• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.621-626
• /
• 2021

In this study, data on the study site for apartment construction was acquired, and the quantity of construction waste was calculated using a drone and mobile 3D laser scanner. The accuracy of the drone was 0.034 to 0.064m in the horizontal and vertical directions, respectively, and the mobile 3D Laser Scanner showed an accuracy of 0.018 to 0.049m in the horizontal direction, respectively. These results suggest that it is possible to construct spatial information using a drone and mobile 3D laser scanner with a value within the allowable accuracy of 1:1,000 digital terrain. The volume of construction waste calculated using the mobile 3D laser scanner data was 70,797㎥. It was possible to calculate the volume on the side of the building or some facilities that appeared as shaded areas in the drone outcomes. In addition, modeling was performed for view analysis of the apartments scheduled to be constructed and the terrain-based modeling results of the surrounding buildings. In the future, data construction and accuracy evaluation using mobile 3D laser scanners will be conducted. In addition, additional research comparing existing methods and work processes will be carried out, and the efficiency of mobile 3D laser scanners in the field of spatial information construction can be presented.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.22-29
• /
• 2019

Validamycin A is an aminoglycoside fungicide produced by Streptomyces hygroscopicus that inhibits trehalase. The purpose of this study was to develop a method for detecting validamycin A in agricultural samples to establish MRL values for use in Korea. The validamycin A residues in samples were extracted using methanol/water (50/50, v/v) and purified with a hydrophilic-lipophilic balance (HLB) cartridges. The analyte was quantified and confirmed by liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive ion mode using multiple reaction monitoring (MRM). Matrix-matched calibration curves were linear over the calibration ranges (0.005~0.5 ng) into a blank extract with $R^2$ > 0.99. The limits of detection and quantification were 0.005 and 0.01 mg/kg, respectively. For validation validamycin A, recovery studies were carried out three different concentration levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n = 5) with five replicates at each level. The average recovery range was from 72.5~118.3%, with relative standard deviation (RSD) less than 10.3%. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the NIFDS (National Institute of Food and Drug Safety) guideline (2016). Therefore, the proposed analytical method is accurate, effective and sensitive for validamycin A determination in agricultural commodities.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.175-190
• /
• 2022

Abusive supervision occurs in a social context in which third-party observers react and interact with the abused victims and supervisors. Despite the importance of third-party observers' behavior in abusive supervision, research on abusive supervision has mainly focused on the dyadic relationship between direct victims and supervisors. Although in recent years research on third parties' reactions to peer abusive supervision has attracted growing attention, there are still insufficient studies examining the topic especially within domestic research in Korea. As such, this study comprehensively reviews empirical studies on third parties' reactions to peer abusive supervision and aims to broaden the scope of research in the field. Firstly, the results of previous studies show that the effects of observed peer abusive supervision are mediated by cognitive and affective processes. Secondly, previous studies are found to investigate the boundary conditions where the effects of observed peer abusive supervision can be amplified or mitigated with regard to various outcomes. Overall, compared to research on direct victims, research on third-party observers of abusive supervision is found to capture a wider spectrum of responses. In order to explain the mechanisms of this phenomena, this study thoroughly examines theoretical assumptions presented in previous studies and categorizes them into five theory types. Finally, this study identifies a couple of central methodological issues, including common method bias and inadequate model specification in the literature and suggests future research directions.

• Communications of Mathematical Education
• /
• v.34 no.3
• /
• pp.215-234
• /
• 2020

With the advent of the AI, the need to use AI in the field of education is widely recognized. The purpose of this study is to shed light on how prospective mathematics teachers perceive the need for AI and the role of teachers in future mathematics education. As a result, with regard to teaching, prospective teachers recognized that the use of AI in school mathematics is a demand of a new era, that various types of lesson can be implemented, and that accurate knowledge and information can be delivered. On the other hand, they recognized that AI has limitations in having cognitive and emotional interactions with students. As for mathematics learning, the prospective teachers recognized that AI can provide individualized learning, be used for supplementary learning outside of school, and stimulate students' interest in learning. However, they also said that learning through AI could undermine students' ability to think on their own. With regard to assessment, the prospective teachers recognized that AI is objective, fair and can reduce teachers' workload, but they also said that AI has limitations in evaluating students' abilities in constructed-response items and in process-focused assessment. The roles of teachers that the prospective teachers think were to conduct a lesson, emotional interaction, unstructured assessment, and counseling, and those of AI were individualized learning, rote learning, structured assessment, and administrative works.

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.646-651
• /
• 2014

To evaluate the processing adaptability of burdock (Arctium lappa L) tea, the physicochemical properties of burdock tea treated with steaming and roasting were investigated. The tea treatments included hot-air drying after roasting (HDR, drying at $60^{\circ}C$ for 6 hr), steaming after hot-air drying (SHD, steaming at $100^{\circ}C$ for 10 min), and steaming and then hot-air drying followed by roasting (SHDR, roasting at $250^{\circ}C$ for 3 min). The physicochemical properties, antioxidant activities, and sensory properties of the HDR, SHD, and SHDR teas were measured in hot water, and the tea was extracted from each sample. The color values of lightness (L) and yellowness (b) were lower in the HDR and SHDR teas, and the total sugar content of the SHDR tea was significantly higher than that of the other teas. The ABTS and DPPH radical scavenging abilities of the SHDR tea with a 500 mg% concentration were significantly higher than those of the SHD tea. In the sensory evaluation, the SHDR tea was ranked significantly higher than the other samples as to its color, flavor, taste, and overall acceptability. The results suggest that SHDR can be applied to burdock tea to achieve high quality and functionality.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.514-523
• /
• 2019

