논문에서는 이진 영상의 각 축에 대한 밀도 분석을 통해 특징점을 검출하는 방법을 소개하고 이를 토대로 자외선 광으로 촬영한 피부 현미경 영상에서 피지 부위를 자동 검출하는 기법을 제안하며 실험을 통하여 성능을 분석한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.1-3
• /
• 2003

최근 생물정보 기술이 암 진단의 새로운 방법으로 관심을 모으고 있다. 다양한 기계학습 기법을 적용하여 우수한 결과를 얻고 있지만, 의학 분양에서는 정확률이 높은 분류기의 획득과 동시에 획득된 분류규칙을 분석하고 이해할 수 있어야 한다. 생물정보 기술에서 많이 사용되는 유전발현 데이터는 데이터내에 수천 내지 수만의 변수가 존재하여 직접 이들 사이의 복잡한 관계를 표현하고 이해하는 것은 매우 어렵다. 본 논문에서는 이러한 어려움을 극복하기 위해 유전발현 데이터에서 분류에 유용한 특징들을 추출하고 유전자 프로그래밍으로 추출된 특징들을 이용한 암 분류규칙을 생성한다. 림프종 유전발현 데이터에 대하여 실험해본 결과, 90% 수준의 인식 성능을 보였고, 또한 모든 샘플을 완벽하게 분류하는 산술 분류규칙을 발견하였다.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.37-39
• /
• 2002

UHF method is very effective to diagnosis for partial discharge of GIS. In generally, inner UHF sensor can be attached on sheath cover of GIS under construction for periodic inspection. However, there is no inner UHF sensor for GIS of the domestic substation. We used the outer UHF sensor attached on spacer for GIS of existing substation. In this paper, we report the diagnosis result of partial discharge on 800kV GIS in domestic substation. From these results, we can find the quantity, reason and location of PD and certificate the performance of UHF method for partial discharge diagnosis of GIS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.118-125
• /
• 2013

The synthetic fibers including Polyvinyl alcohol and Polyethylene fibers have been successfully used in the manufacture of high ductile fiber reinforced cementitious composites. Polypropylene (PP) fiber has also been used in composites, not for the purpose of achieving a high level of tensile ductility but to improve the fire resistance performance of concrete exposed to high temperatures. This paper discusses the method for enhancing the performance of composites supplemented with PP fiber. Five types of mixture proportions were designed with high volume fly ash for testing the performance of composites. Type I cement and fly ash F were used as binding materials. The water-to-binder ratio was 0.23~0.25, and the amount of PP fiber used was 2 vol%. Polystyrene bead were also used to increase the tensile ductility of composites. A series of experiments including slump, density, compression and uniaxial tension tests were performed to evaluate the performance of cementitious composites supplemented with PP fiber. From the test results, it was exhibited that the performance of composites supplemented with PP fiber can be enhanced by adopting the mechanics and statistics theory.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.28-36
• /
• 2019

The adhered mortars in recycled aggregate may lower the performance of the concrete, such as by reducing in strength and durability, and cracking. In the present study, the effects of nylon fiber (NF) on the mechanical and durable properties of 100% ordinary portland cement (OPC) and 50% ground granulated blast furnace slag (GGBFS) concretes incorporating recycled coarse aggregate (RA) were experimentally investigated. Concrete was produced by adding 0 and $0.6kg/m^3$ of NF and then cured in water for the predetermined period. Measurements of compressive and split tensile strength, water permeable pore and total charge passed through concrete were carried out, and the corresponding test results were compared with those of concrete incorporating crushed coarse aggregate (CA). In addition, the microstructures of 28-day concretes were observed by using SEM technique. Test results revealed that the RA concrete showed lower performance than CA concrete because of the adhered mortars in RA. However, it was obvious that the addition of NF in RA concrete was much effective in enhancing the performance of the concretes due to the bridge effect from NF. In particular, the application of NF2 (19 mm) exhibited a somewhat beneficial effect compared with concrete incorporating NF1 with respect to mechanical properties, especially for RA concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.74-82
• /
• 2024

In this study, feature point detection and displacement measurement performance depending on feature extraction algorithms were compared and analyzed according to environmental changes and target types in the feature point-based displacement measurement algorithm. A three-story frame structure was designed for performance evaluation, and the displacement response of the structure was digitized into FHD (1920×1080) resolution. For performance analysis, the initial measurement distance was set to 10m, and increased up to 40m with an increment of 10m. During the experiments, illuminance was fixed to 450lux or 120lux. The artificial and natural targets mounted on the structure were set as regions of interest and used for feature point detection. Various feature detection algorithms were implemented for performance comparisons. As a result of the feature point detection performance analysis, the Shi-Tomasi corner and KAZE algorithm were found that they were robust to the target type, illuminance change, and increase in measurement distance. The displacement measurement accuracy using those two algorithms was also the highest. However, when using natural targets, the displacement measurement accuracy is lower than that of artificial targets. This indicated the limitation in extracting feature points as the resolution of the natural target decreased as the measurement distance increased.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.457-465
• /
• 2011

The fault analysis and detecting algorithm for a 3 phase diode rectifier is proposed. The 3 phase dioderectifier is used for the AC power rectifier of the PWM inverter. The input power or diode faults cause theripples of the DC voltage, degradation of the control performance and life shortening of the DC link capacitor.In this paper, the ripple of the DC voltage is mathematically analyzed for the earth fault of input power andopen circuit fault of the diode, respectively. The fault detection and type of fault can be obtained by comparingthe average DC voltage and the instant DC voltage which is sampled with 6 times of grid frequency. Theproposed method can be easily applicable and doesn't require additional circuit. The experimental and simulationresults are presented to verify the validity of the proposed method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.110-115
• /
• 2010

This study was conducted to estimate the feasibility using thermal image measurement that is applicable to internal leak diagnosis for the power plant valve. Abnormal heating of valve surface associated with high temperature steam f10w toward valve outlet side in the condition of low temperature is a primary indicator of leakage problems in high temperature and pressure valves. Thermal imaging enables to see the invisible thermal radiation that may portend impending damage before their condition becomes critical. When steam flow in valve outlet side in the condition of low temperature is converted into heat transmitted through the valve body due to the internal leakage in valve. The existence of abnormally increasable leakage rate in the valve will result in abnormally high levels of heat to be generated that can be quickly identified with a thermal image avoiding energy loss or damage of valve component. From the experimental results, it was suggested that the thermal image measurement could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.187-193
• /
• 2018

There has been a gradual increase in the demand for the electric power in Korea. In order to meet the demand, power station should have technical functions with increased effectiveness. When accident happens in electric machinery at power stations, huge amount of economic losses and mulfunction of equipments occur. One of the accidents is a deteriorated cables operating power stations. In order to prevent cable accident in advance, we should monitor the insulation status of the cable. Cable accidents are resulting from the junctions. We have developed and installed a device in order to identify the status of junction part of power cable at Korea Western Power Co., Ltd.. We performed an accurate diagnosis for the stable utilization of junctions where the accidents occurs most frequently, and to increase the reliability. In this paper, we present the concepts of our device and the method of monitoring diagnosis for the stable use of junctions at cables predicting the life time of cables by analyzing the data obtained by the device. We also present the hardware aspect of the device we have developed.