• Journal of the Korean Geosynthetics Society
• /
• v.4 no.2
• /
• pp.3-9
• /
• 2005

Natural fiber mat made with compressed coconut mat and jute filter is in the spotlight recently as an alternative material for sand mat, which is getting expensive in Korea. Tensile strength and permeability tests for the natural fiber mat were carried out to evaluate for its practical use in this study. Despite of very low tensile strength of coconut mat, that of jute filter was satisfied with conventional criteria of geotextile suggested by Christopher and Holtz(1985). Besides, permeability of fiber mat under high compressive pressure was greater than that of conventional sand material used as sand mat. It was found that the fiber mat has a great potential in substituting the conventional sand material.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.17-27
• /
• 2013

This study is to prove the efficiency of geo-synthetics on the crushed stone layer by experiments. The strength of PET mat as reinforcing soft ground was verified through the loading experiments. Also, PP mat was used to protect the blockage of crushed stone layer by the filled soil, whose efficiency was examined according to loading and infiltration conditions. The crushed stones were penetrated into clay layer if the PET mat was removed, which was verified by loading experiments. In addition, the cohesioness of soil without PP mat made the blockage of stone layer easily, which reduced the infiltration capacity by about 98%.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.526-533
• /
• 2009

This study presents Mine Green Framework(M.G.F) which can protect the slope of rock and tailings. M.G.F method provides the fiber frame which helps the growth of the plant in the barren site like mined rock slope. M.G.F system consists of the polyester fiber mat, soil, seeds and anchors for the attachment. The optimum rate of filling materials was figured out by many germination tests in order to improve the effect of filling materials and the optimum rate of filling materials was applied in four test sites individually. High rooting rate over 70% was confirmed in all field tests. Especially the moisturizer was the most important component of filling materials and it could make the better condition for the plants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.101-109
• /
• 2008

Many researchers have reported that adding steel fiber to concrete improved its tensile and flexural strength significantly, but relatively few studies have been made on the compressive behavior of steel fiber-reinforced concrete. It is still less in case of high strength steel fiber-reinforced cementitious composites(SFRC). The main objective of this research is to examine the effect of adding steel fiber on the compressive strength of high strength SFRC using fiber reinforcing index(RI, $V_f(I_f/d_f)$). It was found from the study that compressive strength was noticeably increased in proportion to RI. In conclusion, the relationship between Reinforcing Index(RI) and compressive strength in case of high strength steel fiber-reinforced cementitious composites was suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.93-94
• /
• 2012

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.239-242
• /
• 2003

고분자 물질은 여러 가지 물질과 복합체를 형성하여 물리적 성질을 향상시켜왔다. 특히 유ㆍ무기물질의 복합체는 의류용, 산업용 차원에서 관심이 증대되고 있으며, 유ㆍ무기 입자가 첨가된 고분자 복합소재는 고분자 매트릭스에 기계적, 열적 특성을 향상시킬 뿐만 아니라 이들의 다양한 기능성을 부여할 수 있다.[1] 최근 수 십 년 동안 자연 오염문제로 인하여 섬유분야에서도 항균 처리가 관심이 증대되고 있다. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.381-382
• /
• 2010

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. Thus, fiber dispersion of ECC incorporated by recycled mineral wastes was evaluated to more accurately predict uniaxial tension behavior.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.422-425
• /
• 1998

섬유강화 복합재료는 고성능 섬유와 고분자 수지를 조합하여 재료의 물성 향상 및 고기능화를 목적으로 만들어지는 재료이며, 사용되는 고분자 매트릭스의 종류에 따라 열가소성 복합재료와 열경화성 복합재료로 나뉘어진다. 이 중 열경화성 복합재료에 관한 연구 및 그의 실용화는 오래 전부터 활발히 진행되어 산업재료 및 군사, 우주용 재료로 각광을 받아 왔으나 최근 지구 환경문제가 심각해지면서 사용 후 분해 및 재활용이 가능한 열가소성 복합재료에 관한 연구에 관심을 가지게 되었다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.435-438
• /
• 1998

Textile composites란 직물, 편성물, 브레이드 등을 사용한 섬유강화 복합재료의 총칭으로서 텍스타일이 지닌 뛰어난 기능을 매트릭스에 부가함에 따라 단일재료로는 얻지 못하는 뛰어난 공업재료를 만들 수 있다. 편성물은 직물이나 브레이드에 비해서, 변형특성도 매우 우수하고 고생산성이다. 복합재료에서 강화재로 편성물을 사용하는 경우, 섬유소재, 편조직, 편환 밀도 등을 고려하는 것에 의하여 편성물 강화 복합재료의 역학적 특성이 달라진다. (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.70-77
• /
• 1997

표면연소버너의 모재 중 최근 많은 관심을 끌고 있는 금속섬유를 이용한 LPG 및 COG의 연소특성을 파악하였다. 연소모드, 매트 표면온도분포, 공해물질 배출량, 버너 전후단 압력 손실을 측정한 결과, COG 연소시가 더 넓은 범위의 적열영역을 얻을 수 있었고, 매트의 평균 표면온도도 높았다. NOx 발생량은 100ppm 이하였고, 연소부하 50kcal/$ extrm{cm}^2$hr에서의 매트 전후단의 압력손실은 30mmH2O로 압력손실은 거의 없었다. 적열범위나 표면온도분포 등이 가스별로 약간의 차이를 보였으나, 매트의 종류에 크게 상관없이 안정연소를 달성할 수 있어 가스 특성이 상이한 각종 가스의 연소에 표면연소기술의 적용이 가능할 것이다.