• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.5
• /
• pp.117-124
• /
• 2020

This study examined ornamental metals used as architectural members among metal artifacts excavated from ancient Buddhist temples and palaces in Korea. Through this, we approached the decorative characteristics of ancient architecture eaves. 1. The decorations used in eaves of Korean ancient architecture include roof-end tiles and ornamental metal. Through excavation examples, the technique of attaching ornamental metal to the rafters and corner rafters of high-ranking architectures in the 7th and 8th centuries (ornamental metal for rafter end, ornamental metal for corner rafter end), and tosu iron in the 10th century It seems to be fashionable. 2. Several buildings were built in ancient Buddhist temples and palaces. At this time, they differentiated ornamental metal according to the hierarchy of the building. The higher the hierarchy, the greater the difference in the number of ornamental metal installations, materials, and decoration techniques. In addition, ornamental metal used in eaves is an important factor in the discrimination of the times as the type, number of members, and patterns change depending on the era. 3. The great feature of the eaves metal decoration excavated in the 7th and 8th centuries is the attachment of ornamental metal to the rafters and horsetails. This seems to create a sense of grandeur by removing the weight of the roof and giving the impression constructed regardless of gravity by supporting it with non-material materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.727-728
• /
• 2012

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.73-85
• /
• 2009

An investigation was conducted to get the basic data for establishing structural safety and environmental management of tomato greenhouses in Chungnam region. The contents of the investigation consisted of actual state of greenhouse structures and environmental control facilities. Most of greenhouses were arch type single-span plastic houses and they had too low height for growing tomatoes. Frameworks of multi-span greenhouses were suitable, but those of single-span were mostly insufficient. Every greenhouse had thermal curtain movable or covering fixed inside the greenhouse for energy saving, and heating facilities were mostly warm air heater. Irrigation facilities were mostly drip tube and controlled by manual operation or timer. Almost all of the greenhouses didn't install high level of environmental control facilities such as ventilator, air circulation fan, $CO_2$ fertilizer, insect screen, supplemental light, and cooling device.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.4-39
• /
• 2009

The foundations of ancient wooden pagoda consist of the stylobate soil, exteriors, stairways and etc. The factors were different according to the time, region and the architects. As a result of many archaeological researches, we have the data of horizontal gutters as a part of the foundations of ancient wooden pagodas in Gogureyo, China, Japan. But so far archaeological researches have not revealed such data in Baekje and Silla~Unified Silla period wooden pagodas. In genarally, the eaves must protrude as much as the outer line of the foundation to protect its upper side from rain. The purpose of the aforementioned horizontal gutter was to protect the foundations of ancient wooden pagodas. In this article, we call this horizontal gutter the Naksubaji. After researching many archaeological findings of ancient wooden pagodas of China, Korea and Japan from 5th century to 7th century, it is suggested that the Naksubaji was installed to wooden pagodas of Baekje period in 6th century and Silla~Unified Silla periods in 7th century. In wooden pagodas of Baekje period in 6th century, Naksubajis were found in wooden pagodas of Gunsurisaji temple site, Neungsanrisaji temple site, Wangheungsaji temple site. Especially in case of the Wangheungsaji temple site, presumed line to make stylobate of wooden pagoda in Baekje period was confirmed by archaeological research and this case is similar to the early period wooden pagodas in Japan. Goryeocheok(ruler used in the Three Kingdoms) was used to construct wooden pagodas. According to the restoration plan of wooden pagodas to verify the protrusion of eaves, the ratio of the length of the foundation:the length of 1st storied building:the length of the center:the length of the corner was 4.9:2.7:1:0.9 between Gunsurisaji temple site pagoda and Wangheungsaji temple site pagoda. Also I found tne same length of tne 1st storied building between Gunsurisaji temple site pagoda and Wangheungsaji temple site pagoda. Therefore the exact scales and planning were adapted to the establishment of wooden pagodas in 6th century in Baekje period. But the Naksubaji was not producted after 6th century in Baekje period. Because the big wooden pagoda had been appeared, they were needed other style of the foundation. In wooden pagodas which were made in Silla~Unified Silla periods in 7th century, I found the Naksubaji in wooden pagodas in Youngmyosajl temple site, Hwangnyongsaji temple site, Sacheonwangsa temple site. The line of stone in Youngmyosajl temple site, the 2nd line expressed the area of pagoda, the relative analysis of the lower foundation between Neungsanrisaji temple site pagoda and Sacheonwangsa temple site pagoda were examined the Naksubaji. In Silla~Unified Silla periods, the establishment of wooden pagodas was started at 7th century. So they had the exactly details of wooden pagoda, but we had no data of the Naksubaji after the time made Sacheonwangsa temple site.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.2
• /
• pp.148-154
• /
• 2013

Han-ok (the Korean traditional house) is famous for its beauty and healthful aspects. However, its construction cost is too high because of the manual process of parts such as rafter, timber, etc. These days, many people want to build a modernized Korean traditional house at a low cost. In order to do so, the rafter machining process is required to be automatized using a CNC machine. It is also observed that, generally the timber does not have a uniform shape. Therefore, it is also needed to examine the timber shape before starting its processing. This paper presents the concept design of the rafter processing CNC machine, and a 3D laser scanning system. The laser scanner is developed to acquire 3D details of the timber shape. Furthermore, the results of simulated experiments are presented to investigate surface roughness during the machining process of the timber. Since cutting parameters largely influence on surface roughness and cusps formation, it is needed to achieve optimal machining parameters. Several experiments were carried out changing cutting parameters such as cutting tool diameter, feed-rate, and spindle speed.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.95-102
• /
• 2010

