• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.12-23
• /
• 2021

In this study, the combustion instability characteristics of low-swirl injector and high-swirl injector is compared by model gas turbine combustor. To compare of unstable behavior in high-swirl injector and low-swirl injector, we performed lots of measurement of combustion instability, with variable of equivalence ratio, combustor length and injector type. The results shown that longitudinal instability occur dominantly in model gas turbine combustor. In addition, it was found that high-swirl injector has more wide range of unstable regime than low-swirl injector. The blockage ratio what one of a parameter in low-swirl injector has not much effected in aspects of overall combustor behavior. Also, revealed that combustion instability occurred in the same combustor length has same properties, regardless of the injector type.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.497-503
• /
• 2018

Passenger ships and training ships have a common feature in that they serve many passengers. Thus, safe navigation is very important. During normal sailing, a ship may turn using various types of steering, including maneuvers to avoid collisions with dangerous target. When a ship turns, a heeling angle occurs. If trouble arises during sailing, a dangerous heeling angle may result or a capsizing accident. In this study, the heeling angle during turning was measured through experimentation with two training ships similar to passenger ships. These findings were compared with theoretical formulas for heeling angle when turning. We confirmed that the limit of the maximum heeling angle estimation using heeling angle formula when turning presented in IMO stability criteria. In addition, it was confirmed that the maximum estimated heeling angle can be reached by applying the result calculated in the theoretical formula 1.4 times when turning right and 1.1 times when turning left to reflect sailing speed when of rudder hard over. It is expected that this study will provide basis data for establishing safe operation standards for the prevention of dangerous heeling angles when turning.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.153-153
• /
• 2017

본 연구에서는 농작업지내 모서리 점을 이용하여 자율주행 트랙터의 경로점을 생성하는 알고리즘을 개발하였다. 작업지는 직사각형의 형태에서 거리가 긴 방향으로 직선주행 경로로 하고, 직선경로의 수는 작업폭에 의해 결정되며 홀수 또는 짝수 개일 수 있다. 또한 TM좌표계에서 직선주행 경로의 기울기는 양수 또는 음수 일 수 있으며, 선회시 전체적으로 좌회전 또는 우회전하는 경우로 구분하여, 즉 총 8가지의 경우에 대하여 조건이 주어지면 경로점을 구할 수 있도록 프로그램하였다. 선회를 위한 곡선경로 생성에는 트랙터의 최소 회전반경 데이터를 사용하였으며, 이때 새로 진입할 다음 경로가 충분히 떨어져 있는 경우에는 선회 구간에서도 직선 경로 구간이 생길 수 있음을 고려하였다. 한 주기의 경로점은 직선 경로 구간의 시작점과 끝점, 선회 구간의 시작점과 끝점, 다음 직선경로로 진입을 위해 선회하기 직전까지의 직선 구간에 대한 시작점과 끝점 등 6가지의 경우로 구분할 수 있다. 이때 어떤 끝점 경로점은 다음 조작 구간의 시작점 경로점이 되므로 최종적인 경로점 데이터는 4개가 된다. 여기서, 첫 번째 경로점 생성에서는 직선구간 진입을 위한 선회구간의 시작점과 끝점은 제외하였으며, 작업지로 진입할 수 있는 입구와 출구는 동일한 것으로 가정하여, 작업이 완료되는 지점에서 선회하여 다시 출발점으로 돌아올 수 있도록 추가 구성하였다. 실제 상황에서는 직선주행 경로의 수가 정수가 되지 않을 수 있으며, 이때는 작업 구간이 약간씩 오버랩되도록 작업폭을 조정하여 경로의 수가 항상 정수가 되도록 하였다. 알고리즘 평가에 사용된 작업 패턴은 관행적인 방법으로서 작업 포장을 반으로 나누어 8자형 패턴을 이용하였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.81-92
• /
• 2002

An automobile crash with a pedestrian generates a trajectory which is crucial to identify the cause of the crash. Previous researches have been carried out for pedestrian movement using simple explicit formulae. The formulae are derived from elementary physics. Therefore, they could not sufficiently include variables of a vehicle and a pedestrian. To overcome such a limitation, a simulation is utilized for the pedestrian behavior in crash environment. A dynamic software called MADYMO is utilized for the simulation. A simulation model is established. The automobile body and a dummy are modeled with rigid bodies, joints and springs. The simulation results are compared with those from explicit formulae. It is found that the explicit formulae did not fit to pedestrian conditions. Simulations are performed for various velocities of automobiles. Results are discussed for the usage of the simulation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.43-48
• /
• 2010

Proctor test A or D method of compaction is the most common laboratory test for investigation of subgrade soil characteristics, however, compression type using roller is used in the field. The differences between laboratory and field compaction have considerable error as application to subgrade soil properties of laboratory test. The investigation of compacted soil is carried into effect to solve the problem. The gyratory compactor which is made to reproduce the field density of asphalt mixture, coming from traffic loads, has an advance to compact it similar to arrangement of field aggregate particles. This gyratory compactor has several problems of investigation of compacted soil, because it has designed to make initial asphalt specimens. The main objectives of this research are grasping problems when compacted soil test using the gyratory compactor and showing solutions. It has made a comparative study of difference of the percentage of water content and weight, which are before and after compaction, about the pressure of compaction, frequency of compaction and speed of compaction. And it also has investigated finding maximum percentage of water content which not occur change of percentage of water content after compaction and searching how has an effect on drawing compaction curve.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.192-203
• /
• 1990

