• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.362-366
• /
• 1990

The resistance spot welding process has been extensively used for joining of sheet metals, which are subject to variation of many process variables. Many qualitative analyses of sampled process variables have been successfully attempted to achieve a uniform nugget size. In this paper, the electrode movement signal which is a good indicative of the nugget size was examined by introducing a mathematical model with four parameters. A neural network method was applied for the estimation of the nugget size by four parameters. The prediction by the neural network is in good agreement with the actual nugget size. The results are quite promising in that the qualitative estimation of the invisible nugget size can be achieved without destructive testing of the welds.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.132-133
• /
• 2005

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.77-87
• /
• 1982

The purpose of this study is to estimate the reaction of rat subcutaneous tissues following exposure to the various concentrations of formocresol (100, 50, 20%), eugenol (100, 75, 50%), and sodium hypochlorite. (5, 3.5, 0.5%) The results were as follows: 1. As the concentration of formocresol was decreased, the inflammatory reaction was decreased conspicuously. 2. The inflammatory reaction of 100% eugenol was appeared to be similar to that of 75% eugenol. The inflammatory reaction of 50% eugenol was decreased conspicuously. 3. No significant differences were found in inflammatory response between 3.5% and 5% sodium hypochlorite. 4. The inflammatory reaction of 0.5% sodium hypochlorite was mild and appeared to be similar to that of saline solution in 7 days.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2060-2063
• /
• 1998

The proper placement of work-coil is needed for heating the interior of an IH rice cooker uniformly. It is possible that the flavor of rice is better by heating it through the optimal placement of the work-coil of the IH rice cooker. This paper describes the procedure and the result of finding the optimal placement of the work-coil by analyzing the properties of the rising temperatures of the interior through Taguchi Method.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.39-44
• /
• 2005

Recently according to the fashion of well-being, it is increasing that heat recovery ventilator is applied to the apartment housing, But the uniform locations of inlet and outlet in each room may provide better indoor air quality than ununiform locations of inlet and outlet. Proper design of air supply system requires information concerning the gas concentration difference between the ventilation effectiveness at the breathing line. This paper presents models to predict the gas concentration difference and the ventilation effectiveness, based on the two cases with proper number of outlets. As one of the results it is desirable to set the outlet location near the furniture which produce the contamination gas so much.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.280-282
• /
• 2003

In this paper we tried to analyze through the water tank model to solve these kinds of problems about the square plate earth electrode using general facilities with being compared with the theory formula announced before. The square plate earth electrode that haven't investigated so far is analyzed by being based on laid rod electrode. And the each kind of calculation model was investigated with the experiment of water tank. An experiment of the vertical square Plate electrode about laying depth in the center of the surface of the water has already done with the practical models that have different forms of electrodes.

• Proceedings of the ESK Conference
• /
• 1994.04a
• /
• pp.105-105
• /
• 1994

신체 부위를 이용한 Manual Materials handling(MMH) 작업시 무리한 작업하중의 취급으로 인하 여 많은 사고 또는 요통이 발생하기 때문에 작업자의 능력에 맞는 적정 하중에 대한 연구가 필요 하다. MMH작업의 적정하중에관한 연구는 미국 등의 나라에서는 많이 이루어져 왔으나 우리나라에서 는 연구되어 있지 않다. 미국의 경우 NIOSH Guideline을 만들어 MMH시 작업지침으로 활용하고 있으 나 이 지침을 그대로 우리나라에 적용하기에는 신체조건이 달라 우리나라 고유의 연구가 필요하겠다. 적정하중의 연구에는 많은 시간과 경비가 필요하기 때문에 외국의 경우 심리 육체적방법(Psychophysical Method)을 사용하여 시간과 경비를 줄이고도 실제 8시간 작업시의 결과와 비슷한 결과를 얻었다. 본 연구에서는 MMH작업의 적정 하중결정에 있어서 심리육체적 방법을 사용하여 한국인 작업자에 대한 하중과 HIOSH Guideline의 RWL값과의 비교를 하였다. 학생군과 실제 작업자군의 피실험자에 대하여 심리육체적 방법을 적용하여 들기작업을 실험하였다. 6가지 들기 작업을 20분 동안 실시하여 피실험자들이 자신에게 적합하다고 생각하는 적정하중을 측정하였다. 그 결과, 학생군은 RWL값보다 평균 2.5배를, 작업자군은 3.4 배를 적정하중으로 정하였다. 따라서 HIOSH Guideline을 적용한 RWL값은 우리나라 작업자에게는 많은 여유가 있는 하중임을 보여 주었다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.208-209
• /
• 2004

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.234-235
• /
• 2004

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.278-280
• /
• 2004

본 연구에서는 아산시의 모종처리구역을 대상으로 합류식 하수관거 월류수의 발생특성을 파악하고자 유량 및 오염물질 발생경향, 오염물질별 상관관계 등에 대하여 살펴보았다. 조사 결과, 강우시 월류 발생초기의 오염물질의 농도는 강우에 의한 초기세척현상(First Flush)에 의해 상당히 높게 나타났으며, 강우초기의 높은 오염물질의 농도는 강우에 의해 희석되어 일시적으로 낮아졌다가 높은 강우강도에 의하여 급격히 상승하였으며, 이후 오염물질의 농도는 유량의 감소에 따라 점차적으로 감소하는 것으로 나타났다. 또한 수질항목별 상관계수를 보면, SS와 TP의 상관계수가 가장 크게 나타났으며, COD와 TP, SS와 COD의 순으로 상관계수가 높은 것으로 나타났다.