• Journal of Applied Biological Chemistry
• /
• v.59 no.4
• /
• pp.323-330
• /
• 2016

Pinellia ternata Breitenbach, the natural medicinal plant of the Araceae family, is a perennial plant originated from the East Asia, but also widely distributed in Europe and North America. Its tuber is used as traditional medicine for treatment of various diseases such as vomiting, inflammation, and traumatic injury. Pharmacological studies revealed that P. ternata possesses anticonvulsant, anti-tumor, insecticidal, and cytotoxic activities. Despite being well-known as the useful medicinal plant, there is no reliable, standardized method for origin discrimination. Ultra performance liquid chromatography-photodiode array detector and quadrupole time of flight-mass spectrometry based metabolite-profiling was applied to explore significant metabolite for origin discrimination between Korean and Chinese P. ternata. One compound was isolated from Korean P. ternata using repeated ODS column chromatography by bioactivity guided fractionation, and determined as [6]-gingerol according to the results of spectroscopic data including nuclear magnetic resonance and MS. This compound was selected as cosmeceutical biomarker by fingerprints, and it was associated to melanin inhibitory effect determining its origin authenticity. Furthermore, the calibration curve of biomarker was prepared using validated method for the comparison of content between Korean and Chinese P. ternata. This is the report to address the selection and successful validation of the discriminant metabolite for confirmation of Korean P. ternata.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.74-83
• /
• 1985

The primary productivity and chlorophyll a were measured at 3 stations in the western channel of the Korea Strait throughout the year from November 1983 to September 1984. The surface primary productivity in autumn 1983 ranged from 9.24-13.05 mg $C/m^3/h$ and chlorophyll a from $0.66-1.22\;mg/m^3$, and showed the highest value throughout the year. The surface primary productivity in winter 1984 ranged from 0.75-1.77 m $C/m^3/h$ and chlorophyll a from $0.19-0.41\;mg/m^3$. and these values were higher than those in summer. The surface primary productivity in spring 1984 ranged from 3.42-6.68 mg $C/m^3/h$ and chlorophyll a from $0.34-0.64\;mg/m^3$, and these values were lower than those in autumn. The surface primary productivity in summer 1984 ranged from 0.57-0.79 mg $C/m^3/h$ and chlorophyll a from $0.11-0.17\;mg/m^3$, and showed the lowest value throughout the year. The assimilation number of surface phytoplankton populations were relatively high, especially high value in autumn and spring, and low value in winter. The primary productivity and assimilation number were rapidly decreased with the increase of depth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2016

This paper presents a bond test to find the effect of shear key and edge length from the bonded FRP in near surface-mounted(NSM) retrofit using FRP plate. Main parameters in the test are the location and size of shear key and the edge length. For the test, 10 specimens were made by embedding FRP plate of $3.6mm{\times}16mm$ into $400mm{\times}200(300)mm{\times}400mm$ concrete block and fixing it by using epoxy. Tensile load was applied to the FRP of the specimens until failure and was recorded at each load increase. In addition, the bond slip and elongation of FRP were measured during the test. From the test, it was found that the further the shear key located from the loading, the higher strength we could get. The bond strength inversely depended on the size of shear key. Especially, when the size of shear key was to be lagger than certain size, the bond strength decreased to very low value; even less than that of the case without shear key. The bond strength somewhat increased corresponding to the increase of edge length from the bonded end of FRP to loading in spite of same bond length. The bond-slip between FRP and concrete governed overall deformation in the bond test of NSM FRP so that the effect of excessive slip is necessary to be considered in the design.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1206-1213
• /
• 2003

In order to use nutraceutical components in Yulmoo (Coix lachryma-jobi L. var. ma-yuen Stapf), the acceptability of Yulmoo for Takju (Korean rice wine) was examined in terms of the production of volatile components. When Yulmoo was added to the Takju made by commercial koji as a substitute of starch at 0 (rice 100%), 15, 30, 60, and 100%, the ethanol content slightly increased to 13.6, 15.2, 15.2, 14.1, and 13.8%, the Production of isobutanol and iso-imyl alcohol increased as the amount of Yulmoo increased. While the use of Yulmoo to the Takju as the nuruk (Korean traditional koji), inoculated with Aspergillus kawachii (AK) and Rhizopu japonicus (RJ), decreased the contents of n-propanol, iso-butanol, and iso-amyl alcohol as well as the contents of ethanol from 14.3% to 11.2 [AK], 7.5 [RJ], and 10.4% [AK + RJ]. The Yulmoo nuruk in Takju increased the production of acetaldehyde and ethyl acetate indicating the negative effect in the organoleptic evaluation. It was determined that the addition of Yulmoo as a starch source or as nuruk has a critical effect on the production of fusel oils and other volatile compounds in Takju fermentation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.191-203
• /
• 2018

Identify the effects of ISO quality management system on the durability of the enterprise by applying it to early startups and small - and medium-sized enterprises. In particular, the quality management system of a technology start-up small and medium sized companies is important in applying the management system to the financial, management and quality control services rather than to research and development. The quality management system is applied to the medical equipment manufacturers, mobile phone brokers, foreign Chinese companies, and components manufacturers for diesel engines.Try it. Check the case where the quality management system has been applied to the company concerned and the nonconformities have been improved. In addition, the success of the project was determined by applying the quality control system to maintain the stability and perpetuation of the company through the case of the failed selection. The company explains that recently, it must appoint internal auditors to carry out continuous improvement activities and that those who want the development and continuity of the company must reflect the quality management system.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.537-544
• /
• 2018

