• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.407-414
• /
• 2010

The fairway within the area of Yul-do and Songdo located near the Myeongnyang-sudo approaches south of Mokpo harbor is well guided by traffic separation scheme and other navigational aids. However, that part of the waterways where Yul-do is located sits at the cross-roads of marine traffic and is subjected to some potential risks in the voyage navigation: the effect of climatic phenomenon, the disregard of most ships in using the western sector of the fairway creating a congestion in the eastern sector, and lastly, the disadvantageous erect of the location and height of Yul-do island that hinders good lookout. This study investigates the environmental conditions that prevailed in the area in the span of 5-year period and the marine traffic situation taken from the data within the 72-hour period The navigational hazards and marine casualties are also be presented. The results are analyzed and are made the basis of a proposal for an improved separation of traffic. Thereafter, an evaluation is carried out by using the components of marine traffic flow simulation and ES modeling index. It is evaluated through simulation by the use of full-mission ship handling simulator.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.208-216
• /
• 2023

In this study, using the Delphi method, 20 responses to 4 questions (need for launch safety control, top-priority considerations for ensuring public safety during launch, necessary improvements for securing maritime safety, and maritime safety threat factors) regarding launch vehicles and public safety were obtained from experts, and their importance was evaluated to analyze the factors that threaten the reinforcement of maritime safety around launch sites and flight paths when launching. According to the results of an analytic hierarchy process (AHP) analysis, the consistency ratio of the four questions was 4.8%, which is lower than CR ≤ 0.1(10%), and the consistency percentage of the lower measurement indicators was 3.9~5.7%. The derived importance and priority of maritime safety threat factors during launching were in the following order: Substantial human and physical damage in case of launch accidents(0.36), Prepare legal bases (e.g., penalty details) regarding maritime control(0.32), Secure the safety of personnel, equipment, and facilities in danger zone(0.31), Unauthorized entry of vessels in maritime control zones and non-compliance to restrictions(0.30). This article can serve as a reference for strengthening maritime safety in areas around launch sites and flight paths.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.75-94
• /
• 2011

This paper is concerned about applying the AHP(Analytic Hierarchy Process) for a priority analysis of equipment operation plan to improve productivity of the container terminal in Gwangyang port. In this study, main elements of container terminal are assumed as into yard equipment area, transport equipment area, berth equipment area and C/Center area. A questionnaire is used to collect the opinions of equipment operating department and operational planning department. On the whole, the result of the analyses reveals that the most important area is yard equipment area. Examining each department is responses, equipment operating department preferred the C/Center area to other areas, on the other hand, operational planning department preferred yard equipment area. The result of this study suggests some guidelines for deciding priority of operation plan in the container terminal.

• Journal of Environmental Policy
• /
• v.5 no.4
• /
• pp.1-18
• /
• 2006

Recently, the damage by fresh flood increases in Gangwon-do and Gyeongsangbuk-do of the north-eastern area of Korea. Even though the recent pattern of rain fall keeps changing, there is no strategy to mitigate damage by disaster. For the appropriate measure and policy for decreasing damage, an index for vulnerability is necessary to provide evidence of local climate change. The present work analyzes the flooding damage cost during the past 20 years. During 80's, the southern area of Korea was seriously damaged by over-floods on the agricultural ground. After that time, the loss and damage has decreased in the southern area but the middle part has shown slight but distinct increases of damage. The absolute coast of damage in the northern part has kept constant. However, the relative regional damage to the total country damage has kept increasing over 20 years in the same area. The surface area of floods is strongly correlated with the regional damage cost in the southern part but the north-eastern part has weak correlation between flooded area and cost. It implies that the recent damage in the north-eastern mountain area was not caused by flood itself but the other factors such as avalanches. The present work expects that the damage cost can be a good proxy value for index for climate change impact assessment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.33-40
• /
• 2005

