• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.66-77
• /
• 2014

UTIS(Urban Traffic Information System) directly collects link travel time in urban area by using probe vehicles. Therefore it can estimate more accurate link travel speed compared to other traffic detection systems. However, UTIS includes some missing data caused by the lack of probe vehicles and RSEs on road network, system failures, and other factors. In this study, we suggest a new model, based on k-NN algorithm, for imputing missing data to provide more accurate travel time information. New imputation model is an adaptive k-NN which can flexibly adjust the number of nearest neighbors(NN) depending on the distribution of candidate objects. The evaluation result indicates that the new model successfully imputed missing speed data and significantly reduced the imputation error as compared with other models(ARIMA and etc). We have a plan to use the new imputation model improving traffic information service by applying UTIS Central Traffic Information Center.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.157-167
• /
• 2011

Currently, interest on physical distribution is increasing due to burden of oil cost increases as oil price rises day by day. As interest grows, there are number of studies have been conducting on saving the cost of distribution. On the other hand, number of study on service of distribution is insufficient. Actually, subject of service of physical distribution have been studied by number of survey organizations, research organizations and mass media. Although, configuration for each organization is different from each other and it is hard to measure objective satisfactory factor of customers. This means needs for constructing standardized measuring tool as well as research on measuring service quality of distribution is not active. Therefore, this research is to compare and analyze compatibility of service quality measuring using SERVQUAL and SERVPERF and trying to clarify differences affected by importance service quality by each level to actual service quality. Also, this research is to make basic and standardized measuring model to improve quality of physical distribution especially using analysis of service quality and customer satisfaction of pallet pool service which contributes rationalization of distribution and reduce the cost by standardizing specification and size of pallet, allowing sharing of pallet. To conduct this research, case study of a company A is used where it is in a pallet pool business. Using this example, the goal is to give help on pallet pool business a strategic exercise if the business by point out major factors that affect customer satisfaction by collecting customer assessment along with examination of SERVQUAL and SERVPERF in measuring service quality if pallet pool service.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.749-756
• /
• 2015

This study focused on smartphone adoption of foreign students who are studying in Korea in digital media era. Smartphone is not only new media but also social media. Based on former research, factor for smartphone adoption of foreign students will be analyzed. Based on TAM theory technological attribute, individual attribute and social attribute were taken out as independent variables. Perceived ease of use and perceived usefulness are applied as mediator variables. In conclusion, some hypotheses for example service quality and individual attribute are rejected as variables which influence positively to mediator variable perceived easy of use. For the next research more various variables and nationwide sampling will be needed.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.211.2-211.2
• /
• 2012

천리안위성은 통신, 해양, 기상 임무를 띤 우리나라 최초의 정지궤도복합위성으로 지난 2010년 6월 27일 성공적으로 발사된 후 동경 128.2도, 적도 상공 약 35,800 km 고도의 정지궤도에 안착되었다. 이 후 약 6개월 여의 궤도상시험 기간과 2개월의 안정화 기간을 거쳐 2011년 4월 1일, 기상청은 위성자료 서비스를 위한 정규운영을 시작하였다. 천리안위성의 기상탑재체인 기상영상기는 다중채널 복사계로 한반도 주변뿐만 아니라 전 지구적 기후 변화 및 대기 운동 그리고 급변하는 기상상황을 감시하기 위해 실시간 관측과 전송 시스템을 갖추고 있다. 이 기상영상기를 운용하는 기상청 국가기상위성센터 지상국에서는 자료수신 및 영상전처리시스템을 갖추고 수신된 위성신호로부터 영상 분리 후 복사보정 및 기하보정을 수행하며, 위성자료배포시스템을 통해 일정 시간 간격 내에 사용자들에게 처리 자료를 배포하고 있다. 영상 복사보정은 기상영상기 내의 각 채널별 디텍터가 감지한 지구복사휘도의 전기적 신호를 지상에서 복사휘도와 휘도온도 값으로 변환하는 작업이다. 절대검정체로서 흑체와 우주보기 값을 이용하는 적외채널과 달리, 가시채널 디텍터는 절대검정체가 탑재되어있지 않기 때문에 우주보기 값 외에 대리검정 방법을 이용한다. 이러한 가시채널 노화도 분석에 달 관측을 통한 비교 분석이 한 방법으로 제시되고 있다. 천리안위성 기상영상기의 정규운영 1년간의 가시채널 디텍터의 노화도는 6 % 이내로 측정되었고, 이는 일반적인 정지궤도위성 센서의 노화도인 6 % 내외 값 변화량에 견주어 잘 운용되고 있음을 시사한다. 본 논문에는 천리안위성 기상영상자료의 품질 및 매개변수의 변화 경향도 함께 제시하였으며, 달을 이용한 기상영상기 노화 분석과 보정에 관한 내용을 싣고 있다.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.89-100
• /
• 2011

