• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1417-1422
• /
• 2012

Alkyl glucosides were synthesized using the transglycosylation reaction of Celluclast, the cellulase from Trichoderma reesei, with cellobiose and various alcohols. Glucose as a by-product of the reaction was removed using the immobilized yeast system. Among the alkyl glucoside products, the acceptor products of methanol and ethanol were confirmed as methyl ${\beta}$-D-glucopyranoside and ethyl ${\beta}$-D-glucopyranoside via MALDI-TOF MS and enzymatic analysis. Optimal yields of methyl ${\beta}$-glucoside and ethyl ${\beta}$-glucoside were 65.3% (mol/mol) and 59.0% (mol/mol), respectively, based on cellobiose consumed.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.200-210
• /
• 1994

In batch bioreactor fermentations for cyclosporin A (CyA) production, good potential for bioprocess improvement was demonstrated in the immobilized cell system, providing appreciably better utilization of the catalytic activity of the biomass than the freely suspended cells, especially during the exponential phase. When concentrated nutrient medium was added pulsely during the exponential phase of cell growth(at hour 139 of fermentation), reactivation and regermination in both immobilized and suspended cell cultures were observed to contribute to the longevity of CyA production, maintaining maximum CyA titre until 250 hours of fermentation. Contrarily, simple batch fermentations without any supplement of medium in both systems showed repid decrease in CyA concentrations during the late stationary phase. Notably, the CyA yield coefficient $(Y_p/x)$ for the immobilized cell system was maintained quite high even after the pulse addition of the concentrated full medium, reaching almost 80% of the level attained during the exponential phase. This is in sharp contrast when compared with the corresponding value of 58% in the case of parallel-suspended cells. This pattern of CyA production resulted in considerably enhanced CyA production in the immobilized cell system, reaching almost 2 time higher maximum CyA production in comparison with the free cell system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.45-52
• /
• 2000

The purpose of this research was developing an integrated way to solve two typical tolerance optimization problem i.e. optimal tolerance allotment and design centering. A new problem definition design centering-tolerance allotment problem (DCTA) was proposed here for the first time and solved. Genetic algorithm and coarse Monte Carlo simulation were used to solve the stochastic optimization problem. Optimal costs were compared with the costs from the previous optimization strategies Significant cost reductions were achieved by DCTA scheme.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.526.1-526
• /
• 1986

세균내 glutathione의 동태를 연구하기 위한 일환으로 P. mirabilis로부터 cysteinylglycine 분해효소를 정제 검토하였다. 본 균이 생산하는 cysteinylglycine 분해효소의 정제는 무세포추출액에 비해 비활성이 10배 증가하였고 0.68%의 낮은 수율을 나타내었다. 본 호소는 (NH$_4$)$_2$ SO$_4$ 침전과정에서 활성을 크게 손실하는 등 정제과정에서 불안정하였으며 투석 중에 형성하는 불용성 침전물은 4% Trition X-100 처리에 의해 효과적으로 용해되었다.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.04a
• /
• pp.115.1-115
• /
• 1979

Streptomyces속 균주가 생산하는 Phospholieste-rase를 몇가지 방법에 의하여 정제하여 그 성질을 조사 검토했다. 1) Sephadex G-50 및 DEAE-Cellulose Column Chromatography에 의하여 300배 정제하였으며 그 수율은 3.8%이었다. 2) b-PNPP을 기질로 해서 정제한 본 효소의 성질을 검토한 결과 본효소의 활성발현에 $Ca^{++}$ 이온이 필요했으며 $Ca^{++}$ 이온은 이 효소의 열안정성에도 도움을 주었다. 또 이효소의 최적작용 pH는 8.0부근이었으며 최적작용온도는 $50^{\circ}C$ 부근이었고 b-PNPP 을 기질로 한 Km 치 는 1.11mg/mι 이었다.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1011-1016
• /
• 1999

