According to the 2007 International Society for Heart and Lung Transplantation (ISHLT) report, a congenital diagnosis, infantile transplantation and being on extracorporeal membrane oxygenation (ECMO) at the time of transplant are risk factors for mortality for the patients who undergo a heart transplant, and a large body weight ratio also increases the risk of mortality. The patient of this case underwent a Ross operation and mitral valve repair due to left ventricle outflow track obstruction and mitral regurgitation. But the baby was treated with ECMO due to heart failure after the operation. When he was 3-months-old and had been. on 30 days of ECMO, he underwent a heart transplant with a heart that had a high donor-recipient weight ratio (4.42). We present this case from a technical standpoint and we include a review of the relevant literature.
Journal of the Korean Institute of Telematics and Electronics C
/
v.35C
no.11
/
pp.21-30
/
1998
In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.
A filamentous fungus, strain FB01 showing high $\beta$-glucosidase activity was isolated from a compost. This fungus was cocultured with Trichoderma viride to enhance the productivity of $\beta$-glucosidase by changing inoculation time of the fungus. The microbial consortium showed higher cellulolytic enzyme production than T. viride alone. The maximal enzyme production was obtained when the microbial consortium was cultured at 30$\^{C}$ and pH 6.0 for 10 days with the activities of CMCase, $\beta$-glucosidase, and avicelase of 2.0, 0.8, and 0.2 U/mL, respectively. These enzyme activities were 2, 4, and 2 times as high as those of CMCase, p-glucosidase, avicelase from T. viride, respectively, indicating that a synergistic interaction appeared between T. viride and strain FBOI . The serial subcultures with pH control increased $\beta$-glucosidase production about 3.2 times. Enzyme production using ricestraw as a carbon source showed that the activities of CMCase, $\beta$-glucosidase, and avicelase were 3.69, 0.76, 0.17 U/mL, respectively, and $\beta$-glucosidase activity was 1.5 times higher than that of T viride.
System developments by components are accomplished by creating new software based on independent components having respective function. Generally, component-based software developments are expected to obtain profits caused by reuse of software, such as improvement of quality, rapid development, and efficiency of maintenance. In a component-based system, the most important goal and also key to success is to identify and construct high quality components that may increase reusability. Therefore, it is necessary for component developers to understand strong and weak points of existing component development methodologies in the aspect of identification of component, and to select the most appropriate methodology for the system to be constructed. It is also necessary for component developers to develop a new methodology enabling effective identification of independent components through modification and/or complementation of existing methodologies. The modification and complementation needs comparison and analysis of various existing methodologies. Accordingly, the this paper is to provide explanation for some widely used methodologies representing the existing component-based software development methodologies such as RUP(Rational Unified Process) of Rational company[1,9], CBD96 of Computer Associates company[2,3], UNIFACE of Compuware company[5], and UML components methodology derived from extending of the component developing method of CBD96 by Cheesman and Daniels[4]. The this paper is also to point out respective problems of the representative existing methodologies. Furthermore, component identification methodologies are compared and analyzedon the whole through this paper.
The purpose of this study is to develop the competency model of specialized vocational school teachers as admission officers. Whereas professional admission officers deal with a variety of admission activities in universities, teachers are responsible for admission duties in specialized high schools in Korea. Therefore, it is necessary to identify the core competencies required for teachers responsible for admission duties in specialized high school settings. In order to develop a competency model, factor analysis was completed for the survey results of 191 teachers who teach in specialized vocational high schools in Seoul, Korea. For evaluating validity of the competency model, the responses from those who had high experiences in admission duties and the average teachers were compared. As a result, this study identified a total of 14 competencies in three competency areas. The competencies required for specialized high school teachers include responsibilities for admission officers, ethics for evaluators, communication skills, teamwork, understandings of admissions process for specialized vocational high school, developing evaluation criteria, generating interview questions, increasing interrater reliability, interview skills, simultaneous evaluation of interviewees, quantification of evaluation results, synthesis of evaluation results, and decision making skills.
Journal of the Korean Recycled Construction Resources Institute
/
v.9
no.3
/
pp.303-310
/
2021
Cracks in bridges are important factors that indicate the condition of bridges and should be monitored periodically. However, a visual inspection conducted by a human expert has problems in cost, time, and reliability. Therefore, in recent years, researches to apply a deep learning model are started to be conducted. Deep learning requires sufficient data on the situations to be predicted, but bridge crack data is relatively difficult to obtain. In particular, it is difficult to collect a large amount of crack data in a specific situation because the shape of bridge cracks may vary depending on the bridge's design, location, and construction method. This study developed a crack detection model that generates and trains insufficient crack data through a Generative Adversarial Network. GAN successfully generated data statistically similar to the given crack data, and accordingly, crack detection was possible with about 3% higher accuracy when using the generated image than when the generated image was not used. This approach is expected to effectively improve the performance of the detection model as it is applied when crack detection on bridges is required, though there is not enough data, also when there is relatively little or much data f or one class.
