• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.161-171
• /
• 2016

OBJECTIVES : Many roadway departure crashes on the freeway interchange are due to the running speed being greater than the design speed. This study aims to ensure a safe and pleasant driving experience for the driver by increasing the superelevation based on the running speed on the highway interchange ramp. METHODS : The mean running speed for each type of ramp is calculated on site survey more than 10 interchanges. Using the mean running speed, we calculated the superelevation and the side friction using the method given in "A Policy on Geometric Design of Highways and Street" (Pages 145-166, 2001). Then, we applied the modified method to the superelevation range. Finally, we ensured safety using the Degree of Safety that is proven by the centrifugal acceleration ratio as suggested by Joseph Craus (1978). RESULTS : The mean running speeds are 50 km/h and 65 km/h when the design speeds are 40 km/h and 50 km/h, respectively. After the application of the new method used in this study, the superelevation will be increased by 9.0% and 10.0% when the mean running speeds are 50 km/h and 65 km/h, respectively. CONCLUSIONS : A higher superelevation can give the driver a more comfortable and safe driving environment. However, the driver needs to be aware of snow and low-temperature conditions.

• Journal of the Korean Chemical Society
• /
• v.44 no.4
• /
• pp.305-310
• /
• 2000

Adsorpdon behaviors ofNi(II), Co(II), Sr(II), and(I) ions were nvestigated on amorphous alumina with varying pH at three different etalion concentrations under the condition of 0.I M ionlc strength.With increasingmctalion concentration, the percentage of adsorption decreased and the adsorption edge was shifted to a higher pH value. The adsorption data obtained usingthe metal ion concentration of $1.0{\times}10^{-4}$M were quantitatively analyzed by surfacecomplexation modelingof Ni(II) and Co(II) ions adsorbed at high pH (>8)were found to be in hydrolyzed forms.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.232-237
• /
• 2007

Introduction: To report the result of the thigh perforator free flap for the reconstruction of the soft tissue defect of the lower extremities and usefulness of this flap. Materials and Methods: We have performed 23 cases of thigh perforator free flap to reconstruct the soft tissue defect of the lower extremities between February 2004 and July 2005. The anterior aspect of the legs were 9 cases, the ankle joints were 4 cases, the dorsal aspect of the feet were 6 cases, the sole of the feet were 4 cases as recipient sites. The anterolateral thighs were 13 cases, the anteromedial thighs were 10 cases as donor sites. The size of the flap ranged from $4{\times}5\;cm$ to $12{\times}18\;cm$. The mean flap area was $73.2\;cm^2$. The length of the pedicle ranged from 5 cm to 15 cm. Every patient except children was operated under the spinal anesthesia. Results: 21 flaps (91.3%) survived, 2 flaps (8.7%) failed. In the 21 flaps that had survived, there were partial necrosis in 4 cases, which healed without any additional operation. In the 13 anterolateral thigh perforator flaps, 9 cases survived totally, 3 cases had the partial necrosis, 1 case failed. In the 10 anteromedial thigh perforator flaps, 8 cases survived totally, 1 case had the partial necrosis, 1 case failed. Conclusion: The authors had a good result with the thigh perforator free flap and believe that this flap is a good option for the reconstruction of the soft tissue defect of the lower extremities, because this flap has a thin thickness and it is easy to dissect the vessels. Moreover the patients can be operated with supine position.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.172-181
• /
• 1999

To develop the manufacturing technique for the powder builder of amorphous solid types, the water glass mixed with caustic soda dispersed into the methanol. Thus soluble sodium silicate was made a form of amorphous solid powder. In order to examine characteristics of water soluble sodium silicate $SiO_2/Na_2O$ mol ratio, we investigated solubility, thermogram, SEM, and BET analysis. pH buffering capacity, calcium-ion binding capacity as temperature change, and surfactant loading capacity were examined for characteristics as laundry detergent builder. $SiO_2/Na_2O$ molar ratio of soluble sodium silicate was 1.0, 2.4, 2.8, and zeolite was used in order to investigate basic characteristics of laundry detergent builder. Silicate used with laundry detergent was good for pH buffering capacity and solubility. But calcium-ion binding capacity and surfactant adsorption ability were lower. $SiO_2/Na_2O$ mol ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was a little higher.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.307-311
• /
• 1993

