• 제목/요약/키워드: 섬유강화플라스틱

검색결과 222건 처리시간 0.024초

CFRP 적층쉘의 고속 관통실험에 따른 에너지 흡수특성

  • 조영재;김영남;양인영
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 춘계학술대회 논문요약집
    • /
    • pp.62-62
    • /
    • 2004
  • 최근 신소재인 선진 복합 재료 중 탄소 섬유 강화 플라스틱(이하 CFRP라고 한다. )은 비강도, 비강성이 높기 때문에 경량화가 요구되는 여러 분야, 즉 항공기, 인공위성, 원자로, 자동차 산업분야, 조선 산업분야 등 널리 사용되고 있다. 경량화가 요구되는 분야에 사용되는 구조 부재의 형상은 평판보다는 다양한 형태의 곡면 형상을 뛰는 챌(Shell)의 형상을 갖는다. 또한 이러한 구조물에 충격이 가해 졌을 때 곡면을 갖는 구조물의 충격_응답 및 파괴형태는 평판과는 다른 양상을 보인다.(중략)

  • PDF

평직직조방법을 적용한 GFRP Sheet 제조에 관한 연구 (Manufacturing of GFRP Sheet Using Plain Weaving Method)

  • 김진우;김형석;이정훈;이동기
    • 대한기계학회논문집A
    • /
    • 제38권8호
    • /
    • pp.849-855
    • /
    • 2014
  • 유리섬유강화 플라스틱 복합재료의 압축성형 시, 모재와 유리섬유의 분리 없이 유동성이 우수하고, 불균질한 섬유배향이 없는 GFRP 복합재료 개발에 관한 체계적인 연구결과는 미흡한 실정이다. GFRP 복합재료를 사용하여, 자동차 부품 성형 시 발생하는 불균질도와 섬유배향 발생을 억제하는 많은 연구를 해왔으나 아직 해결되고 있지 않다. 본 연구에서는 위의 문제점들을 해결하기 위해 섬유유동성이 뛰어나고, 섬유배향이 발생하지 않고, 불균질성이 없으며, 구조안정성, 함침도, 기계적 특성 및 재활용성 등이 우수한 유리섬유강화 플라스틱 프리프레그를 제조하여, 수직교차형 평직직조방법을 적용하여, GFRP(Glass Fiber Reinforced Plastic) Sheet 를 제조한다.

적외선 열화상 기술을 이용한 복합재료의 결함 검출 정량화 연구 (Study on the Qualitative Defects Detection in Composites by Optical Infrared Thermography)

  • 박희상;최만용;박정학;김원태;최원종
    • 비파괴검사학회지
    • /
    • 제31권2호
    • /
    • pp.150-156
    • /
    • 2011
  • 본 논문에서는 현재 산업 전반에 널리 사용되고 있는 복합재료(탄소섬유강화플라스틱, 유리섬유강화플라스틱)의 비파과검사를 위한 광적외선 열화상기법을 이용한 복합재료 측정 표준기술개발을 위한 결함(인클루젼, 충간결함) 검출 기술을 실험하였다. 결함의 검출률을 높이기 위하여 위상잠금 방법을 활용하였다. 결과는 시험편의 두께에 따라 광원의 조사시간을 늘릴 경우 결함 검출의 확률이 높아진다는 것을 알 수 있다. 하지만 50 mHz 이하의 광원을 가하였을 때에도 결과값이 좋아지지 않는 점은 열확산이 재료 전체에 영향을 미치게 되면 결함 부위가 전체적으로 열평형 상태가 되어 결함 검출이 어려움을 파악할 수 있었다.

극저온에서 유리섬유강화플라스틱 표면의 유리섬유와 폴리우레탄 접착제간의 접착특성이 전체 박리강도에 미치는 영향에 대한 연구 (Investigation of Adhesion property between Glass Fiber Reinforced Plastic and Polyurethane adhesives on Peel strength under Gyogenic tempernture)

  • 손민영;이재광;홍정락
    • Composites Research
    • /
    • 제22권4호
    • /
    • pp.13-19
    • /
    • 2009
  • 접착제에 의한 접합기술은 다양한 목적과 환경에서 널리 사용되는 방법이다. 그 중 우레탄 접착제는 저온에서의 우수한 접착 특성으로 인하여 액화천연가스 운반선과 같은 극저온 환경의 접착에 사용되고 있다. 유사한 우레탄 접착제라도 각기 다른 기재와의 접착특성을 갖게 된다. 특히 기재에 사용된 수지의 종류와 섬유와의 상응성에 따른 접착력의 변화는 산업현장에서의 접착제 선정에 매우 중요한 인자로 작용된다. 본 연구에서는 서로 다른 제조사의 우레탄 접착제를 사용하여 동일한 리섬유강화복합재료에 접착하였을 때 실험 온도에 따른 다른 경향의 박리강도를 얻었다. 그 원인을 주사전자현미경을 사용하여 검토하였으며, 실혐 결과 극저온에서 접착제와 복합재료 수지간의 접착력은 거의 유사하였으나 접착제와 가재에 노출된 유리섬유간의 접착력이 달라짐에 따른 원인으로 확인하였다.