The MAGLEV (Magnetically Levitated Vehicle) system, which is under commercialization as a new transportation system in Korea, is operated by means of unmanned automatic control system. Therefore the plan of train operation should be carefully established and validated in advance. In general, when making the train operation plan, the statistically predicted traffic data is used. However, traffic wave can occur when real train service is operated, and the demand-driven simulation technology is required to review train operation plans and service qualities considering traffic wave. This paper presents a method and model to simulate the MAGLEV's operation considering continuous demand changes. For this purpose, we employed the discrete event model which is suitable for modeling the behavior of railway passenger transportation, and modeled the system hierarchically using DEVS (Discrete Event System Specification) formalism. In addition, through the implementation and experiment using DEVSim++ simulation environment, we tested the feasibility of the proposed model and it is also verified that our demand-driven simulation technology could be used for the prior review of the train operation plans and strategies.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.253-260
• /
• 2007

A multimedia converter is used to create media suitable for own environment. If the data complying with own demands can not be created, it may accompany with a problem that has to convert the data with another transcoder. In addition, conventional converters do not consider source QoS and target QoS sufficiently, meaning that users should have a significant knowledge base about various media in order to obtain desired results. These problems become limits on the UMA(Universal Multimedia Access) environment. In this paper, we create a suitable transcoding path before performing the Digital Item conversion in consideration of source QoS and target QoS. The created transcoding path performs the adaptive transcoding using unit exchanges featuring connectivity. The consideration of QoS allows users to use the multimedia easily. Since the proposed model, in addition, use the unit transcoder, it provides a excellent adaptive capability for new QoS.

• Journal of Gifted/Talented Education
• /
• v.26 no.4
• /
• pp.635-652
• /
• 2016

This study investigated operation plan for the Cyber Bridge Program based on the survey from teachers of science high schools. Teachers were found to be thinking it positive that cyber programs can be operated free from the time and spatial restrictions. They thought that teacher interactions are hard to occur and teachers' role in learning is limited as well. Also, the geographical, physical, and socio cultural minorities might have benefits from cyber programs either as regular programs or the before entrance programs. Therefore, the detailed plans are needed. Most of all, since the educational contents are the key for the programs, we suggested some contents categories and developmental criteria. As a result, the developments of high quality contents and financial supports for the successful Cyber Bridge Program are essential.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.249-255
• /
• 2007

The building of spatial database such as digital maps has been extensively achieved as a base of geographic information system. However, in the GIS system built by the organizations including local autonomous entities, there are some problems technically and systematically for a promptly updating of GIS DB. This research is to develop the object-oriented database updating system to efficiently update the spatial data at any time for a small area. It could be managed the history of spatial database such as creation, modification and deletion at a object level using the UFID of spatial data. This system could help to modify or update the changed geographical features in an office or in-situ promptly. Finally, it could be made the efficient updating manner of geographic data and the assurance of newest database.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.561-569
• /
• 2008

Currently, satellite image, aerial image and airborne laser scanning data are mostly used to build 3D image models. However, we are in need of quality 3D image models as current models cannot express topographic and features most elaborately and realistically. When making 3D image models, the model is first built and textures from terrestrial photos are applied to add realistic features to the model. This study analyzed techniques to use photogrammetry and laser scanning data to create a 3D image models with topography, building and statue that emphasize spatial accuracy, delicate depiction and photo-realistic imaging. 3D image models with spatial accuracy and photographic texture were built to be served via 3D image map services systems on the internet. The 3D image models can be used for various purposes, such as daylight and view right analysis, landscape analysis, facility management system.