• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2000

A panel method based on the raised panel approach is developed for the nonlinear ship wave problem of practical hull forms. For the validation of the present numerical scheme. the developed method is first applied to Series 60 hull for which the extensive experimental data are available. As practical applications. the developed method is applied to KRISO 3600 TEU container ship and KRISO 300K VLCC. With the primary emphasis on the nonlinear effects of the global wave pattern generated by the two commercial ships. the calculated wave patterns are compared and verified with the experiments of KRISO. It is found that the calculated results of the present method are quite satisfactory compared with the linear methods like Dawson's approach and Neumann-Kelvin solution.

• Communications of Mathematical Education
• /
• v.27 no.2
• /
• pp.121-134
• /
• 2013

Linear Algebra are arguably the most popular math subjects in colleges. We believe that students' learning and understanding of linear algebra can be improved substantially if we incorporate the latest advanced information technologies in our teaching. We found that the open source mathematics program 'Sage' (http://sagemath.org) can be a good candidate to achieve our goal of improving students' interest and learning of linear algebra. In particular, we developed a simple mobile content which is available for Sage commands on common cell phones in 2009. In this paper, we introduce the mobile Sage which contains many Sage functions on a smart-phone and the mobile linear algebra content model(lecture notes, and video lectures, problem solving, and CAS tools) and it will be useful to students for self-directed learning in college mathematics education.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.89-99
• /
• 1990

It is required to develop a hull form with low resistance and high propulsive efficiency for the improvement of the ship-board operational economy. Since the hull forms with low resistance frequently have lower propulsive efficiency and on the other hand the hull forms with higher propulsive efficiency don't show good resistance characteristics, it is always very difficult to obtain economical hull forms which require less propulsive power accordingly. Efforts have been made to pursue a stern form with excellent resistance and propulsion characteristics together by shaping the run of the so-called buttock-flow type stern, which is known to have good viscous resistance performance, like that of conventional aftbody(U-type or Hogner type) featured by high propulsive efficiency. First model tests confirmed that the above concept can be one of the alternative approaches to the design of the good stern form and by the continuing efforts thereafter for the refining of the concept, propelled by the first promising results, stern form of good resistance performance together with good propulsive efficiency has been realized to some extent. In addition, it is confirmed that the new new stern can have better cavitation and vibration characteristics due to uniform wake-fields and the compact engine room arrangement can be possible due to it's larger floor area in way of engine room double bottom as compared with usual barge stern.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.316-322
• /
• 2017

The primary objective of the current study is to develop outstanding hull form on resistance performance by using numerical analysis code. Model tests were conducted to assess the resistance performance of the developed hull form. The investigation of an existing vessel was performed for validating the actual ship design based on the drawing. The operating displacement and speed were mainly confirmed through investigation of the existing vessel. The resistance performance of the existing vessel was analyzed using numerical code. The developed vessel was derived through studies on wave improvement of the bow shoulder, the balance of displacement distribution, the modification of the frame shape, and the size and shape change of the center skeg. Based on the results of a computational fluid dynamics analysis, the resistance performance of the developed vessel showed an improvement of 15% over the existing vessel at a speed of 11 knots. Resistance tests were conducted to evaluate the performance of the existing vessel and the developed vessel in the towing tank. Finally, the effective horsepower of the developed vessel showed an improvement of 17% over the existing vessel.

• Journal of Korea Ship Safrty Technology Authority
• /
• no.7 s.25
• /
• pp.47-63
• /
• 2008

