• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2008

Since the shipbuilding industry is at its peak to assimilate the large volume of orders in recent years, the Floating Dock has been an alternative to the dry dock which takes a certain period of time to build. Hence the use of Floating Dock is steadily increasing. Since the Skid Launching System(SLS) is used in Floating Dock, the balancing of the ship while launching is important and achieved by adjusting the Ballast tank of the Floating Dock. In this paper a Floating Dock Control Simulator for SLS is developed through the on-line interface of VRC(Valve Remote Control), Tank Level & Draft Measuring System and Valve Control algorithm on Simulation Tank Plan.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.133-146
• /
• 1999

Mokpo coastal area is connected to the adjacent a long river and two large basins. It is essential for port planning coastal zone management and environmental impact study to analyze the data related to the ship operation and variation of current and water quality due to the development of water area including dredging reclamation and estuary barrage. The Yongsan river estuary weir and Yongam-Kumho basins discharge much of water through water gates for the purpose of flood control and prohibit salt intrusion at the inland fresh water area. To meet this purpose discharge through the gates have been done at the period of maximum water level difference between inner river and sea level. This discharged water may cause the changes of current pattern and other environmental influences in the vicinity and inner area of semi-closed Mokpo harbor. In this study ADI method is applied to the governing equation for the analysis of the changes on current pattern due to discharged water. As the results of this study it is known that the discharging operation causes many changes including the increase of current velocity at the front water area at piers approaching passage and anchorages. Discussion made on the point of problems such as restricted maneuverability and the safety of morred vessels at pier and anchorage. To minimize this influence the linked gate operation discharging warning system and laternative mooring system are recommended.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.81-86
• /
• 2016

The valves used to control or shut off the flow through a pipeline can be divided into many different types, including gate valves, globe valves, and check valves. Globe valves, in particular, have excellent properties, and because they can easily control the flow under high-pressure conditions, they are generally used in LNG ship and steam pipelines. In this paper, a method for changing the shape of a seat was suggested to solve the valve leakage problem from a structural perspective. In addition, the stress distribution and directional deformation were compared for each model. The suggested models were thus validated, and the optimized seat structure, which includes a self-supporting capability for decreasing the amount of leakage, was determined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1265-1273
• /
• 2015

A coal handling machine is a type of equipment used for loading coal, the main material in a steam power plant, along a conveyer belt from a ship, and is placed after the driving chain bucket. However, studies on the boom hoisting cylinder, which is a hydraulic system used to control the angle of the boom based on loading location, indicate that domestic models are insufficient, and are thereby often substituted with a foreign product. In this study, a technique for analyzing the contact pressure in a thick-walled cylinder was established by comparing the contact pressure, which is calculated theoretically based on the results obtained from FEM simulation, and by checking whether the working oil is leaking from the boom hoisting cylinder using a v-seal. In addition, the driving motion was simulated according to the strokes of the cylinder, and the structural stability was verified under the maximum output conditions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.145-147
• /
• 2010

This study is the visually emotional identification lighting for easy to distinguish using 3colors LED on AtoN facility in shore and harbor, which have realized a controller for certainly express the mouth of a harbor by red light and green light of both sides a harbor and for synchronization at a time of right and left or serial sequential the harbor guidance light through synchronizer or timer by GPS. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting differ from great many lighting of harbor with variable color lighting the lighthouse body and vertical layer color lighting using LED. The function of AtoN is adapted that guidance light through synchronization or serial sequential lighting and display of harbor safety message by CW lighting, and this system is the power consumption greatly reduce by candle alternated high light LED.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.387-388
• /
• 2010

An open water rudder test was carried out to figure out the flow characteristics around a twin rudder at $Re=1.5\times10^4$. In the analysis, the unique characteristics of a twin rudder, which effects rudder farces, were explained. The analysis is included varying angles of attack fram 10 to 30 degree. In this paper, the measured results has been compared with each other to predict the performance characteristics of a twin rudder's 2-dimensional section by 2-frame grey level cross correlation PIV method. The side force of the rudder could be mainly improved at 0.75L.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.383-384
• /
• 2010

The control surface on a ship is to control the motion of it in forward and backward states. In this paper, the measured results has been compared with each other to predict the backward flow characteristics of the single rudder's 2-dimensional section at $Re=2.0\times10^4$ using 2-frame grey level cross correlation PIV method especially, The separation region appears at 10 to 20 degrees angle of attack in a forward state. The separation point and boundary layer demonstrate in the same angle of attack compared it with the forward states.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2005

Since High Tensile Steel has been widely used to thin plate on the steel structure and marine structure, It has increased possibility of buckling. Especially, initial deflection of ship structure is mainly caused by heat processing of welding or cutting etc. This initial deflection has negative effect to thin plate, which would incur a complicated nonlinear behavior accompanied with secondary buckling. If idealized initial deflection is considered in early marine structure design of secondary buckling, accuracy and reliability will be improved considerably. The measurement data of initial deflection from experiment is applied to finite element series analysis. For FEA(ANSYS), Applied nonlinear buckling analysis is used by Newton-Raphson method & Arc-length method included in this program.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.256-261
• /
• 2013

The AIS(Automatic Identification System) has been widely used for ship safety at sea over the last 10 years. The AIS traffic load at VDL(VHF Data Link) has been continuously increased. As the traffic load at VDL increases, the quality of AIS service may be deteriorated. In the previous research, the AIS traffic has been analyzed in the major ports of Korea, and its problem due to traffic overload has been suggested. However, no solutions has been given so far. In this paper, the method of autimatically controlling the VDL traffic at AIS base station is represented.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.128-133
• /
• 2014

This paper is the study of BNWAS based on TLC. The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS to be used currently in the ship have difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. Although these data are mainly used for the safe navigation of ship, their usability may be enhanced if they are managed to control the BNWAS equipment with sensors. The purpose of this system is prevent the marine accidents on sailing voyages due to drowsiness of watchers. On Night sailing, watcher is collected the navigation information from multiple devices and he determines the safe operation of the ship through continuous monitoring.