• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.19-24
• /
• 1987

본 문에서는 선회의 정도를 나타내는 선회도가 크고 작은 대표적인 두가지 경우에 대하여 시간평균 구조와 난류혼합 특성을 나타내는 시간변동치의 상관관계를 실험적으로 구한 예를 제시함으로써 선회운동에 의한 난류혼합특성을 설명하고자 한다.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.298-305
• /
• 2021

Identifying the effect of turning characteristics on collision avoidance for Maritime Autonomous Surface Ships (MASS) can provide a key to avoid the collision of MASS. The purpose of this study was to derive a method to identify the effect of turning characteristics, which can be changed by various rudder angles and the ship's speed, on collision avoidance. The turning circle was observed using a mathematical model of a 161-meter-long ship, and it was analyzed that the turning circle had an effect on collision avoidance through numerical simulations of collision avoidance for four collision situations of two ships. The evaluation results using the two variables, the minimum relative distance between two ships and the minimum time at the minimum relative distance, demonstrated that the rudder angle has a major influence on the change of the minimum relative distance, and the ship's speed has a major influence on the change of the minimum time. The evaluation method proposed in this study was expected to be applicable to collision avoidance as a measures in remote control of MASS.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.40-49
• /
• 2016

This study aims to confirm the characteristics of low swirl combustion at our low swirl model combustor. To do it, it is experimentally conducted by evaluating the flame shape, stability region and emissions according to the swirl angle. The most significant feature of low swirl combustion is a occurrence of lifted flame. Such lifted flames happen to combine exquisitely propagating feature of premixed flame with diverging flow. This feature of lifted flame was confirmed through a velocity flow field and visualized the flame in this model combustor. The visualized flame was classified according to the thermal power and equivalence ratio. The variation study in swirl angles showed that the lean flammable limit could be extended only by swirl angles. Also, as the swirl angle increased, it was confirmed that the NOx and CO emissions were decreased due to the mixing enhancement and shorter resident time.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.59-67
• /
• 2007

For the time being, HMA test specimen were prepared by Marshall Compaction Method for hot mix asphalt design and evaluated the mechanical properties of HMA at the specified air voids. Gyratory Compaction can simulate the field compaction process and measure the degree of compaction just after field compaction in laboratory. Superpave mix design with Gyratory compactor has been used for characterization of performance. The curve of gyratory compaction can be used to evaluate the permanent deformation potential of hot mix asphalt. In this paper, couple of indices for hot mix asphalt have been showed for hot mix asphalt in Korea. The major properties from gyratory compaction curve are compaction energy index and traffic compaction index. The specific guide line for the potential of hot mix asphalt has been proposed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.346-348
• /
• 2011

해상에서 예부선이 항행시 부선의 선회운동으로 인하여 예부선의 안전운항에 많은 어려움을 겪고 있다. 본 연구에서는 안전한 예항업무를 위하여 실무에서 많이 사용되고 있는 2가지 부선 모델을 대상으로 skeg의 설치 유무 및 skeg의 설치 위치에 의한 부선의 선회운동과 이에 따른 예인장력을 알아보기 위해 정수중에서의 수조실험을 실행하였다. 실험결과 예인삭의 선회각도는 skeg을 설치하지 않았을 때 가장 크게 나타났고, center skeg을 설치했을 때부터 작아지기 시작하여 side skeg을 설치했을 때 예인삭의 선회각도가 급격히 작아지는 것으로 파악되었으며, 이러한 특성은 선수형상에 따라 조금씩 다르게 나타나고 있음을 확인하였다. 또한 예인삭의 선회각도가 커질수록 예인장력이 커지는 것을 알 수 있었다. 따라서 부선에 skeg을 설치하여 운항하는 것이 부선의 선회 운동을 감소시켜 최종적으로 예인장력이 작아지게 하여 안전예항업무에 도움이 될 것으로 판단된다.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.137-144
• /
• 1997

