• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1055-1063
• /
• 2013

Low noise amplifiers(LNAs) are an integral component of RF receivers and are frequently required to operate at wide frequency bands for various wireless systems. For wideband operation, important performance metrics such as voltage gain, return loss, noise figures and linearity have been carefully investigated and characterized for the proposed LNA. An inductive shunt feedback configuration is successfully employed in the input stage of the proposed LNA which incorporates cascaded networks with a peaking inductor in the buffer stage. Design equations for obtaining low and high input matching frequencies are easily derived, leading to a relatively simple method for circuit implementation. Careful theoretical analysis explains that poles and zeros are characterized and utilized for realizing the wideband response. Linearity is significantly improved because the inductor between gate and drain decreases the third-order harmonics at the output. Fabricated in $0.18{\mu}m$ CMOS process, the chip area of this LNA is $0.202mm^2$, including pads. Measurement results illustrate that input return loss shows less than -7 dB, voltage gain greater than 8 dB, and a little high noise figure around 7~8 dB over 1.5~13 GHz. In addition, good linearity(IIP3) of 2.5 dBm is achieved at 8 GHz and 14 mA of current is consumed from a 1.8 V supply.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.26-37
• /
• 2009

Ministry of Land, Transportation and Marine Affairs(MLTM) has implemented Construction CALS project for improving productivity of construction industry and for making construction project management efficient by responding to informatization and knowledge base society in 21st century. CALS has beeb applied successfully to projects form MLTM, however, the outcomes of Construction CALS hasn't been recognized. In addition, there is no way to find how high the level of Construction CALS is when it is compared with other SOC informatization projects. This study found out the informatiziation level of Construction CALS by using the evaluation index proposed in the former study, and by comparing with other sectors. The evaluation on the level was implemented in the three parts such as informatization infrastructure(network, hardware, standardization, data, informatization, informatization security), informatization utilization(information usage, IT performance), and informatization support(informatization goal, organization of informatization, informatization investment, informatization education), and then, this evaluation was compared with "Assessment for level of industry information system", "Assessment for level of small and midium sized industry information system", and "IICI(Informatizaion Index for the Construction Industry)". With the result from the comparison, this study produced superior factors and inferior factors for each sector. These results are expected to be useful for prioritizing budget allocation by finding out the informatization level of Construction CALS.

• Information Systems Review
• /
• v.10 no.1
• /
• pp.135-164
• /
• 2008

This research is to offer a structured yet practical ex-ante evaluation methodology for IT investment. Benchmarking the best practices of four Korean organizations, we try to integrate core processes, relevant measures, and evaluation dimensions into a consistent and wholesome body of evaluating methodology. The best practices we considered encompass a wide range of business enterprises, including for-profit, non-profit, service-oriented, and manufacturing entities. The proposed methodology consists of three stages; the first stage checks the validity of investments by looking into comprehensiveness of planning, willingness to accomplish, justifiable grounds for the investments, overlapping investments, and obstructing risks; the second do so by putting an IT investment into economic, strategic, and technological perspectives; and the last third would produce a unified quantity that summarizes outcome of the previous stages. Incorporating the proven knowledge, guidelines, and quantifying tools, the methodology could make a valuable reference model for IT evaluation practitioners who have been bedeviled by having to going through such ex-ante evaluations.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.95-108
• /
• 2015

Nano-sized iron colloids are formed as acid mine drainage is exposed to surface environments and is introduced into surrounding water bodies. These iron nanomaterials invoke aesthetic contamination as well as adverse effects on aqueous ecosystems. In order to control them, the characteristics of their behaviour should be understood first, but the cumulative research outputs up to now are much less than the expected. Using zero-valent iron (ZVI) and magnetite, this study aims to investigate the behaviour of iron nanomaterials according to the change in the composition and pH of background electrolyte and the concentration of natural organic matter (NOM). The size and surface zeta potential of iron nanomaterials were measured using dynamic light scattering. Characteristic behaviour, such as aggregation and dispersion was compared each other based on the DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory. Whereas iron nanomaterials showed a strong tendency of aggregation at the pH near point of zero charge (PZC) due to electrostatic attraction between particles, their dispersions became dominant at the pH which was higher or lower than PZC. In addition, the behaviour of iron nanomaterials was likely to be more significantly influenced by cations than anions in the electrolyte solutions. Particularly, it was observed that divalent cation influenced more effectively than monovalent cation in electrostatic attraction and repulsion between particles. It was also confirmed that the NOM enhanced the dispersion nanomaterials with increasing the negative charge of nanomaterials by coating on their surface. Under identical conditions, ZVI aggregated more easily than magnetite, and which would be attributed to the lower stability and larger reactivity of ZVI.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.246-251
• /
• 2006

