• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.364-372
• /
• 1999

In this paper, mechanical characteristics of micro-defects in granitic rock was studied. Crack spacing and length were investigated by scanline survey in specimen of granite. To estimate the direction and distribution of potential microcrack in granite, thin sections were made for three direction of Rift, Grain and Hardway axis of the rock specimen. The density and length of microcrack were investigated quantitatively. Three directions of microcracks are comparatively perpendicular. Crack density varies as direction differs, but crack length doesn't show influence of direction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.610-616
• /
• 1990

The fracture mechanics analysis of surface cracks in plates and cylindrical geometries is important in the integrity evaluation of flawed structural components. The objective of this paper is, thus, to numerically investigate an interaction effect of two surface cracks in plate and cylindrical geometries. The effect of crack spacing on the magnitude of the stress intensity factor(K) is investigated using the line-spring model. For the case of a finite plate under uniaxial loading, the effect of crack spacing on the K values is negligible. However, for the case of a cylinder under moderate internal pressure, a significant increase in K values is observed at the deepest point of the surface crack.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.346-351
• /
• 2006

본 논문은 콘크리트 표면 균열 영상에서 균열의 특징을 추출하기 위해, 영상 처리 기법을 적용하여 균열의 특징(길이, 폭, 방향)을 자동으로 추출 및 처리 할 수 있는 기법을 제안한다. 본 논문에서 적용된 영상 처리 기법으로는 균열 영상의 빛을 보정하기 위하여 모폴로지 기법인 채움(Closing)기법을 적용한다. 균열의 경계를 명확히 추출하기 위하여 고주파 강화 필터링을 적용한 후, 8가지 색상(검정, 빨강, 파랑, 초록, 노랑, 자주, 주황, 하늘)으로 명암 값을 분류하고 그 중 빈도수가 가장 높은 색상을 가진 명암 값을 제거한 후에 추출한 영상을 이진화한다. 이진화된 영상에서 콘크리트 표면 균열의 실거리 측정을 위한 임의의 선을 제거하기 위하여 위치 히스토그램을 적용하여 임의의 선을 제거한다. 임의의 선이 제거된 균열 영상에서 $5\times5$ 마스크를 적용하여 균열을 확대시키고, 3차례에 걸쳐 잡음 제거연산을 수행하여 균열의 후보 영역을 선택한 후, 후보 영역으로부터 특정 균열들을 추출한다. 추출된 특정 균열을 모폴로지 기법인 제거(Opening) 연산을 수행하여 균열의 특징이 일정하게 유지되게 하고 미세하게 끊어진 부분을 보정하여 균열의 특징(길이, 방향, 폭)을 측정한다. 실제 콘크리트 표면 균열영상을 대상으로 실험한 결과, 특정 균열이 효율적으로 추출되었고, 특정 균열의 길이, 방향, 폭의 등이 정확히 추출 및 계산되었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.287-300
• /
• 2002

Composition Presplitting Angle Cut (COPA-Cut) is a newly developed blasting method for tunnel excavation. Contrary to existing methods, COPA-Cut first creates presplitting by tension crack in cut. In this study, field tests measuring the advance efficiency, noise and ground vibration were performed in order to verify the presplitting effect. To compare the economy and workability, tests were simultaneously performed by COPA-Cut and existing method on the same condition. Results show that COPA-Cut increased advance efficiency and decreased noise and ground vibration. Also, it was confirmed that COPA-Cut is superior to existing method in terms of economy, workability and quality control.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.529-537
• /
• 2021

Membrane-type hull and cargo holds have been designed and built for large ship. However, there is a growing interest in applying the same technology to small and medium-sized Liquefied natural gas(LNG) carriers to meet the recent increase in demand for LNG as an ecofriendly fuel and for expanding LNG bunkering infrastructure. The purpose of this study is to apply the IMO Type-B tank to small and medium-sized LNG carriers and verify the safety and suitability of the design. Fatigue crack propagation analysis was performed to install a partial second drip tray installed at the lower part of the LNG cargo tank by calculating the amount of leaked gas in the support structure supporting the cargo tank. First, a program for fatigue crack propagation analysis was developed, in which Paris' law and British Standard 7910 (BS 79110) were applied based on the International Code for the Construction of Equipment and Ships Carrying Liquefied Gases in Bulk, an international standard for LNG carriers. In addition, a surface crack propagation analysis was performed. Next, a methodology for assuming the initial through-crack size was developed to determine the size of the partial second barrier. The analysis was performed for 15 days, which is a possible return time after cracks are detected. Finally, the safety and suitability of the IMO Type-B for LNG cargo tanks required by international regulations were verified. For the accurate analysis of fatigue crack propagation, it is necessary to develop and verify the analysis procedure based on direct analysis and international regulations.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.230-242
• /
• 2019