The purpose of this study is to identify the impact of well-being-oriented activities of university students in liberal arts and physical education classes on happiness. First, among well-being-oriented activities, females are more likely to have eco-friendly behavior, well-being-oriented, hobby-orientation and exercise orientation, and males are more likely to be better at purchasing well-being products and mental health. Happiness was found to be higher in boys than in outer happiness, self-controlled happiness, and inner happiness. By grade, there was no difference between men and women in well-being activities, and the happiness showed that the second and third grades were higher than the first grade, while the second and third grade were higher in inner happiness. The happiness level showed that the number of students who attended three sessions showed higher level of happiness. Second, among the well-being activities of students in liberal physical education classes, external happiness shows in hobby-orientation, mental health and exercise orientation. Self-regulating shows in well-being meal, hobby orientation, mental health. Inner happiness shows in well-being meal, hobby orientation, mental orientation and exercise orientation.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.100-107
• /
• 2004

The nano or micro sized structures of conducting polymer had been prepared by synthesizing the desired polymer within the pores of template of nano or micro porous membrane filter. In this study, we had tried to fabricate conducting polymer microstructures on an electrode by using electrochemical deposition adopting template synthesis. Our attention was focused on two different things, attaching template on the electrode and fabricating microstructures only at limited areas of the electrode. A conducting polymer, PEDiTT (poly 3,4-ethylenedithi-athiophene) solution was blended with PVA(polyvinyl alcohol) solution and used as an conducting adhesive. After attaching template membrane, the electrode were immersed in 0.5M pyrrole in 0.1M KCI solution, and electrochemical polymerization was performed. The growth process of the microstructures studied by SEM. The electrochemical fabrication of conducting polymer was performed by using two-electrode system. A large working electrode and a micro scale disc electrode were used for the confined area synthesis. Polymerization potential was 4V in an electrolytic solution made of KCI in deionized water. The optimum polymerization conditions were, i.e. (4V/100sec) for $250{\mu}m$ electrode and (6V/30 sec) for $10{\mu}m$ electrode.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2017

As per current seismic design codes, diagonally reinforced coupling beams are restricted to coupling beams having aspect ratio below 4. However, a grouped diagonally reinforcement detail makes distribution of steel bars in the beam much harder, furthermore it may result in poor construction quality. This paper describes the experimental results of concrete coupling beam reinforced with high-strength steel bars (SD500 & SD600 grades). In order to improve workability for fabricating coupling beams, a headed large diameter steel bar was used in this study. Two full-scale coupling beams were fabricated and tested with variables of reinforcement details and aspect ratio. To reflect real behavior characteristic of the beam coupling shear walls, a rigid steel frame system with linked joints was set on the reaction floor. As a test result, it was noted that cracking and yielding of reinforcement were initially progressed at the coupling beam-to-shear wall joint, and were progressed to the mid-span of the coupling beam, based on the steel strain and failure modes. It was found that the coupling beams have sufficient deformation capacity for drift ratio of shear wall corresponding to the design displacement in FEMA 450-1. In this study, the headed horizontal steel bar was also efficient for coupling beams to exhibit shear performance required by seismic design codes. For detailed design for coupling beam reinforced with high-strength steel, however, research about the effect of variable aspect ratios on the structural behavior of coupling beam is suggested.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.501-507
• /
• 2020

The purpose of this study is to identify the personal characteristics of college students participating in leisure activities and the impact of their leisure experience on job-seeking Stress, To achieve this purpose, subjects of this study were sampled 264 university students participant using purposeful sampling method for 2 months from september to october of 2019. Using questionnaires stratified cluster random sampling in university students in C city. Studies have shown that first, looking at gender, women receive more academic stress than men. Second, looking at the results of the school year, the first and fourth graders received more personality stress than the second and third graders. Third, if you look at the results of the major category, it turns out that students in the natural major receive more personality stress than in the social major category. In addition, students in the humanities major are more stressed out about the Family environment stress than in the natural major. Fourth, if you look at the results of the allowance, students who receive 400,000 won to 500,000 won and those who receive 100,000 won to 200,000 won or less are under stress from the family environment stress than those who receive 500,000 won or more. Fifth, if you look at the results of your experience in leisure activities, the more experience you have in leisure Therefore, college students will have to lay the groundwork for self-control through various leisure activities for job stress. activities, the lower your job-seeking Stress.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.329-353
• /
• 2010

This paper deal with government logistics policy in related low carbon in China. The government policy of promoting low-carbon way is more dependent on the top-down enforcement rather than voluntary market principles. It will succeeded in transforming the environment-friendly image, to focus on creating a mindset the company can go on voluntary carbon-reduction. The three factors of low-carbon economy and the new energy and industrial development policy is technology and funding, and that most of the government's policy has a crucial role. Due to the nature of the Chinese economy, government policies impact on the development of the industry is very important, and even for China's industrial restructuring of the logistics industry in the areas of government policy support for green economic growth, its role is expected to be very large. In Future, Chinese government will promote low carbon policies through the optimization of the logistics network to reduce energy waste, pursue the low carbon-reduction of logistics machinery and equipment, and develop an mode to appropriate demand for green low-carbon economic growth.