• Journal of KIISE
• /
• v.42 no.8
• /
• pp.1057-1064
• /
• 2015

The tactical network is system based on wireless networking technologies that ties together surveillance reconnaissance systems, precision strike systems and command and control systems. Several alternative paths exist in the network because it is connected as a grid to improve its survivability. In addition, the network topology changes frequently as forces and combatants change their network access points while conducting operations. However, most Internet routing standards have been designed for use in stable backbone networks. Therefore, tactical networks may exhibit a deterioration in performance when these standards are implemented. In this paper, we propose Priority based Multi-Path routing with Local Optimization(PMPLO) for a tactical backbone network. The PMPLO separately manages the global and local metrics. The global metric propagates to other routers through the use of a routing protocol, and it is used for a multi-path configuration that is guaranteed to be loop free. The local metric reflects the link utilization that is used to find an alternate path when congestion occurs, and it is managed internally only within each router. It also produces traffic that has a high priority privilege when choosing the optimal path. Finally, we conducted a simulation to verify that the PMPLO can effectively distribute the user traffic among available routers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.647-654
• /
• 2016

In the defense industry, national security takes priority over economic sense and this has translated into high cost and long-term research and development. However, the exponential growth of technology and rapid changes in the security situation in recent years have resulted in a call for the development of systems at a low cost within a short period of time. In order to implement a modularization strategy in the field of defense, the introduction of line replaceable units in OO systems needs to be prioritized. This study selects six criteria following a literature review and prioritizes 11 modules for OO systems using the project evaluation method, Grey Relational Analysis (GRA). Based on the GRA results, the grey relational grades were derived as 0.83, 0.81 and 0.80 for the M11 (Main board), M8 (EMI module), M3 (Single board computer) modules, respectively. The cost and time of development is expected to be reduced in accordance with the grey relational grade. The results of this research could be utilized for decision making on adopting modularization in similar system development or product improvement programs (PIPs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.120-125
• /
• 2016

For the purpose of protecting personal property and lives from incidents, accidents, and threats such as terrorism, video surveillance equipment has been installed and operates in many places. Video surveillance technology has gradually developed into high-quality, high-definition equipment, and a lot of products have been launched. However, closed circuit television (CCTV) equipment for security purposes can invade a person's privacy. In this paper, we propose a way to protect personal video images using meta-data in an intelligent Internet protocol (IP) camera. We designed the system to mask personal video information from meta-data, define the method of image-information access according to user privileges, and show how to utilize the meta-data during storage and recorded data searches. The suggested system complies with guidelines for CCTV installation and operation from Korea's Ministry of the Interior. Installed on only a single server so far, due to the limitations and technical difficulties of hardware performance, it has been difficult to find a method that can be applied to personal image information using real-time protection techniques. Applying the method proposed in this paper can satisfy the guidelines, reduce server costs, and reduce system complexity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.459-463
• /
• 2017

Hot dip galvanizing in the steel plant is one of the most widely used methods for preventing the corrosion of steel materials including structures, steel sheets, and materials for industrial facilities. While hot dip galvanizing has the advantage of stability and economic feasibility, it has difficulty in repairing equipment and maintaining the facilities due to high-temperature oxidation caused by Zn Fume where molten zinc used in the open spaces. Currently, SM45C (carbon steel plate for mechanical structure, KS standard) is used for the equipment. If a part of the equipment is resistant to high temperature and Zn fume, it is expected to improve equipment life and performance. In this study, the manufactured Ni alloy was tested for its corrosion resistance against Zn fume when it was used in the hot dip galvanizing equipment in the steel plant. Two kinds of materials currently used in the equipment, new Ni alloy and Inconel(typical corrosion-resistant Ni alloy), were selected as the reference groups. Two kinds of molten metal were used to confirm the corrosion of each alloy according to the molten metal. Zn fume was generated by bubbling Ar gas from molten Zn in a furnace($500{\sim}700^{\circ}C$) and the samples were analyzed after 30 days. After 30 days, the specimens were taken out, the oxide layer on the surface was confirmed with an optical microscope and SEM, and the corrosion was confirmed using a potentiodynamic polarization test. Corrosion depends on the type of molten metal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.396-402
• /
• 2016