This study was performed to search a physical method having high yield and quality and minimum environmental pollution for extraction of pectin from apple pomace. Based on the physical solubilization of plant cell wall under the condition of high temperature, pressure and shearing stress, apple pomace was treated by a corotating intermeshing type twin-screw extruder with the diameter-to-length ratio of 1/20. The specific mechanical energy of extruder was introduced as system parameter for extrusion process modeling and the shaft speed, feed rate and moisture content as process variables. The yield, average molecular weight and galacturonic acid content of water-soluble polysaccharides obtained by extrusion were, respectively, modeled with the linear functions of the system parameter which was of the form as a linear function of process variables. The specific mechanical energy increased with increase of shaft speed and with decrease of feed rate and moisture content. Out of process variables, moisture content had the greatest effect on specific mechanical energy. The yield increased with increase of specific mechanical energy while the average molecular weight and galacturonic acid content increased with its decrease. In aspects of yield and quality of pectin, the results from this study showed the possibility to replace a traditional acidic method with the extrusion treatment of this study.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.228-234
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) In shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were peformed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67 g/L in 80 hours cultivation under the condition of carbon source concentration : shaking speeds(rpm) : oxygen pressure : CSL concentration : 4% : 460 rpm : 0.28 : 6%. On the other hand BC yield was 0.42 g/g in 80 hours cultivation under the condition of carbon source concentration : shaking speeds(rpm) : oxygen pressure : CSL concentration : 4% : 564 rpm : 0.21 : 2%. The BC production could be enhanced up to more than 2.4 times by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.47 g/L in the optimum condition.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.489-494
• /
• 2009

Two-step pretreatment process was investigated to efficiently hydrolyzed rape stems for obtaining fermentable sugars. The process was consisted of two consecutive steps as $200^{\circ}C$ and 15 MPa and $374^{\circ}C$ and 24 MPa with the flow rate of 5 mL/min. Under this condition, 5.5 (g/L) of glucose and 25.6 (g/L) of xylose were obtained from rape stems, showing 18% of glucose yield based on 25% cellulose in the rape stems. It was also found that this process could generate less amounts of toxic residues, such as HMF (Hydroxy- Methyl-Furfural) and other fulfural components during hydrolysis process. It could reaction maintain relatively high ethanol production yield as 90% of theoretical conversion yield from glucose. Therefore, this pretreatment process could be applied to hydrolyze other cellulosic and marine resources such as woods, stem and algae for bioethanol production.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.10-20
• /
• 1986

I. 윤활기유 제조시설소개 개요 1) 고급 윤활기유(HVI)생산공장으로서 그간 수입에만 의존하던 최고급 품질의 기유를 국내 수요업체에 안정공급 2) 세계 최신 공정인 Gulf Lube Oil Hydrotreating Process Type III (수소첨가 개질공정)채택 3) 국내 최초일뿐 아니라, 세계에서도 일본, 카낟에 이어 3번째로 건설 1. 고품질 제품 생산-고점도 지수, 산화안정성 및 열안정성 우수, 잔류탄소분, 윤황분, 질소분 극소, 방향족 성분 및 회분 극소, 색상 양호 2. 첨가제(특히 산화방지제 및 점도 지수 향상제)사용효과 상승으로 완제품 생산시 생산비 감소 3. 동일 VI 제품 생산기준 수율이 높음 - Hydrocarbon Structure 변화로 원료 유중 부적합성분의 윤활기유화 4. Severity 조절로 Production Mode 변경 용이 5. 양질의 부산물 생산 - HDT Naphtha, Middle distillate 6. 용제 추출기유는 원유종류 및 성상에 따라 제품특성이 결정되나, 사용가능 원유가 다양 하면서도 제품특성 및 품질이 일정함.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.409-412
• /
• 2004

일반적으로 반도체 생산 라인으로부터 생산되는 제품의 수율은 반도체의 가격에 직접적인 영향을 미치는 인자로 고수율의 제품 생산을 위해서는 반도체 생산라인 내부의 공기를 청정하게 할 필요가 있으며 이를 위해 고성능의 필터들이 사용되고 있다. 이러한 필터의 재료는 초극세 섬유로 작업자의 부주의한 조작에 의해 필터 표면에 핀홀(pinhole)둥이 발생하기 쉽다. 이러한 핀홀은 육안으로 관측이 힘들뿐만 아니라 필터의 여과 성능에도 악영향을 미치는 요소로 필터 생산업체에서는 이의 검출 및 보수에 많은 인력이 투입되고 있다. 본 연구에서는 필터 표면에 발생된 핀홀을 검출할 수 있는 자동 테스트 장치를 제안함과 동시에 제안된 테스트 장치의 효율적 운영을 가능케 하는 최적 운전 파라미터를 퍼지 모델링 기법을 이용하여 튜닝하고자 한다.