마이크로어레이 실험은 수 천에서 수 만개의 유전자 발현 결과를 동시에 측정할 수 있어 질병의 발현 형질 분류 등에 유용하게 이용되고 있다. 그러나 마이크로어레이 실험은 동일한 플랫폼의 실험이라 할지라도 환경 등에 따라 그 실험 결과에 차이가 나는 등 오차를 항상 포함하고 있다. 또한 마이크로어레이 실험은 아직 고가의 실험으로 분류되어 다수의 샘플에 대한 반복 실험 결과를 얻기 어려운 상황이다. 따라서 이종의 플랫폼, 데이터 포맷, 정규화 기법 등이 서로 다른 데이터를 효율적으로 통합하여 유용한 정보를 추출하는 새로운 방식의 개발이 필요하다. 본 논문은 이와 같은 문제를 해결하기 위한 기초 단계 연구 결과이다. 마이크로어레이 실험 데이터로부터 통계적 방법을 이용하여 유의(informative) 유전자를 추출하고 유전자 온톨로지(Gene Ontology : GO)와의 연계를 통하여 유전자 정보의 기능적 분류 결과를 사용자에게 제공하는 유전자 기능 분석 시스템의 설계 및 구현 방안을 보인다. 본 시스템의 실험방법에서는 3-Fold Filtering 기법을 통하여 발현 차가 큰 유전자를 추출하고, t-검정 기법에 의하여 이들 유전자를 순위화 하였으며, 이 중 상위 100개의 유전자를 유의 유전자로 추출하였다. 다음, 이 들 유의 유전자의 t-검정 값을 GO의 유전자 기능을 나타내는 해당 텀 (term)에 가중치로 부과하여 각 유전자들과 기능적으로 연관성이 높은 텀들을 추출한다. 또한 본 연구의 유효성을 검증하기 위하여 본 시스템에 의한 마이크로어레이 데이터 분석 결과를 전문가에 의한 유전자 기능 분석 결과와 비교한다.투명성 있는 서비스를 제공하고 높은 신뢰성과 안정성이 확보될 수 있도록 구성하고자 한다. Query 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate

• Clinical and Experimental Pediatrics
• /
• v.48 no.11
• /
• pp.1239-1243
• /
• 2005

Purpose : Iron accumulation interferes with hepatic insulin extraction and affects insulin synthesis and secretion. The purpose of this study is to investigate the correlation between serum ferritin and type 2 diabetes mellitus. Methods : We compared the serum ferritin level among 18 patients in an impaired glucose tolerance (IGT) group, 36 in a type 1 diabetes group, eight in a type 2 diabetes group and 29 in a healthy control group. The correlation between serum ferritin levels and sex, body mass indices(BMI), blood pressure(BP), serum fasting sugar level and serum fasting insulin level were also analyzed. Results : The mean log ferritin were $1.33{\pm}0.32$(healthy control group), $1.63{\pm}0.19$(IGT group) and $1.90{\pm}0.30$(type 2 diabetes group). In the IGT group, log ferritin was higher than in the healthy control group(P=0.001). The log ferritin of the type 2 diabetes group was higher than that of the healthy control group(P=0.001). Comparing log ferritin to other factors, log ferritin had a significant positive correlation with body mass indices(P<0.001), systolic blood pressure(P=0.001), and fasting glucose(P=0.001), fasting insulin(P=0.002). Conclusion : Compared to the normal healthy group, serum ferritin concentrations were significantly higher in the IGT group and the type 2 diabetes group. The elevation of serum ferritin concentration may be a risk factor of type 2 diabetes mellitus.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.599-614
• /
• 2014

When tunnelling with TBM (Tunnel Boring Machine), accessibility to tunnel face is very limited because tunnel face is mostly occupied by a bunch of machines. Existing techniques that can predict ground condition ahead of TBM tunnel are extremely limited. In this study, the TBM Resistivity Prediction (TRP) system has been developed for predicting anomalous zone ahead of tunnel face utilizing electrical resistivity. The applicability and prediction accuracy of the developed system has been verified by performing field tests at subway tunnel construction site in which an EPB (Earth Pressure Balanced) shield TBM was used for tunnelling work. The TRP system is able to predicts the location, thickness and electrical properties of anomalous zone by performing inverse analysis using measured resistivity of the ground. To make field tests possible, an apparatus was devised to attach electrode to tunnel face through the chamber. The electrode can be advanced from the chamber to the tunnel face to fully touch the ground in front of the tunnel face. In the 1st field test, none of the anomalous zone was predicted, because the rock around the tunnel face has the same resistivity and permittivity with the rock ahead of tunnel face. In the 2nd field test, 5 m thick anomalous zone was predicted with lower permittivity than that of the rock around the tunnel face. The test results match well with the ground condition predicted, respectively, from geophysical exploration, or directly obtained either from drilling boreholes or from daily observed muck condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1245-1254
• /
• 2008

Proposing a method for the estimation of the social cost for global warming impact (external cost) is the aim of this paper. Both the endpoint approach and conjoint analysis were applied to estimating the social cost for global warming. The endpoint approach was used to assess the damage on the safeguard subjects by global warming due to the emission of greenhouse gases into the atmosphere. The conjoint analysis was used to estimate the economic values for safeguard subjects which measure the social preferences and willingness to pay (WTP) on safeguard subjects. The economic values of human health and social asset were estimated at 62,261,700 Won / DALY (yr) and 10,000 Won / 10,000 Won, respectively. Moreover, cost factors of GHGs were calculated by multiplying the damage factor which is quantified the unit damage on safeguard subject and the economic value. In the case of CO$_2$, the cost factor was calculated at 13.52 Won / kg (13,520 Won / ton). External cost of products or services can be calculated by multiplying the GHG inventory result of products or services by the cost factor of each GHG. inventory.