Recently, as the performance of smart phones has advanced and their distribution has increased, various functions in existing devices are accumulated. In particular, functions in smart devices have matured through improvement of diverse sensors. Various applications with the development of smart phones get fleshed out. As a result, services from applications promoting physical activity in users have gotten attention from the public. However, these services are about diet alone, and because these have no exercise motion recognition capability to detect movement in the correct position, the user has difficulty obtaining the benefits of exercise. In this paper, we develop exercise motion-recognition software that can sense the user's motion using a sensor built into a smart phone. In addition, we implement a system to offer exercise with friends who are connected via web server. The exercise motion recognition utilizes a Kalman filter algorithm to correct the user's motion data, and compared to data that exist in sampling, determines whether the user moves in the correct position by using a DTW algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.9-12
• /
• 2016

The process parameters of DC pulsed sputtering to produce a multi-layer thin film with light reflectance at a specific wavelength region were studied. The optical simulation of multi-layer thin films of the silicon dioxide ($SiO_2$) films with a low refractive index and the titanium dioxide ($TiO_2$) films with a high refractive index was done. Under a DC pulsed sputtering power of 2kW and 200 sccm(standard cubic centimeter per minute) argon gas, the silicon dioxide films with a refractive index of 1.46 in the range of oxygen gas ratios of 12% and a titanium dioxide film with a refractive index of 2.27 in the range of oxygen gas ratios of 1% were produced. The multi-layer structure of high refractive index/low refractive index/high refractive index was designed and fabricated. The characteristics of the fabricated multi-layer thin film structure showed a reflectance of more than 45% in the range, 780 to 1200nm. This multi-layer structure is expected to be used to block the near infrared wavelength light.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.275-281
• /
• 2006

Simple-relay aided resource allocation (SRARA) schemes are incorporated with throughput guarantee scheduling (TGS) in IEEE 802.16 type time division duplex - orthogonal frequency division multiple access (TDD-OFDMA) downlink in order to enhance service coverage, where the amount of resources for relaying at each relay is limited due to either its available power which is much smaller than base station (BS) power or the overhead required for exchanging feedback information. The performance of SRARA schemes is evaluated with schedulers such as proportional fair (PF) and TGS at 64kbps and 128kbps user throughput requirements when total MS power is set to 500mW or 1 W. For 64kbps throughput requirement level, more improvement comes from relay than scheduler design. For 128kbps case, it comse from scheduler design than relay due to the fact that simple relay can't help using strictly limited amount of resources for relaying function.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.15-30
• /
• 2020

Recently, it is increasing a amount of installed solar-cell rapidly, and end-of-life photovoltaic(ELP) modules are generated in according to the reduction of cell efficiency largely. Recycling of ELP modules are begun at an advanced nation already, but there are bring about environmental contamination and resource recovery problems owing to not treated ELP modules because of economic cost completely. First of all, there were researched basic study for treatment conditions of used solar cell inspection, dismantling of aluminum frame, crushing / grinding & separation of tempered glass, removal of back sheet & EVA film, leaching & precipitation recovery of valuable metals and treatment of waste water. Therefore, we establish optimum conditions through carried out of designed apparatus, installation of equipment, test operation & trouble shooting in scale of 1ton/day pilot plant test. Following to economic review, it does have the economic efficiency until to the case of tempered glass recovery, but does not have the economic value in case of total processes until to recover the valuable metals. However, there are guaranteed economic value if we are gained a large amount of the expenses through EPR supported system. It was confirmed the commercialized possibility of ELP modules recycling if there were established on the collecting ELP modules, reusing criteria, economical technology, enactment of directives and enforcement of EPR supported system efficiently.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2008

Shear wave velocity($V_S$), which can be obtained using various seismic tests, has been emphasized as representative geotechnical dynamic characteristic mainly for seismic design and seismic performance evaluation in the engineering field. For the application of conventional geotechnical site investigation techniques to geotechnical earthquake engineering, standard penetration tests(SPT) and piezocone penetration tests(CPTu) together with a variety of borehole seismic tests were performed at many sites in Korea. Through statistical modeling of the in-situ testing data, in this study, the correlations between $V_S$ and geotechnical in-situ penetrating data such as blow counts(N value) from SPT and piezocone penetrating data such as tip resistance ($q_t$), sleevefriction($f_s$), and pore pressure ratio($B_q$) were deduced and were suggested as an empirical method to determine $V_S$. Despite the incompatible strain levels of the conventional geotechnical penetration tests and the borehole seismic tests, it is shown that the suggested correlations in this study are applicable to the preliminary estimation of $V_S$ for Korean soil layers.