Purpose: This study was designed to provide necessary institutional improvements for job security for foreign workers in the domestic construction sector. Method: I analyzed the National Statistical Office and related reports to investigate the status of foreign workers. Based on this, the government came up with measures to improve the system. Results: Based on the current comparative advantage index (RCA) analysis, the technology standard of foreign workers compared to Korean workers was evaluated, and the results were analyzed in order of moldwork, rebar, concrete work, stone work, and waterproof work. Conclusion: A foreign worker's work system was introduced to solve the problem of local Lunar New Year's Day field manpower. To ensure stable implementation of the system, there is a need to improve the operation of the employment permit system at construction sites and limit the size of the construction industry that introduces the employment permit system.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.335-356
• /
• 2022

Universities contribute to the development of the country and society by cultivating professional manpower with knowledge and qualifications as democratic citizens through education and research activities. To this end, the government is improving the basic capabilities of universities and supporting autonomous innovation through university financial support projects. Since the financial support project differentially supports the government's finances limited to universities with a comparative advantage through fair evaluation, the role and function of the university library, a basic educational facility and core institution that supports education and research, is important. However, university libraries have not been able to actively participate in the government's financial support projects due to financial and manpower shortages, poor environments such as facilities, facilities, and spaces, and low participation rates for students. Therefore, this study investigated and analyzed the program operation cases of 18 university libraries in which libraries participated among 45 universities selected for the ACE project (2010-2016), derived problems and implications, and questioned the roles and achievements of university libraries. Based on the results, strategies and measures to be considered by university libraries in preparation for the government's university financial support projects were proposed.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.98-104
• /
• 2008

This research was performed to evaluate the extraction characteristics of heavy metals for soil washing of mine tailings-contaminated soil according to particle size distribution and the chemical distributional existence of the metals. As the soil particle size was decreased, the extracted concentrations of heavy metals was increased except Fe and Mn. Most of all heavy metals were extracted within 6 h by soil washing with 0.05 M EDTA. Extraction efficiency of metals was decreased for Pb, Cu, and Zn with decreasing of particle size. Significant difference was not observed in extraction efficiency for Cd according to particle size distribution. Extraction efficiency for Cd was the highest as 86~91%, while the lowest as 5~14% for Fe. Most metals of the soil without soil washing was distributed as reducible, oxidizable, and residual fractions. Pb, Zn, and Cd existed as reducible (Fe/Mn oxide) and residual fractions and Cu existed as oxidizable and residual fractions after soil washing treatment with 0.05 M EDTA. As the soil particle size was decreased, residual fraction was increased for Pb and Cu. About 90% of reducible fraction in Pb, Zn, and Cd was removed by soil washing with 0.05 M EDTA. As the results, it was founded that soil particle size was the important parameter to effect on distributional fraction and extraction efficiency of metals in mine tailings-contaminated soil.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.29-33
• /
• 2019

With shrinking form factor and improving performance of electronic packages, high input/output (I/O) density is considered as an important factor. Fan out wafer-level packaging (FO-WLP) has been paid great attention as an alternative. However, FO-WLP is vulnerable to warpage during its manufacturing process. Minimizing warpage is essential for controlling production yield, and in turn, package reliability. While many studies investigated the effect of process and design parameters on warpage using finite element analysis, they did not take uncertainty into consideration. As parameters, including material properties, chip positions, have uncertainty from the point of manufacturing view, the uncertainty should be considered to reduce the gap between the results from the field and the finite element analysis. This paper focuses on the effect of uncertainty of Young's modulus of chip on fan-out wafer level packaging warpage using finite element analysis. It is assumed that Young's modulus of each chip follows the normal distribution. Simulation results show that the uncertainty of Young's modulus affects the maximum von Mises stress. As a result, it is necessary to control the uncertainty of Young's modulus of silicon chip since the maximum von Mises stress is a parameter related to the package reliability.

• Journal of Korea Water Resources Association
• /
• v.40 no.10
• /
• pp.769-781
• /
• 2007

Factor analysis has been usually employed in reducing quantity of data and summarizing information on a system or phenomenon. In this analysis methodology, variables are grouped into several factors by consideration of statistic characteristics, and the results are used for dropping variables which have lower weight than others. In this study, factor analysis was applied for extracting primary factors influencing multi-dam system operation in the Han River basin, where there are two multi-purpose dams such as Soyanggang Dam and Chungju Dam, and water has been supplied by integrating two dams in water use season. In order to fulfill factor analysis, first the variables related to two dams operation were gathered and divided into five groups (Soyanggang Dam: inflow, hydropower product, storage management, storage, and operation results of the past; Chungju Dam: inflow, hydropower product, water demand, storage, and operation results of the past). And then, considering statistic properties, in the gathered variables, some variables were chosen and grouped into five factors; hydrological condition, dam operation of the past, dam operation at normal season, water demand, and downstream dam operation. In order to check the appropriateness and applicability of factors, a multiple regression equation was newly constructed using factors as description variables, and those factors were compared with terms of objective function used in operation water resources optimally in a river basin. Reviewing the results through two check processes, it was revealed that the suggested approach provided satisfactory results. And, it was expected for extracted primary factors to be useful for making dam operation schedule considering the future situation and previous results.