• Journal of Labour Economics
• /
• v.30 no.3
• /
• pp.1-41
• /
• 2007

Since Korea experienced a 'jobless growth' in 2003, creating jobs in the service sector has been considered as a top priority employment agenda. However, despite high employment outcomes in services, labor productivity remains stagnant in the service sector in recent years. A great deal of concern has been raised regarding newly created service jobs. Critics say low productivity in the service sector will harm the engine of economic growth in our country. This paper investigates the side of the demand for quality of labor, namely, the demand for skills as one of the main source of low productivity in the service sector. To analyze the changes of skills demand, this paper suggests the concept of job-based skills instead of worker-based skills and presents the way of constructing measures of job-based skills. By means of common factor analysis using job information in the Korean Dictionary of Occupational Titles, I extract 4 direct measures of job-based skills, such as cognitive skills, physical skills, fine skills, interactive skills. These skill measures are used to explore and to test how the skill structure changed in the service sector during 2002-2006. Empirical Results show that whereas the goods sector makes progress toward upskilling being represented by increased cognitive elements and softenization of tasks, the service sector, although high-educated workers increased, exhibits trends of deskilling in the sense of job-based skills during 2002-2006 in Korea. The trend of deskilling however does not seem a general aspect in the overall service sector. Rather, it seems a compound process that high-skilled jobs are created, but, on the other hand low-skilled jobs requiring physical labor are produced at the same time.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.151-151
• /
• 2011

오늘날 에너지문제는 인류가 직면한 가장 중요한 당면과제 중 하나이다. 석유, 석탄과 같은 화석에너지는 점점 고갈되어 가고 있으며, 이산화탄소 배출로 인한 기후변화도 해결이 시급한 문제이다. 이러한 문제들을 해결하기 위한 방안으로 신재생에너지의 중요성이 부각되고 있다. 특히 신재생에너지 기술 중 태양전지는 미국, 일본, 유럽, 중국 등 많은 국가에서 기술개발 및 보급에 앞장서고 있으며, 시장선점을 위한 기술개발 경쟁이 치열하다. 또한 연료전지의 경우 전기와 열을 동시에 생산 가능하며, 다른 에너지 변환기보다 훨씬 높은 효율을 가지고 있어 신에너지원으로서 주목받고 있다. 이와 함께 기후변화에 실질적인 해결책으로 세계는 CCS에 기대하고 있으며, 기술개발 및 실증을 위한 국제공동연구도 활발하게 진행 중이다. 본 논문에서는 이러한 중요성을 인식하여 태양전지, 연료전지 그리고 CCS에 대하여 국내외 에너지기술 활용도를 분석하였다. 활용도 분석을 위하여 특허등록건수, 특허의 피인용 정보와 이를 활용한 CPP지수를 산출하였다. 오늘날 특허는 국가나 기업 등 특정 주체에 대한 기술력 또는 혁신성을 측정하거나, 기술개발 동향을 파악하기 위한 중요한 정보로 사용된다. 특히 CPP지수(특허당 피인용지수)는 분석대상(국가, 기업 등)의 특허가 이후의 기술혁신 활동에 어느 정도의 활용되어 영향을 미쳤는가를 보여주는 지표로써, 특정 국가나 기업의 기술혁신 활동의 수준 및 혁신성과의 가치를 살펴 볼 수 있다. 이를 통하여 국내의 에너지기술 경쟁력을 살펴보고 시사점을 도출하였다. 우선 특허데이터 수집을 위하여 톰슨 이노베이션을 활용하여 2001년부터 2010년까지 미국, 일본, 유럽, 한국에 등록된 특허를 검색하였으며, 특허등록번호를 중심으로 중복데이터를 제거하였다. 또한 특허명칭, 요약정보를 통하여 노이즈를 제거하였다. 노이즈가 제거된 특허를 활용하여 기술별, 국가별 기술개발 동향을 살펴보았으며, CPP지수를 통하여 기술별, 국가별 활용도를 분석하였다. 분석 결과, 태양전지의 경우 대부분의 국가에서 특허건수가 매년 증가함에 따라, 지속적으로 기술경쟁이 심화되고 있는 것으로 분석되었다. 또한 한국의 CPP지수는 미국, 일본 등 주요 경쟁국가에 비해 상당히 낮게 나타나 기술 활용 수준이 낮은 것으로 분석되었다. 따라서 핵심기술 개발과 같은 에너지기술의 질적수준을 높이기 위한 대책마련이 필요한 실정이다. 본 논문의 결과를 통하여 특허를 위한 기술개발이 아닌 보다 활용성이 높은 기술개발이 이루어지기를 바라며, 나아가 국가에너지기술 경쟁력을 높이는데 기여할 것으로 기대한다.