According to the development of technology of the navigational equipments, many bridge equipments have been improved, however, marine accidents by human error have not been reduced. Therefore, a matter of primary concern is focused on whether bridge equipments of ships are ergonomically arranged to reduce errors due to human factors. As part of a design of IBS(Integrated Bridge System) standard, rules of the conning display to save time and additional movements to obtain important informations of a ship should be established as soon as possible. In the present study, ergonomic design factors for the conning display are studied through the survey of related works, heuristic evaluations, sketch method tests as well as questionnaires. Using these factors, new conning display was designed and the ergonomic indices were evaluated by comparing tests of the existing conning displays. It is found that the designed conning display obtained high ergonomic index showed better performance, therefore, the ergonomic index studied in the present paper can be used as a useful design standard in the conning display design procedures.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.55-63
• /
• 2021

In this study, a numerical methodology is proposed for evaluating valve flow noise in a pipe conveying high pressure gas, and the effects of perforated plates on reduction of such valve flow noise are quantitatively analyzed. First, high-accurate unsteady compressible Large Eddy Simulation techniques are utilized to predict flow and flow noise by a valve in a high-pressure pipe. The validity of the numerical result is confirmed by comparing the predicted wall pressure spectrum with the measured one. Next, the acoustic power of downstream-propagating acoustic waves due to the valve flow is analyzed using an acoustic power formula for acoustic waves propagating on mean flow in a pipe. Based on the analysis results, perforated plates are designed and installed downstream of the valve to suppress the valve flow noise and the acoustic power of downstream-going acoustic waves is predicted by using the same numerical procedure. The reduction by 9.5 dB is confirmed by comparing the predicted result with that of the existing system. Based on these results, the current numerical methodology is expected to be used to reduce valve flow noise in an existing system as well as in a design stage.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.272-281
• /
• 2007