여러 가지 다른 형태의 노즐을 공기 선회식 버너와 공기의 선회가 없는 버너(CB-125 Burner)에 장치하여 공기 분사식으로 오일을 분사하여 연소로에서 연소시켰다. 연소로는 길이 3m에 약 1m 상(3) 의 연소공간을 가졌으며 상부에는 열전대를 장치하고 하부에는 물이 흐르는 관을 설치하여 열효율을 계산할 수 있게 설계하였다. 연소로 연돌부에는 CO 하(2), CO, O 하(2) 가스 분석기를 사용하여 과잉공기량과 고온계로 배기가스 온도를 측정하도록 하였다. 모든 측정치는 연소곡선과 효율곡선에 의하여 얻어진 상수를 이용하여 계산한 연소로 성능방정식에 의하여 평가하였다. 실험치에 의해 계산한 벽면 열손실량과 열전달 공식에 의해 산출한 열손실량을 비교 분석하여 측정치의 정확도를 추정하고 과잉공기의 효과도 검토하였다. 그 결과 본 연구에서 사용된 두 종류의 버너와 여러 형태의 노즐이 오일 연소시 열효율 면에서 큰 차이를 보이지 않고 있음을 알았다.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.119-131
• /
• 2011

The asbestos contents in some representative building materials were analyzed using JIS (Japanese Industrial Standard) X-ray diffraction (XRD) method. The changes in mineral composition during analysis process and problems in JIS method were also examined. XRD analysis of some representative domestic building materials used for roof, wall, ceiling, and floor indicates that slate have the highest asbestos content having 6.87~6.93% of chrysotile. Other building materials analyzed in this study also have 1.35~3.98% of chrysotile contents. The XRD analysis results of asbestos contents in some domestic building materials are presented in this study. This method is very effective for the asbestos content evaluation of building materials according to newly modified asbestos content regulation (Law of Industrial Safety and Health, 2007-26) that limits asbestos content less than 0.1% by Ministry of Employment and Labor. Small amount of tremolite as well as chrysotile were also observed in some samples. With consideration of crystal shape, contents and geological occurrence, it is considered that tremolite is an associated mineral of chrysotile and is not intentionally added. Complemental analyses with optical microscope and SEM/EDS are also necessary because XRD method cannot distinguish asbestiform from non-asbestiform. The XRD method applied in this study is very effective in the asbestos content analysis of building materials, specially building materials showing high asbestos concentration in residues due to the high loss rate with ashing and acid dissolution procedure.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.276-280
• /
• 2021

The oxygen transfer rate at the liquid surface of the reciprocally shaking vessel was studied. The required power of the reciprocally shaking vessel was not proportional to the shaking frequency, unlike the rotational shaking vessel, and the liquid level suddenly fluctuated greatly at a certain frequency as the flow pattern in the vessel was a left and right wave flow different from that of the rotational shaking that has a rotational flow. The effect of the shaking frequency on the required power in the reciprocally shaking vessel was very complex, such as less power required than the rotational shaking vessel when the shaking frequency is more than 3 s-1, but the required power for the range of the generated rotational flow in the reciprocally shaking vessel could be correlated with the equation that was reported for the rotational shaking vessel. The kLa (mass transfer capacity coefficient) in the reciprocally shaking vessel also increased in a complex pattern because the required power for shaking was not consumed in a simple pattern, unlike kLa in the rotational shaking vessel, which increases linearly with increasing frequency. The kLa of the reciprocally shaking vessel was larger than the kLa of the rotational shaking vessel, and as the kLa value increased, the difference between them increased sharply. As a result, the oxygen transfer rate in the reciprocal motion was greater than that of the rotational motion, and could be correlated with the required power per unit volume.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.16-22
• /
• 1987

직접분사식 디젤기관의 성능과 배기가스 문제에 여향을 주는 실린더 내에서의 연소형태는 크게 연료분사계와 흡입공기 유동계 두 가지에 의해 결정된다. 즉 분사율, 부사시기, 분무형태와 같은 분사계의 특성과 공기선회, 스퀴시(squish), 난류와 같은 공기 유동 특성에 의하여 연소형태가 결 정된다. 이러한 복잡한 연소형테를 기관 특성에 맞게 조정한다는 것은 대단히 어려운 문제인데 이것은 연료화 공기의 혼합이 연소실형상과 흡기계의 형상에 큰 영향을 받으며 연료가 액체 상 태로 연소실내로 들어와 분무과정을 통하여 증발이 되어야만 연소가 가능하기 때문이다. 특히 흡입공기 유동계에 있어서 현재의 직접 분사식 대젤기관의 흡입구 형상은 흡입공기의 운동에너 지에 모멘트를 가하여 연소실내에서 공기의 선희(swirl)를 발생시켜 줌으로써 연료와 공기의 혼 합기를 형성시키는 Helical type이 많이 이용되고 있다. 그러나 기관 성능과 배기가스 특히 NOx는 상반관계를 이루기 때문에 연소실내로 들어오는 흡입공기의 선희강도(swirl ratio)를 너무 강하게만 한다고 하여 좋은 결과를 얻을 수는 없다. 따라서 설계하고자 하는 각 기관에 있어서 요구되는 성능과 배기가스 문제를 만족하는 흡입공기의 선희강도가 얻어질 수 있도록 흡입구 형상을 설계한다는 것은 많은 연구와 경험이 요구되고 있다. 본 자료에서는 직접분사식 디젤기 관에 있어서 흡입공기의 최적 선희강도에 대한 설정방법과 흡입구 형상 설계를 위한 설계 이론 및 정상류 Rig test상에서의 흡입공기 선희강도의 평가방법을 소개하고자 한다.

• Korean Journal of Heritage: History & Science
• /
• v.26
• /
• pp.211-230
• /
• 1993