Ionophore, which contains 5-membered heterocyclic compound, was prepared. $Mg^{2+}$ was determined by salting-out technique using ionophore as a chelating reagent. After $Mg^{2+}$ was extracted into the acetonitrile layer as a Mg-$(Ionophore)_2$ complex from acetate buffered aqueous solution by salting-out extraction technique, absorbance of complex was recorded by atomic absorption spectrophotometry. Optimum pH was between 2.5 and 5.0 for extraction and 1:2([$Mg^{2+}$]/[ionophore]) complex were formed. The range of detection was 0.24ppm~2.4ppm and $Ca^{2+}$ and EDTA were interfered in the determination of $Mg^{2+}$.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.20-25
• /
• 1996

Trace levels of uranium and thorium in geologic samples are determined rapidly by a direct wavelength-dispersive X-ray fluorescence method. Relative intensity of scattered tube radiation was used as an internal standard to compensate for variations in instrumental operating characteristics. U and Th can be determined within a precision of ${\pm}10%$ and accuracy of ${\pm}15%$ or less with measuring times of 50 seconds for Th and 400 seconds for U, respectively. The results of XRF analysis were in good agreement with those of other methods such as nutron activation analysis and inductively coupled plasma atomic emission spectrometry.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.13-21
• /
• 1999

Silicate used as laundry detergent builder was good for pH buffering capacity and solubility but calcium-ion binding capacity and surfactant adsorption ability were lower. As $SiO_2/Na_2O$ molar ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was little higher. Anionic surfactant LAS (linear alkylbenzene sulphonate), nonionic surfactant LA-9 (lauryl alcohol EO-9) were used to investigate the detergency performance. Zeolite was better than sodium silicate in detergency performance. In case of LAS, detergency performance was good when $SiO_2/Na_2O$ molar ratio was lower. In case of LA-9, detergency performance was similar without discrimination of molar ratio of $SiO_2/Na_2O$.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.151-157
• /
• 1991

A sensitive stripping voltammetric study of the complex of indium with 8-hydroxyquinoline at a hanging mercury drop electrode was investigated in 0.1M acetate buffer solution. The effects of various analytical conditions on the reduction peak current of the adsorbed complex were discussed. Optimal analytical conditions were found to be the ligand concentration of $2 {\times}10^{-5}$M, solution pH 4.75, scan rate of 10 mV/s, deposition potential of -0.450V, a deposition time of 90 second. Interferences by other trace metals and Triton X-100 were also discussed. Detection limit was 0.2 ppb of indium after 90 sec. Deposition time, and the relative standard deviation(n = 10) at 4 ppb was 3.2%.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.937-942
• /
• 1993

Enzyme electrodes for amperometric measurement of ammonia was prepared by immobilization of L-glutamate dehydrogenase on an Immobilon-AV Affinity membrane and attachment to a glassy carbon electrode. Reduced nicotinamide adenine dinucleotide (NADH) was used as the electroactive species. The electrochemical oxidation of NADH was monitored at ＋1.0 volt vs. Ag/AgCl. Response was linear from $4.0\;{\times}\;10^{-5}\;to\;4.0\;{\times}\;10^{-4}$ M. The detection limit was 2.0 ${\times}\;10^{-6}$ M. Response time, the optimum pH and life time of enzyme immobilized membrane were 2 min, pH 7.3∼7.6 (Dulbecco's buffer solution) and about 25 days respectively. When the enzyme electrode was applied to the $NH_4^+$ determination with amperometric method, other physiological materials had no interference.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.799-805
• /
• 2010

Since 2000's, Korea has became the world-leading shipbuilding country with the competitive technologies in design and production. And with the China's economic growth, the three economies (Korea, Japan and China) handle 30 percent of the world`s freight cargoes. Shipping industry of Korea has been also grown up to the top 10 of the world with the newly constructed large ports. In spite of the growing demand for ship repair in Korea, its competitiveness analysis has been insufficient. This paper present the competitiveness analysis of ship repair industry of Korea with the consideration of condition of location, repair cost and technological competitiveness.