• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2002

The influence of bus stops near signalized intersections is one of the important factors which cannot be negligible in the analysis of the capacity of signalized intersections. Absence of consideration of bus bay can reduce capacity and increase the time that the stop of buses block other traveling vehicles. This influence is reflected by the bus blockage adjustment factor in KHCM, but the factor does not consider the course of each bus passing the intersection. Particularly, left turn buses have more influence on the capacity than the other buses and require the minimum length of the road for lane changes. All the existing criteria can apply only to arterial roads on which mostly traffic flows are continuous. And the criteria. which can determine the optimum location and the minimum distance between a signalized intersection and a bus bay, is not prepared and the related study is insufficient. Therefore, a theoretical formula is derived in this study being based on the theories which are avaliable to apply to the situation of signalized intersections.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.935-943
• /
• 2020

This paper presents a methodology for evaluating suitability of a manned-unmanned aerial vehicle team for a complicated mission. The study identified vehicle performance, equipment performance and level of autonomy as the key factors that affect the mission effectiveness. A manned and an unmanned aircraft were compared, and their performance was quantized in these respects. SEAD was chosen as a representative manned-unmanned team mission. The SEAD mission was broken down to a sequence of tasks. Mission experts evaluated the importance of each mark item for the mission legs. Combining the results showed proper type of aircraft for each leg depending on the complexity, safety, and importance of the task. Finally, the whole mission plan was laid out as a time-based sequence which alleviate pilot workload significantly.

• Journal of Korea Water Resources Association
• /
• v.48 no.3
• /
• pp.159-167
• /
• 2015

Low-level outlets are necessary to empty reservoir storage in case of emergency such as abrupt storage level rise due to storm, dam body inspection as well as initial reservoir storage filling. However, the Korean standard for low-level outlet should be complemented. In this study, the HEC-ResSim model is utilized to simulate and calculate the capacity of the outlets and the days of release in order to evacuate reservoir storage safely. Three cases are analyzed according to its capacity. As a large dam with more than $1,000{\times}106m^3$ total capacity, Soyanggang Dam is selected and as a medium dam between $100{\times}106m^3$ and $1,000{\times}106m^3$ total capacity, Habcheon Dam is selected. Finally as a small dam with a total capacity less than $100{\times}106m^3$, Daegok Dam is selected. The size of low-level outlet and days of storage evacuation is estimated and the applicability of the analysis method is studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5993-5999
• /
• 2013

This study presents the information management item and the business process improvement plan managed all construction technique services of Design, Construction Supervision and Construction Management which is ordered and constracted by the public institution in the field of construction and business steps. In addition, it develped the Management System of Construction Technique Service Performances based on improved processes for the Public Agencies and Construction Service Director to register, review and approve the Service Performance Information. As a result, it would be help transparently managed Technical Engineer's work duplication status of Constuction Company, and checked online without having to submit Company performance data by providing objective and reliable information.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.129-133
• /
• 1987

To develop a microcomputer-based data acquisition system for measurement of variables such as temperature and weight in food process, a low-cost data acquisition system was developed using an Apple II microcomputer. The system consisted of a microcomputer, a temperature sensor made of pt-100, a strain gauge load cell for weighing, a preamplifier for signal conditionings and an interface device. Interface device was built with programmable interface chip MC 6821, tristate buffer 74244 and analog-to-digital converter ADC 0809. The analog signals of temperature and weight were serially acquisited upon the program. The BASIC language was used for operating the data acquisition and data handling programs. The system successfully measured the variables such as temperature and weight with various sampling intervals in food dehydration process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1630-1634
• /
• 2007