Turbulent swirling cold-flow in a cyclonic gasifier has been analyzed by numerical analysis. Comparison of two dimensional and three dimensional analyses has shown that concept of equivalent slit is appropriate for the two dimensionalization of three dimensional phenomena. Flow characteristics have been scrutinized by varying swirl number which is a crucial parameter in determining the flow pattern of the cyclonic gasifier. Reactive flow field has been estimated by using theoretical swirl number and equivalent slit width for reactive flow. Results show that proper flow field for the reactive coal gasification can be formed by controlling the exit area and azimuthal location of coal burners.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.15-20
• /
• 2012

In order to investigate the maneuverability of tug-barge, sea trial tests such as speed, acceleration/deceleration, $10^{\circ}$ turning, $20^{\circ}$ turning, $10^{\circ}/10^{\circ}$ zigzag and $20^{\circ}/20^{\circ}$ zigzag were conducted with both tug and tug-barge. From the result of turning test, longer tactical diameter and lower rate of turn of tug-barge than those of tug are obtained. From the result of the zigzag test, bigger overshoot angle of tug-barge than that of tug is obtained. When they turned or changed a course, it showed that the barge turned inner side of the trajectory of tug. For the safe navigation, the helmsman of tug-barge should be aware of these maneuvering characteristics.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.40-42
• /
• 2011

예선이 부선을 선미 예인하는 상황에서의 예부선 조종특성을 확인하기 위하여, 예부선 통합 자유항주 모형시험을 수행하였다. 기존의 실선시운전에서는 관측하지 못한 부선의 불안정한 거동을 확인하였으며, 브라이들을 이용한 2점 예인 상태로, 우현 10도, 20도, 30도 선회시험을 수행하여 예선과 부선의 선회반경을 측정하였다. 시험수행조건이 다르나, 실선시운전 결과와 비교하여 선회반경이 약 3배 이상 커진 것을 확인할 수 있었다. 또한 부선의 선회궤적이 예선의 선회궤적 안쪽에 존재하는 것도 재확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.571-577
• /
• 2018

A gyratory compactor was developed to reflect the field compaction roller, which is commonly used in road construction. Unlike the compaction of the proctor using a conventional impact load, the gyratory compactor simulated the field roller compaction characteristics using the compressive force by the roller weight and the shear force through the rotation of a roller. The purpose of this study was to evaluate the shear stress and density change characteristics during compaction, which are difficult to obtain in the existing compaction process of the proctor, and to utilize it as a basic data for road design. The compaction characteristics of sand and subgrade soils were also analyzed and evaluated using the gyratory compactor. The compaction characteristics obtained using the gyratory compaction are basically the number of gyrations, height of the specimen, compaction density, void ratio, degree of saturation, and shear stress. As the number of gyrations increased, the height of the specimen decreased, the compaction density increased, the void ratio decreased, the degree of saturation increased, and the shear stress tended to increase. The shear stress of the compacted specimens started at 200 kPa in the initial stage of compaction and increased to approximately 330 to 350 kPa at 50 gyrations. The compaction density, degree of saturation and shear stress tended to increase with increasing water content in the same specimens. Compaction using turning compaction has the advantage of measuring the physical properties required for road design, such as density and shear stress, so that more engineering road design will be possible if it is reflected in road design.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.81-92
• /
• 2002

An automobile crash with a pedestrian generates a trajectory which is crucial to identify the cause of the crash. Previous researches have been carried out for pedestrian movement using simple explicit formulae. The formulae are derived from elementary physics. Therefore, they could not sufficiently include variables of a vehicle and a pedestrian. To overcome such a limitation, a simulation is utilized for the pedestrian behavior in crash environment. A dynamic software called MADYMO is utilized for the simulation. A simulation model is established. The automobile body and a dummy are modeled with rigid bodies, joints and springs. The simulation results are compared with those from explicit formulae. It is found that the explicit formulae did not fit to pedestrian conditions. Simulations are performed for various velocities of automobiles. Results are discussed for the usage of the simulation.