• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.25-37
• /
• 1996

To process computer graphics in real time, the high-speed operations(multiplier and adder) are needed to increase the speed of graphic process. RNS(Residue Number System) is integer number system that has the parallel and high-speed operation. Also, it is able to design both high-speed multiplier and adder, since a cyclic group has an isomorphic relation between multiplication and addition in RNS. So in this paper, DRNS(Double Residue Number System) is proposed, it is used for the multiplier and the adder, which are designed using a circulative code for the high-speed graphic processor in RNS. The designed multiplier would operate with the speed of 87Mzz two TTL using 74s09 and 74s32.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1275-1279
• /
• 2008

도시지역은 도시형 수해발생, 갈수시의 급수안전도 저하, 평시 하천유량의 감소, 공공수역의 수질악화, 지하수 오염 등 여러가지 문제에 직면하고 있다. 개발로 인한 수환경의 피해를 최소화하기 위한 대안적인 설계방안이 필요하며, 이를 위해서는 개발 전후 물순환 환경 변화에 대한 정량적인 해석이 가장 우선적으로 수행되어야 한다. 본 연구에서는 우리나라와 일본에서 도시유역에의 적용이 활발한 물리적 개념의 분포형 수문모형인 WEP(Water and Energy transfer Process) 모형을 통해 행정중심복합도시 개발 전후의 물순환 변화를 해석하였다. 정밀한 해석을 위해 대상유역을 100m 크기의 정방형 격자로 구분하고 기상 조건, 지표면 조건, 하천, 토양, 지하대수층, 농업용수 이용 등 물순환에 관련된 광범위한 입력자료는 기존 측정 자료 및 관련 문헌, 현장 조사를 통해 각각 구축하였다. 모의의 전 후처리는 WEP+를 통해 수행되었는데, WEP+는 WEP 모형의 방대한 양의 입력자료를 효과적으로 구축하고, 다양한 시계열 및 공간분포 출력자료를 효과적으로 분석할 수 있는 인터페이스를 지닌 전 후처리 프로그램이다. 개발로 인한 물순환 변화는 절성토로 인한 지형 및 토양 조건 변화, 토지이용 및 용수이용 변화에 대한 개발 계획을 모형 입력자료로 구축한 후, 개발전과 동일한 기상조건과 초기 모의조건 하에서 각각 11년간 모의하여 수문 요소 변화를 비교하는 방법을 사용하였다. 물순환 해석 결과는 개발 전후 모의에 대해 유황곡선 및 물수지, 수문요소 공간분포 비교를 통해 수행하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.58-65
• /
• 2021

In this study, as a method to increase the recycling of circulating fluidized bed combustion ash(CFBCA), CFBCA was utilized to produce autoclave aerated concrete product since CFBCA contains quicklime and calcium sulfate components that are required for the manufacture of autoclave aerated concrete. Successful achievement of such objective will bring cost reduction with high value addition, saving of natural resources, and the reduction of environmental load. Various mixing designs were designed to evaluate the properties of autoclave aerated concrete made of CFBCA. Based on series of experimental program, prototypes mix design for factory manufacturing was obtained. According to the experimental results, it was confirmed that gypsum can be replaced with CFBCA through the method of pre-treating the CFBCA as a slurry. It was possible to produce competitive autoclave aerated concrete products using CFBCA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.62-63
• /
• 2002

파장가변 색소 레이저 발진기는 반사형 회절격자에 비스듬히 입사하는 Grazing Incidence형 공진기 구조로 설계되었다.[1-2] 색소용액이 고속으로 순환되는 색소 셀에 여기광인 레이저 광원을 입사시키는 방법은 색소 셀과 색소 용액 순환방향 및 펌핑 광의 방향이 서로 수직을 이루도록 구성되어 있다. 또한, 두 개의 펌핑 광을 양방향에서 동시에 입사시킬 수 있도록 함으로써, 색소 셀 내부의 색소 용액이 여기 광을 균일하게 흡수하도록 설계하였다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.28-36
• /
• 1998

In order to establish the hydraulic design process of the torque converter, pump, turbine and stator were designed by reverse design method including one dimensional analysis, angular momentum distribution and forced vortex design. And the significance of evaluation of the circulation flow rate in torus of the torque converter was verified by numerical calculation if the combined blade rows of pump and turbine. It was confirmed that the computational method using interrow mixing model by Park and Cho was reliable to predict the flow-field and performance of the torque converter.

