• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.340-342
• /
• 2011

묘박 중인 선박은 주묘를 예방하기 위해서는 파주력을 크게 유지해야 하는데, 대부분의 파주력은 앵커에 의해 형성된다. 앵커의 파주력은 앵커의 형태와 수중무게 그리고 해저 저질에 따른 파주계수에 따라 달라진다. AC-14형 앵커는 ASS형 앵커에 비하여 2~2.5배의 파주력을 형성하는 것으로 알려져 있다. 그러나 이러한 파주계수는 모형실험 등을 통하여 정해진 것으로 실제 상황에서 그 유효성을 분석한 연구는 거의 없다. 따라서 본 논문에서는 AC-14형 및 ASS형 앵커의 파주계수를 실제 선박에서의 주묘 사례를 분석하여, 현재 사용되고 있는 파주계수의 유효성을 확인하였다.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.683-688
• /
• 2014

The vessel should prevent dragging anchor against the external forces by utilizing the anchor and secure the stability of it. A fundamental understanding on the embedding motion and holding power of the anchor is necessary to perform the safe operating of anchor work. In this study, the embedding motion and holding power of the anchor according to an initial position in an experimental tank of 6m long in sand are tested by using two types of different anchor models(ASS and AC-14), which are generally applied to the commercial vessel nowadays. The anchor flukes seem to rotate and to be embedded into soil up to the maximum depth and maintaining a constant depth in case of the same direction and perpendicular to the towing direction, regardless of the form of an anchor. In case of the opposite direction to the towing direction, it is noted that the coefficient of holding power becomes smaller than the other initial positions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.2
• /
• pp.97-104
• /
• 1991

Generally, the coefficients of common holding power of an anchor and a chain cable have been reported too higher in their values in the safety of the shiphandling. The model experiment was carried out to find the most suitable coefficients of holding power of the Hall's type anchor and the chain cable in various kinds of seabed. The results obtained are summarized as follows; 1) The coefficients of holding power of the anchor and the chain cable were 4.05, 0.75 in the mud, 3.95, 0.66 in the sand and 3.61, 0.72 in the pebbles respectively. 2) The experimental coefficients of holding power of the anchor and the chain cable were 0.4~0.6 times the values of the coefficients of common holding power. They were almost same as the values of the coefficients of safe holding power in the mud and the sand, but in case of the pebbles, they were 1.4~1.8 times the values of the coefficients of safe holding power. 3) It is considered useful for the safety of the shiphandling to draw curves of the holding power with maximum limits holding power at the various wind forces and the coefficients of holding power.

• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.613-618
• /
• 2011

Vessels on anchoring are sometimes dragged due to the increased external forces. For preventing the dragging, it is required to enhance the holding power of the anchor. The holding power depends on the type and weight of the anchor and the seabed condition. Especially, the holding power of AC-14 type anchor is known to be 2~2.5 times bigger than that of ASS type anchor. However, these coefficients was determined nearly by the result of the model test, so there is a need to verify that by sea trial. Therefore actual dragging case was analyzed and then compared with the coefficients in use, it was found that the two of them are much alike.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.1-3
• /
• 2019

최근 선박의 대형화, 태풍 및 돌풍 등 급격한 자연환경의 변화, 한정된 정박지의 과밀 등으로 VTS 해역에서 선박 주묘가 자주 발생하고 있다. 선박의 주묘를 예측하기 위해서는 기상 조건에 의한 외력과 선박의 묘, 묘쇄 등 대항력의 정확한 비교, 현수부 및 파주부를 고려한 주묘 발생 가능 시점 예측 등의 노력이 요구된다. 본 연구에서는 VTS 관제 구역에서의 주묘 사고 사례 분석을 통하여 주묘 위험성 판단 프로그램을 검증하고, 관제 시스템에서 활용을 위한 시스템 개선 방안을 제안하고자 한다. 향후 관제 시스템의 주묘 위험성 판단 기능 도입을 통하여 주묘 사고의 예방 및 조기 대응이 가능할 것으로 기대한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.646-653
• /
• 2018

Marine accidents caused by dragging anchors occur constantly due to enlargement of ships' size and unusual weather conditions. Nevertheless, vessel operators rely on their experience because the calculations of actual holding power and external forces are complex and inconvenient. The purpose of this study was to propose a program for the anchor dragging risk assessment in order to provide crew and VTSO with the information to determine easily the danger of dragging and take appropriate action. The input data in this program were composed of the ship's basic particulars, anchoring condition, and external environment etc. on calculating for the wind pressure, frictional force, drift force, and holding power. Three dragging anchor accidents were applied to the program's data input at the time of the day, then the result was assessed by 'warning', which was verified with a high confidence. As a result, the risk of dragging anchors can be predicted in advance through this program. In further studies, it is necessary to simplify the input data and improve user convenience through automatic input from various equipment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.165-171
• /
• 2005

When typhoon approaches, ship normally drops her anchor at proper anchorage for sheltering. If an anchoring ship is under the influence of typhoon, she can keep her position when the external force and counter force is balanced. Where, external force is induced by wind, wave and tidal currents while counter force is induced by holding power of anchor/chain and thrust force of main engine. In this study, authors presented a method to analyze theoretically the limit of external force for the ship to keep her position without being dragged and, to check the validity of method, applied this to the ship which had been anchored in Jinhae Bay when the typhoon MAEMI passed on September 2003.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.357-363
• /
• 2005

When typhoon approaches, ship normally drops her anchor at proper anchorage for sheltering. If an anchored ship is under the influence of typhoon, she can keep her position when the external force and counter force is balanced. Where, external force is induced by wind, wave and tidal currents while counter force is induced by holding power of anchor/chain and thrust force of main engine. In this study, authors presented a method to analyze theoretically the limit of external force for the ship to keep her position without being dragged and, to check the validity of the method, applied this to the ship which had been anchored in Jinhae Bay when the typhoon MAEMI passed on September 2003.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2014

This study suggests the minimum critical external forces based on the assessment of anchoring safety to single anchor situation for representative 8 number of ships in E-group anchorage of Ulsan port. Assessment of anchoring safety is compared holding powers of anchor with external forces of wind, wave and current. Holding powers was reflected materials of seabed, equipment numbers regarding anchor and chain weight, also external forces acting on a hull was calculated considering projected wind area and wetted surface area to the full and ballast conditions respectively. The results of anchoring safety assessments to single anchor showed that the minimum criteria of dragging anchor is a little different from ship's type, size and loading conditions. Bulk carrier can be dragged over the 15m/s of winds and Tanker can be dragged over the 13m/s of winds in case of less than 2knots of currents speed.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2015

Recently, Due to variable marine accident occurred, problems relating to marine accidents have been raised. Of these accidents, designated anchorage of Korea coastal port, spcially open-sea anchorage, occurred dragging anchor and accidents are likely, due to failure to obtain a valid ship's holding power so that it is the situation unsatisfactory that ensuring the safety of the anchored ship and anchorage systematic safety management stadars for the efficent operation of the anchorage. also in case of open-sea anchorage vulnerable to external force of certain conditions due to geographical location and topographical characteristics of the port, accidents are likely dragging anchor by typoon or suddenly strong wind and secondary accidents are concerned. This paper shows standard of limit external force to ensure the safety anchorage each of ship's size through review marine accidents on Pohang port, also it is determined to be used as a basic reference for anchoring safety and efficient anchorage management.