The combustion characteristics of roof 'Jucsim' structure was analysed using real scale fire test on wooden structure heritage building. the fire test model was made to consider roof timberling internal structure for a Sunglemun. Structure of test body layed lime, soil, 'Jucsin' and ceiling board excepting roof tile to find heat propagation process by setting thermocouples. The first test to find fire growth and heat propagation process in the part of ceiling. The second test organized to find the efficiency of fire proof paint between ceiling board and inside of Jucsim structure. The third test try to get the performance level of fire proof fabric with the same manner. The result showed from the test proof the heavy smoke exposure with limited effect of fire proof paint however, reliable fire resistance effect showed in case of fire proof fabric.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.515-527
• /
• 2013

Building energy simulations which are mainly used in Korea have evaluated the building energy performance with the different thermal conductivity of construction materials. In order to evaluate the energy consumption accurately, the difference in thermal conductivity of the wood used in stud for wooden structure was confirmed from the each simulation. In addition, the thermal transmission of building members and the thermal bridge at the conjunction of building members according to thermal conductivity from each simulation programs were researched. The thermal conductivity of pine that has the largest variation among the energy simulations was applied to the thermal properties of studs in wooden structure. The maximum error between the maximum and minimum thermal transmission of roof, wall, and floor slab was $0.023W/m^2{\cdot}K$. Plus, that thermal bridge at Rafter junction on the roof, roof-wall joint, and floor slab-wall joint was $0.025W/m{\cdot}K$. The heat transfer image for changes in temperature and the heat exchange were analyzed by HEAT2 program. The distorted temperature lines were found around the insufficient insulated connection parts. It was predicted that the temperature at the distorted parts in the analyzed image was lower than that of the other portion of the other structures.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.90-105
• /
• 2021

The shape of the roof is very important, as it determines the beauty of the exterior of Korean wooden architecture. In particular, the curve of the eaves is the most representative of the characteristics of Korean wooden architecture. Rafters and buyeon (浮椽), flying rafters, create curves for the eaves, and buyeon in particular makes the roof lighter and more dynamic. Although the function and role of buyeon are already known, nothing is yet clear about the beginning of its use in Korean ancient architecture. Accordingly, the purpose of this study is to determine when buyeon was first used in Korean architecture. To this end, I examined various records, buildings, remains, and artifacts that have architectural shapes in Korea, China, and Japan. The results are summarized as follows. First, the use of buyeon in China appears during the Northern Qi Dynasty (北齊) in the mid-6th century, but became common in the 7th century during the Tang (唐) Dynasty. Second, the use buyeon in Japan appears in the mid-8th century, when the capital was relocated from Asuka (飛鳥) to Nara (奈良). It corresponds with the time that Japan began importing Chinese culture directly. Third, the use of buyeon in Korea may have been introduced to Baekje from China in the mid-6th century, but it was not common. It is believed that it became common after active exchanges with the Tang Dynasty during the Unified Silla Period in the mid-7th century.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2019

The purpose of this study is to examine the design ＆ construction methods of the traditional landscape space of the past and the repair and maintenance of cultural heritages to maintain it today. To this end, the method of narrative description, process extraction and construction related to traditional landscaping were compared to each other based on the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages'. The results are as follows; First, to analyze at the description methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages' and related processes in the field of traditional landscaping. 『Imwongyeongjeji』 「Seomyongji」 was an encyclopedia of the overall construction method of the living space, describing the location, effect, and advantages and disadvantages of each component and presenting quantitative figures to institutionalize the construction of traditional landscaping spaces. 'Standard Specification for Repairing Cultural Heritages' presented the entire process of repairing cultural heritages, and it is becoming a kind of guide for reference at the site. Among them, foundation construction, roof construction, landscape construction, and fence construction were drawn as items that could be applied to traditional landscaping areas. Second, the traditional landscape space construction method was divided into the processes of foundation construction, roof construction, landscaping construction, and fence construction. Foundation construction is a way of repeating the process of land-tramping. During the construction of the roof, the tile-roofed building was built on top of the rafters and roofed with tiles. And thatched roof was made to a number of rice straws bundles to cover the roof one after the other. Instead of tiles, the stone roof was made of thin and wide stones, and the wooden boards were used for the single roof and the bark roof were constructed with many layers of dried corrugations. Landscape construction mainly consists of the Paving technique through tramping rubble and the construction of terraced flower by planting stone, plants, and shrubs on the top. According to the building materials, the wall construction was derived from the earth-stacked earthen wall, stone walls using stone and clay, marble walls made of tile patterns, and the construction of a board wall using a wood board as a wall. Third, comparing the construction methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages', 『Imwongyeongjeji』 「Seomyongji」 focuses on standardizing the construction methods to create a new traditional space. There is a difference in the setting of the scope of the 『Imwongyeongjeji』 「Seomyongji」 and the construction because 'Standard Specification for Repairing Cultural Heritages' provides the overall construction procedure considering the diversity of the cultural heritages. In addition, the traditional landscape space used to be a residential space in the past, but today, the maintenance process of the already established facilities as designated cultural heritages has been carried out, and construction methods have been added to create viewing conditions. In terms of the succession of traditional knowledge, some similar methods were found in the repair of cultural assets today, and some cases were also confirmed in the reconstruction of traditional technologies such as application of some materials or mix, separation of added facilities and introduction of efficient construction methods.