Jang, Sung Won;Lee, Ho Jin;Kim, So-Yeun;Lee, Du-Hyeong
The Journal of Korean Academy of Prosthodontics
/
v.60
no.3
/
pp.276-282
/
2022
Close communication between clinicians and dental technicians is an important factor in providing successful prostheses. The exchange of opinions with laboratories has mainly been in the form of written prescriptions and a photos, but it has been reported that information transmission may be limited. Currently, as digital technology-based prosthesis fabrication is common, 3D image objects can be stored on the web and can be easily viewed through a mobile web browser. In this article, we introduce cases where the design of the prosthesis was improved by designing the prosthesis using CAD software and reviewing the prosthesis designed with the clinical side through a web viewer. Through this protocol, it was possible to improve the occlusal surface and crown contour, the opposing teeth condition, the size of the gingival embrasure, and the shape of pontic. The process of sharing, discussing, and modifying the prosthesis design with the clinician and technician through a web viewer contributes to reflecting the diversity of oral conditions and individualized needs, thereby helping to make functional and esthetic prostheses.
Yang, Ji Hye;Sung, Bo Mi;Kim, Mi Hwa;Jung, Hyun Sook;Cha, Myeong Hwa;Ryu, Kyung
Journal of the Korean Society of Food Science and Nutrition
/
v.43
no.11
/
pp.1774-1784
/
2014
The purpose of this study was to determine obstructive factors and performance level of the HACCP system among elementary schools in Gyeongbuk province. E-mail survey targeted 320 dieticians, and recovery rate was 74.1%. Consequently, 227 responses were analyzed. The questionnaire was composed of 58 items under four sections (general characteristics, dieticians' perceived HACCP performance level, dieticians' perceived CCP performance level, and obstructive factors of HACCP system implementation). The item with the highest rate of HACCP performance level was 'HACCP training for foodservice employees in schools ($4.02{\pm}0.70$)' while the lowest counterpart was 'implementation of HACCP team meeting, reporting, and maintenance ($2.74{\pm}0.99$)'. The performance level of the item 'HACCP training for foodservice employees in schools' was perceived as highest when the number of students eating school meals was greater than 1,101 (P<0.05). Moreover, CCP 4 ($4.44{\pm}0.53$) and CP 5 ($4.44{\pm}0.51$) showed the best performance, whereas CCP 1 showed the lowest performance level ($3.90{\pm}0.60$). Therefore, reinforcement of hygiene instruction in menu planning is perceived as necessary. CCP 1, CCP 6 (P<0.05), and CCP 3 (P<0.001) showed significant differences in performance based on the number of students eating school meals. Further, according to results regarding obstructive factors of HACCP system execution, 'general factor' was the most severe obstructive factor in the application of HACCP ($3.46{\pm}0.62$). Among the 'factors pertaining to dieticians', the item 'hardship of proper monitoring and micro-management due to overwhelming workload' was most influential ($3.46{\pm}0.96$). Furthermore, the item 'low budget allocation by educational offices ($3.90{\pm}0.88$)' was influential among the 'factors pertaining to school administrations'. In conclusion, the results of this research can help solve obstructive factors of elementary school food services and provide knowledge that is essential for the proper implementation of HACCP.
The purpose of this study was to investigate science integrated process skill of the students in science education center for the gifted. In order to do this, 'free-response test for the assessment of science process skills' developed by Yu-Hyang Kim(2013) was administered to 102 students(15 in elementary school science class, 58 in middle school science class I, and 29 in middle school science class II) who attend the program of science education center for the gifted in C university. The assessment tool measured 9 skills ; formulating inquiry questions, recognizing variables, formulating hypotheses, designing experiment, transforming data, interpreting data, drawing conclusions, formulating generalizations, and evaluating the designed experiments. As a result, the students in science education center for the gifted had relatively high scores in the area of 'formulating hypotheses' and 'recognizing variables', but they had relatively low scores in the area of 'transforming data', 'interpreting data', and 'evaluating the designed experiments'. The 2 items' percentage of correct answers were below 40% ; one is about a drawing a line graph in 'transforming data', and the other requires finding improvements of the experimental design in 'evaluation'. There was no significant difference between boys' scores and girls's one, and between the scores of students in the field of biology and those of students in the other fields(physics, chemistry, and earth science) in science integrated process skills. And there was significant difference according to the periods receiving the gifted education in 'formulating generalizations'. The teaching and learning has to focus on improving science integrated process skills in the program of science education center for the gifted and teaching and learning materials needs to be developed.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.24
no.11
/
pp.1055-1063
/
2013
Low noise amplifiers(LNAs) are an integral component of RF receivers and are frequently required to operate at wide frequency bands for various wireless systems. For wideband operation, important performance metrics such as voltage gain, return loss, noise figures and linearity have been carefully investigated and characterized for the proposed LNA. An inductive shunt feedback configuration is successfully employed in the input stage of the proposed LNA which incorporates cascaded networks with a peaking inductor in the buffer stage. Design equations for obtaining low and high input matching frequencies are easily derived, leading to a relatively simple method for circuit implementation. Careful theoretical analysis explains that poles and zeros are characterized and utilized for realizing the wideband response. Linearity is significantly improved because the inductor between gate and drain decreases the third-order harmonics at the output. Fabricated in $0.18{\mu}m$ CMOS process, the chip area of this LNA is $0.202mm^2$, including pads. Measurement results illustrate that input return loss shows less than -7 dB, voltage gain greater than 8 dB, and a little high noise figure around 7~8 dB over 1.5~13 GHz. In addition, good linearity(IIP3) of 2.5 dBm is achieved at 8 GHz and 14 mA of current is consumed from a 1.8 V supply.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.