• 한국해양학회지
• /
• v.19 no.2
• /
• pp.133-140
• /
• 1984

Oceanographic applications of digital filters are studied with special emphasis on the convolution filter with Hamming window and the recursive filters. Convolution filters are simple to understand and easy to design but not efficient for a long data set. Recursive filters, despite of the complexities, have advantages on economy and filter characteristic. By means of digital filtering technique we find that the alongshore wind at Pusan and the sea surface temperature at Gampo in summers during 1973 to 1979 are negatively correlated at low frequencies (periods longer than 5 days) but not so at high frequencies.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.159-172
• /
• 2001

우리나라 전문대학은 1979년 설립당시에 비하여 괄목할 만한 양적 성장을 이루었으나 그에 비해 질적 성장과 위상의 정립은 아직 미흡한 설정이다. 산업사회에 맞추어 설계된 전문대학 교육제도는 지식기반사회에 맞는 인적자원개발 기능과 사명을 다할 수 있도록 재 설계되어야 한다. 따라서 획일화된 수업연한과 계속교 육체제의 미완성이라는 구조적 문제를 개혁해야만 하여야 할 시점이다. 수업연한은 다양한 전공과 사회의 수요에 맞추어 $2{\sim}3$년 범위안에서 다양하게 선택적으로 운영되어야 하고 단절된 학제를 연결시킬 수 있는 전공심화 과정이나 시니어보케이셔널칼리지(SVC) 제도를 도입하여 국민기본공통교육 10년 이후에 2+2(3)+2(1) +2 체제로 이어지는 순환형 직업교육체제를 구축하여야 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.1-9
• /
• 1983

In designing the adaptive recursive filter using the MRAS hyperstable output-error identifier, the most crucial point is the design of the error-smoothing filter In this paper, it is shown that by modifyins the HARF algorithm properly, we can obtain an algorithm which requires no error-smoothing filter and has relatively high convergence rate.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.241-250
• /
• 2013

As the amount of construction wastes increase, reuse of demolished concrete is being considered in research areas. Reflecting these interests, this experiment was performed to clarify concrete's mechanical property and workability using recycled aggregate as a coarse aggregate. Eleven cases of concrete specimens were produced by changing the rates of replacement of coarse recycled aggregate, replacement of fly ash, design strength, and moisture state of coarse aggregate. Compressive and tensile split strength tests were taken to study the mechanical properties of hardened concrete. To verify flowability of fresh concrete, a slump test and a flow curve test using ICAR Rheometer were performed. It was found that using recycled aggregate and fly ash leads good workability by testing slump and flow curve. The yield stress of fresh concrete decreased with increase of recycled aggregate substitution rate. Through the test, it was confirmed that there is inversely proportional relationship between the slump and yield stress roughly. Recycled aggregate concrete containing fly ash has considerably lower plasticity viscosity than not containing fly ash. Strength test results showed that recycled aggregate tended to decrease compressive and tensile strength of concrete, when recycled aggregate was used as a coarse aggregate. Using over 30% recycled aggregate caused significant decreases in compressive and tensile strength. Replacing 30% cement with fly ash was helpful to improve the long-term strength of concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.85-91
• /
• 2021

Aggregate waste separator with rotating separating net was designed for applying classification process of construction waste. In order to evaluate the performance of the aggregate waste separator, according to the type of waste, standardized waste samples are prepared using acrylic. The appropriate operating point was evaluated by the classification efficiency and misclassification rate of recycled aggregate according to the control frequency of the blower operating and inlet position of the separating net. The classification efficiency at the operating point of the aggregate waste separator was evaluated through flow analysis assuming recycled aggregate and waste sample as particles. As a result of the performance test, when the distance. between the conveyor belt and the inlet was 0.2m, the classification efficiency was 95%, but the misclassification rate of recycled aggregate was 2% or more, which satisfies the classification efficiency and the misclassification rate of less than 2%. The operating point was shown at a control frequency of 58Hz at a suction distance of 0.254m. As a resu lt of flow analysis, there was no misclassification of recycled aggregate. In order to redu ce constru ction waste in the existing recycled aggregate production process, adsorption system using a rotating separating net that can be operated as an installation type was built.