선박제조업을 비롯한 운송업 및 건축업 등의 다양한 분야에서 용접기술이 이용되어 옴에 따라 용접근로자들에 대한 산업보건학적 관심이 높아지고 있다. 노출정도가 다양하기는 하지만 용접흄은 6가 크롬을 비롯한 금속화합물과 유해가스, 화학물질 등을 복합적으로 포함하고 있는 스테인레스 스틸 용접흄에 대한 유전독성영향을 평가하기 위하여 흡입챔버를 이용, 실험동물인 영장류에 스테인레스 스틸 용접흄을 노출시키고 혈액 내 lymphocytes에 생성된 용접흄 노출농도 및 시간별 DNA 손상정도 및 그 회복효소를 측정함으로써, 유해성이 완전하게 확인되지 않은 용접흄에 노출되어 나타날 수 있는 암을 비롯한 심각한 건강영향을 예방하기 위한 각 지표들을 찾아 그 유용성을 비교하고자 하였다. 영장류를 노출시키기 위해 robotic arm을 장치한 영장류 흡입노출 시스템을 개발하였으며, 이 노출 시스템을 이용하여 수컷 영장류 6마리에 대해 용접흄 노출시험을 실시하였는데 실험군은 대조군 2, 저농도 ($31mg/m^3$) 노출군 2, 고농도 ($63mg/m^3$) 노출군 2마리로 구성하였고, 1일 2시간씩 일주일에 5일 동안 용접흄에 노출시켰다. 노출 농도는 지속적으로 모니터링 하였고, 노출과정 중에 영장류의 혈액을 채취하여 lymphocytes를 분리, 단세포 DNA 손상을 선별하기 위해 DNA 손상회복 효소인 E. coli formamidopyrimidine-DNA glycosylase (Fpg)와 endonuclease Ⅲ (Thymine Glycol-DNA glycosylase) 투여와 Comet asaay (single cell gel electrophoresis, 단세포겔전기영동기법)를 결합시켜 이용하는 Fpg/Endo III FLARE 분석법을 사용하였다. Fpg enzyme에 의한 olive tail moment값의 변화는 16주 노출군부터 노출부검(34주)군 까지 노출농도가 높아짐에 따른 olive tail moment 기하평균 값의 양 반응관계를 보기는 어렵지만, 고농도군의 경우 27주 노출군에서 가장 높은 olive tail moment 값을 보이고 이후 차츰 감소하였다. 한편 16주에서 22주까지의 노출기간에서는 대조군에 비해 노출군에서 DNA손상정도(olive tail moment값)는 모두 유의하게 높았으나, 6, 12, 18, 25, 31, 33, 35주간 노출하였을 때는 다른 결과를 보였다. 각 실험군의 Fpg enzyme에 의한 tail length값의 분포를 살펴볼 때, 저농도군 및 고농도군에서 27주간 노출하였을 때 가장 높은 tail length 값을 보이고 이후 차츰 감소하는 경향을 보였다. 또한 16, 22주간 노출하였을 때 대조군에 비해 노출군에서 tail length 값이 유의하게 높았으나, 20주간에서만 양 반응관계가 관찰되었고, 다른 주간에서는 양 반응 및 기간 반응관계를 나타내지는 않았다. Endo III enzyme에 의한 olive tail moment값의 변화는 기간별 노출군에서 대조군에 비해 높은 DNA손상정도(olive tail moment값)를 나타내는 결과들이 있었지만, 10, 12, 16, 22, 25, 31주간 노출하였을 때 등 상당수 노출기간에서 반응관계를 나타내지는 않았다. 각 실험군의 Endo III enzyme에 의한 tail length값의 분포를 살펴볼 때, 18, 20, 27, 33주간 노출하였을 때 대조군에 비해 노출군에서 tail length 값이 조금 높았지만, 양 반응 및 기간 반응관계를 보이지 않았고 수치의 크기가 불규칙하게 변화하였다. 즉, DNA에 있어 산화된 pyrimidine을 형성하여 손상된 부위의 염기를 제거함으로써 AP site (abasic site)를 만들고 이들이 Comet assay를 통해 break로 전환된 것을 포함한 DNA손상을 측정하기 위하여 endonuclease III (Endo III)를 첨가시킨 Endo III FLARE 분석법을 실시한 결과, 본 연구에서 나타난 결과는 용접흄 노출 영장류에서 Olive tail moment 및 tail length 공히 노출량 및 노출기간 반응관계를 볼 수 없었다. Endo III FLARE 분석법을 통한 산화적 DNA 손상지표는 영장류에 적용하기에는 적응반응현상으로 대조군과 유의한 차이도 관찰할 수 없었고 더욱이 역으로 대조군에서의 자연발생적 수치가 더 높아질 수 있어 용접흄 노출 영장류의 모니터링 지표로 사용하기에는 제한점이 있었다.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.361-373
• /
• 1999

Objectives: Receive Operating Characteristic(ROC) curve with the area under the ROC curve(AUC) is one of the most popular indicator to evaluate the criterion validity of the measurement tool. This study was conducted to develop a standardized questionnaire to discriminate workers at high-risk of work-related musculoskeletal disorders using ROC analysis. Methods: The diagnostic results determined by rehabilitation medicine specialists in 370 persons(89 shipyard CAD workers, 113 telephone directory assistant operators, 79 women with occupation, and 89 housewives) were compared with participant's own replies to 'the questionnair on the worker's subjective physical symptoms'(Kwon, 1996). The AUC's from four models with different methods in item selection and weighting were compared with each other. These 4 models were applied to 225 persons, working in an assembly line of motor vehicle, for the purpose of AUC reliability test. Results: In a weighted model with 11 items, the AUC was 0.8155 in the primary study population, and 0.8026 in the secondary study population(p=0.3780). It was superior in the aspects of discriminability, reliability and convenience. A new questionnaire of musculoskeletal disorder could be constructed by this model. Conclusion: A more valid questionnaire with a small number of items and the quantitative weight scores useful for the relative comparisons are the main results of this study. While the absolute reference value applicable to the wide range of populations was not estimated, the basic intent of this study, developing a surveillance fool through quantitative validation of the measures, would serve for the systematic disease prevention activities.