도시유역에서의 장기간에 대한 물순환 해석 기술은 도시하천의 복원 및 건천화 방지 사업의 점증적인 요구에 따라 필수적으로 확보하여야 하는 기술이지만, 관련 연구와 실무에서의 이해도는 미진하다. 따라서, 사업의 계획과 실무 설계를 위하여 도시유역의 물순환에 대한 이해와 기술을 지원할 수 있는 체계적인 지침이 필요하다. 외국의 사례를 살펴보면 일본의 경우 1995년 건설성의 주요 정책으로 "도시에서 적정한 물순환계 재생에의 노력"을 추진하였으며, "도시의 물순환 재생 구상 책정 매뉴얼"을 작성하여 사례 연구로 6개 유역을 대상으로 검토하였고, 2000년에는 "도시유역 물순환계의 정량화 방안"을 우수저류침투기술협회에서 주관하여 물순환계 재생구상 또는 물순환계 마스터플랜을 수립함에 있어서 필요로 하는 물순환계의 해석적인 평가방법의 해설서를 발간하였다. 호주의 경우는 1999년부터 WSUD(Water Sensitive Urban Design)란 개념을 도입하여, 정부 및 각 지방별로 프로그램을 진행하고 있으며, 지침서와 기술지도서를 작성하여 교육을 하고 실무에 활용하고 있고, 사례 연구와 학술회의를 통하여 기술 교류를 활발히 하고 있다. 자연적인 요소와 인공적인 요소가 복잡하게 조합되어있는 도시지역의 물순환의 상태를 파악하기 위해서는 유역의 자연특성과 사회특성 등에 관한 기초 자료의 수집이 선행되어야 하며, 다양한 관측결과를 기초로 물 순환계의 구조, 인과관계를 알기 위해, 또 물순환계 구성요소의 일부가 변화한 경우 다른 부분에 미치는 영향을 정량적으로 평가하기 위해서는 모델링이 필요하다. 또한 이 같은 해석 모형을 이용하여 여러 가지 물순환 개선 정책의 효과를 평가하고 그 결과를 시각적으로 나타내는 것이 가능하다면 정책의 입안에 관계하는 사람들에 있어 공통의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다.

• Journal of the military operations research society of Korea
• /
• v.33 no.2
• /
• pp.17-29
• /
• 2007

This work describes a basic process of OMS/MP in guided weapons on board ship. The OMS/MP which provided basic data of ROC & RAM analysis must be prepared by user But data acquisition Quantified by specific operational environment of ship and related preparing instructions which are not established are now insufficient of reliable weapon systems acquisition. The OMS/MP is an important area that become measures of Acceptance Test and doctrine considering future battlespace environment From a development of the OMS/MP template that describe systematically and as quantitative of shipped guided weapons, combat developer oriented product development & reliable weapon system acquisition are ta be accomplished. This research developed OMS/MP preparation templete that presented quantified OMS/MP derivation and RAM target value calculation process which provide optimum weapon systems design concept to research developers

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.198-204
• /
• 2010

The cover of truck agitator give in a part to prevent the lower flowing of fresh concrete when the concrete are transported from the ready mixed concrete plant to the construction field. As a result of the question data, it show up a dirty image to the general civil society. Due to the above image, it is predicted to affect the image of the construction company, so we did the site experiment of the flowing, the amounts of air, the temperature change of concrete with the concrete left in the site, to find out the usefulness. Also, for the comparing with this, we got the result by doing the inner experiment with the same condition. As the result of the experiment, the cover of truck agitator affect little to the reduction of slump. The change of the air amount, regardless of the existence of cover, was not effected much in proper level until 60minutes. In addition, The compression strength was proper to the goal design strength until 90minutes regardless of the cover of truck agitator exist or not exist.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.2
• /
• pp.97-105
• /
• 2015

Building information modeling (BIM)-based construction projects have increased and become more varied, and as such the management of BIM-based facility information is also increasingly important for facility maintenance. Information management, and specifically product data mapping, however, has some problems in the area of manual data entry and does not adequately consider the exchange requirements of facility maintenance. Therefore, it is necessary to introduce a method to improve the management of composite object information for BIM-based facility maintenance so that it can handle construction operation building information exchange (COBie) data for a composite object. Therefore, we present a method to map COBie data to related materials of a composite object. This research contributes to increasing the efficiency and accuracy of the required information mapping between a building model and product data using a BIM library through optimal BIM data adoption. Moreover, it allows for the creation and management of specific product data at the design development phase.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.447-451
• /
• 2007

A triplexer based on a silica planar lightwave circuit Mach-Zehnder nterferometer(MZI) is proposed and its characteristics are analyzed through simulations. To separate 1310 nm band and $1480{\sim}1560nm$ band properly, the path length difference of an MZI is set to be the multiple and half of the wavelength 1310 nm and the balance of the directional coupler is optimized in the $1480{\sim}1560nm$ band. The same MZI is additionally cascaded to provide good crosstalk characteristics. The 1490 nm band and 1550 nm band are further separated using additional two stage MZI's. A three-dimensional BPM and transfer matrix method analysis predicts the low crosstalk characteristics and the fabrication-error-tolerance of the proposed triplexer.