While various automatic rock fracture survey methods have been researched, the evaluation of the accuracy of these methods raises issues due to the absence of a metric which fully expresses the similarity between automatic and manual fracture maps. Therefore, this paper proposes a geometry similarity metric which is especially designed to determine the overall similarity of fracture maps and to evaluate the accuracy of rock fracture survey methods by a single number. The proposed metric, Scanline Intersection Similarity (SIS), is derived by conducting a large number of scanline surveys upon two fracture maps using Python code. By comparing the frequency of intersections over a large number of scanlines, SIS is able to express the overall similarity between two fracture maps. The proposed metric was compared with Intersection Over Union (IoU) which is a widely used evaluation metric in computer vision. Results showed that IoU is inappropriate for evaluating the geometry similarity of fracture maps because it is overly sensitive to minor geometry differences of thin elongated objects. The proposed metric, on the other hand, reflected macro-geometry differences rather than micro-geometry differences, showing good agreement with human perception. The metric was further applied to evaluate the accuracy of a deep learning-based automatic fracture surveying method which resulted as 0.674 (SIS). However, the proposed metric is currently limited to 2D fracture maps and requires comparison with rock joint parameters such as RQD.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.192-197
• /
• 2012

In this paper, a non-contact microwave technique was presented to detect the surface crack of the metals. An open-ended coaxial cable line was used as a sensor at 11 GHz, and the reflection coefficients were measured by scanning along the metal surface including artificial surface cracks. A parameter, the K value which was defined as the difference between maximum and minimum reflection coefficients, was measured and used to estimate the crack depth. A linear relationship between the K value and crack depth was found. This study showed that non-contact detection of the surface cracks of metals is possible using the open-ended coaxial line sensor at X-band.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.217-222
• /
• 1997

본 연구에서는 국내에서 원심주조로 제작되어 소둔로내에서 사용되는 복사전열 튜브의 손상 및 균열발생 기구(mechanism)를 조사한 후, 파손된 튜브 샘플의 균열주위를 금속학적으로 관찰하고, 관찰결과 및 재료의 성분분석 결과를 분석하여, 튜브의 파손원인을 분석함으로써, 향후 균열발생을 방지할 수 있는 대책에 대해 연구하였다. 우선 복사전열 튜브의 내면 균열발생 부위에 대해 현미경 관찰을 실시하였으며, 균열부의 산화물 및 균열부근 튜브모재에 대해서 성분분석을 실시하고, 전자현미경(SEM, Scanning Electron Microscope)으로 균열을 상세히 관찰하여 그 결과로부터 파손원인을 규명하였다. (중략)

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.773-782
• /
• 2002

In this study, a series of fatigue tests are performed in order to estimate quantitatively the characteristics of fatigue crack growth rate according to the base metal, heat affected zone(HAZ) and weld metal, and the welding method and grade of strength of object steels, and the influence on fatigue crack growth rate according to the direction of welded line for high strength steels of SM570, POSTEN60, and POSTEN80 steels. From the fatigue test results, the retardations of fatigue crack growth rate are remarkable in case that the direction of notch is parallel to welded line than in case that the direction of notch is perpendicular to welded line because of compresive residual stress in weld metal & HAZ. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range. Meanwhile, fatigue safety is guaranteed sufficiently in the object steels because the fatigue crack growth rate in the range of fatigue crack propagation has a similar tendency to the test results & existing results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.409-417
• /
• 2014

To prevent the occurrence of fractures in metal structures, it is very important to evaluate the 3D crack growth process in those structures and any related parts. In this study, tension tests and two simulations, namely, Simulation-I and Simulation-II, were performed using XFEM to evaluate crack growth in three dimensions. In the tension test, Mode I crack growth was observed for a notched metal specimen. In Simulation-I, a 3D reconstructed model of the specimen was created using CT images of the specimen. Using this model, an FE model was constructed, and crack growth was simulated using XFEM. In Simulation-II, an ideal notch FE model of the same geometric size as the actual specimen was created and then used for simulation. Obtained crack growth simulation results were then compared. Crack growth in the metal specimen was evaluated in three dimensions. It was shown that modeling the real shape of a structure with a crack may be essential for accurately evaluating 3D crack growth.