일방향 섬유강화 플라스틱 복합재의 점도에 미치는 성형인자의 영향 (Effect of Molding Parameters on Viscosity of Unidirectional Fiber Reinforced Plastic Composites)

  • 조선형;안종윤;윤성운
    • 한국생산제조학회지
    • /
    • 제9권6호
    • /
    • pp.41-48
    • /
    • 2000
  • The Compression molding process is widely used in the automotive industry to produce parts that are large, thin, light-weight, strong and stiff. Compression molded parts are formed by squeezing a glass fiber reinforced polypropylene sheet, known a glass mat thermoplastic(GMT), between two heated cavity surfaces. In this study, the anisotropic viscosity of the Unidirectional Fiber-Reinforced Plastic Composites is measured using the parallel plastometer and the composites is treated as an incompressible Newtonian fluid. The effects of molding parameter and fiber contents ratio on longitudinal/transverse viscosity are also discussed.

  • PDF

드릴에 의한 유리섬유강화플라스틱의 절삭특성에 관한 연구 (A Study on the Cutting Characteristics of the Glass Fiber Reinforced Plastics by Drill Tools)

  • 박종남;조규재
    • 한국정밀공학회지
    • /
    • 제21권3호
    • /
    • pp.15-21
    • /
    • 2004
  • Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace industries, building structures, ship materials, sporting goods and others. It is worth the while to use composite materials as various substitutions when compared with others. But the use is limited in the field of the mechanical processing because of its difficulties in processing. Thus, it is proved that the surface is rough in and out of the hole processing the GFRP with HSS drill in the vertical machining center.

유리섬유강화 플라스틱의 공구재질 및 형상에 따른 절삭특성에 관한 연구 (A Study on the Cutting Characteristics of Glass Fiber Reinforced Plastics by Tool Materials and Type)

  • 안상욱;노상래
    • 대한기계학회논문집A
    • /
    • 제20권4호
    • /
    • pp.1216-1224
    • /
    • 1996
  • In the use of glass fiber reinforced plastics it is often necessary to cutting the components, but the cutting GFRP is often made difficult by the delamination of composites and the short tool life. In this paper, the machinability of GFRP by mean of tool materials and type was experimentally investigated. By proper selection of cutting tool material and type excellent machining of this workpiece is achieved. The surface quality relate closely with the feed rate and cutting tools.

섬유강화 플라스틱 복합판의 구조와 분리.배향에 관한 연구 (A study on structure and separation orientation of fiber-reinforced thermoplastic sheet)

  • 이동기;조광현
    • 한국정밀공학회지
    • /
    • 제10권2호
    • /
    • pp.104-113
    • /
    • 1993
  • Characteristics of fiber-reinforced thermoplastic sheet depend on the quantity and shape of fibers. During a molding process of composites, the fiber-maxtrix separation and fober orientation are caused by the flow during the molding process. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation-orientation and molding conditions. The correlation between the separation and the orientation have to be clarified for designing the fiber structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scammer. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

  • PDF

해초 나노섬유가 황마섬유 강화 복합재료의 기계적 물성에 미치는 영향 (Investigation of the Effect of Seaweed Nanofibers in Jute Fiber-reinforced Composites as an Additive)

  • 김재철;이동우;송정일
    • Composites Research
    • /
    • 제31권6호
    • /
    • pp.398-403
    • /
    • 2018
  • 최근 플라스틱 폐기물로 인한 환경오염, 미세플라스틱의 생태계 교란 및 인체축적이 큰 문제로 떠오르고 있다. 이를 대체하기 위하여 친환경 수지 및 천연섬유 기반의 복합재료가 개발되어 왔으나 합성섬유 기반의 복합재료에 비하여 기계적 물성이 크게 떨어진다는 단점이 있다. 본 연구에서는 천연섬유인 황마섬유(jute fiber)의 기계적 물성을 향상시키기 위하여 해초로부터 친환경 나노섬유를 추출 후 첨가제로 사용하였다. 핸드 레이업 공정을 이용하여 복합재료를 제조하였으며, 인장, 굽힘, 낙추충격시험을 통하여 나노섬유가 천연섬유 복합재료의 기계적 물성 향상에 효과적임을 확인할 수 있었다.

양전자방출전산화단층촬영 검사에서 유방 질환 환자를 검사하기 위해 유리섬유강화플라스틱을 이용한 유방 틀의 제작 및 유용성 (In the examination of PET/CT, Breast-tool production and availability of using FRP to check for breast disease.)

  • 김갑중;전민철;한만석;서선열;김낙상;배원규
    • 한국융합학회논문지
    • /
    • 제8권9호
    • /
    • pp.175-181
    • /
    • 2017
  • 유방검사에서 영상의 진단 가치를 높일 수 있는 유방틀을 제작하여 유용성을 평가하고자 한다. 유리섬유강화플라스틱을 이용해서 유방틀을 제작하였다. 그리고 방사능계수율과 획득된 영상을 비교하였다. 유방틀의 평가에서 왼쪽과 오른쪽이 $1{\mu}Ci$ 당 counts가 각각 185 counts, 189 counts이다. 그리고 복와위 자세에서 획득된 영상은 원형에 가깝게 나타났다. 유방틀을 이용함으로써 진단 가치를 높일 수 있어 유방촬영 검사를 하는데 있어 유용할 것으로 사료된다.