저항성능 측면에서 한국 어선선형의 특성을 파악하기 위하여, 본 연구에서는 한국과 일본에서 건조되어진 대표적인 어선을 한 척씩 선정하여 두 어선의 선형적 특성을 비교하였다. 또한 한국 어선의 선형적 특성들, 즉 일부 대표적인 선형요소들과 이를 제외한 기타의 국부적 선형특성들을 일본어선의 선형을 참고로 보정함으로써 우리나라 어선들의 저항성능을 향상시킬 수 있는 방안에 대하여 연구하였다. 한국어선과 일본어선은 해양환경과 어업의 종류가 다를 뿐만 아니라 관습적인 이유 등으로 선형의 차이가 있게 되며, 이것은 한국 어선이 일본 어선에 비하여 같은 배수량을 가지더라도 배 길이가 짧은 반면 폭이 넓으며 흘수가 얕은 대표적인 선형요소들의 차이로 확인할 수 있다. 이러한 차이를 고려하여, 일본어선들에 대한 유효마력 추정프로그램을 한국어선들에 맞게 보정.개발하는 과정을 통하여 양국 어선의 저항성능 차이를 확인할 수 있었으며, 보정된 프로그램을 이용하여 연구대상의 한국어선에 대한 저항저감효과를 줄 수 있는 선형요소들을 도출함으로써 선형요소들의 변화에 따른 저항성능 효과를 확인할 수 있었다. 그러나 선형요소들의 보정에도 불구하고 한국어선의 저항성능은 여전히 일본어선의 그것보다 떨어짐을 확인하여, 본 연구에서는 대표적인 선형요소들뿐만 아니라 국부적 선형특성 즉, 선수부에서 차인선(chine line) 경사도, 용골의 형상, 선미길이(용골 끝에서 선미단까지의 거리)를 각각 보정해 봄으로써 보다 더 큰 저항성능의 개선효과를 확인하였다. 본 연구결과는 앞으로 저항성능이 우수하면서도 실용 가능한 개량된 한국 어선선형의 개발에 기초적인 자료로서 활용이 가능할 것으로 사료된다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.639-642
• /
• 2011

이 연구에서는 완전 조립식 교량 하부구조의 비선형해석을 위한 전산플랫폼을 개발하였다. 완전 조립식 교량 하부구조의 비선형거동을 정확하게 파악하고 합리적이면서 경제적인 설계기준의 개발을 위한 자료를 제공하는데 그 목적이 있다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트 속에 있는 철근모델을 조합하여 고려하였다. 사용된 부착 또는 비부착 텐던요소는 유한요소법에 근거하며 프리스트레스트 콘크리트 부재의 콘크리트와 텐던의 상호작용을 구현할 수 있다. 그리고 접합면요소는 세그먼트 접합부의 비탄성거동을 예측할 수 있다. 제안된 해석기법은 수치예제에 대하여 비선형거동을 비교적 정확하게 예측하였다.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.157-165
• /
• 2007

In this research, a vertical alignment analysis algorithm was developed. The developed algorithm used acquired data from a vehicle with multiple sensors such as a global positioning system (GPS) an inertial navigation system (INS), and a distance measuring unit (DMI) to collect information about vehicle position and altitude. The vertical alignment analysis algorithm includes the identification of vertical tangent sections, the beginning and ending points of vertical curves, and the calculation of length of vortical curves. Also, the algorithm can help build models for vertical tangent sections and vertical curve sections. In order to verify the algorithm, a field survey was conducted at an actual highway section and the result of the field survey was compared to a highway CAD drawing.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.79-89
• /
• 1995

Two-element plate concept is incorporated into the buckling problem in order to simplify the nonlinear distribution of stress through the thickness of plate. Finite element formulations and programs based upon the Reissner functional and the modified Reissner functional using two-element plate concept are developed for buckling analysis of plates under axial compression. The two programs have been applied to obtain the linear elastic buckling behavior of axially compressed flat plates. Excellent agreement of linear elastic-solution results with exact or approximate solutions of other authors for the same boundary conditions proves the validity of the finite element method using two-element plate theory.

• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.306-314
• /
• 2007

This paper is to develop a model for evaluation of highway alignment design considering the driver's behavior in order to enhance the highway safety. Under the conditions, this research included a new evaluation criteria development and an analysis on how to change evaluation criteria according to roadway alignments, to evaluate safety. The vehicle spacing and speed deviation are suggested as new evaluation index The evaluation criteria model can be used to compare the anticipated safety performance of two or more geometric alternatives for a proposed highway improvement.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.21-40
• /
• 2003

A traffic accident analysis method was developed and tested based on the highway alignment risk indices using geographic information systems(GIS). Impacts of the highway alignment on traffic accidents have been identified by examining accidents occurred on different alignment conditions and by investigating traffic accident risk indices(TARI). Evaluative criteria are suggested using geometric design elements as an independent variable. Traffic accident rates were forecasted more realistically and objectively by considering the interaction between highway alignment factors and the design consistency. And traffic accident risk indices and risk ratings were suggested based on model estimation results and accident data. Finally, forecasting traffic accident rates, evaluating the level of risk and then visualizing information graphically were combined into one system called risk assessment system by means of GIS. This risk assessment system is expected to play a major role in designing four-lane highways and developing remedies for highway sections susceptible to traffic accidents.