• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.132-132
• /
• 2017

고품질 농산물을 대량 생산하기 위한 가장 중요한 것은 적절한 관개관리이다. 생육시기별 작물 재배에 있어서 꼭 필요한 만큼의 물을 필요한 때에 준다면, 농업용수를 절약할 수 있을 뿐만 아니라, 작물의 한발 및 습해에 따른 피해를 최소화 할 수 있을 것이다. 기존의 토양 및 증발산량 기반의 자동 물관리 기술의 경우 직접적으로 작물의 상태변화를 실시간으로 확인할 수 없으며, 측정오차가 크고 작물수량이 많을 경우 측정시간 및 소요비용이 크다는 단점이 있다. 이를 극복하기 위해 최근 작물의 수분 스트레스를 비파괴적으로 측정하여 관개계획에 활용하는 연구가 해외에서 활발히 이루어지고 있다. 본 연구에서는 열영상 기술을 활용한 적정 관개계획 수립과 관련된 국내외 연구 사례를 소개하고, 오이를 대상으로 토양수분함량 변화에 따른 엽온 변화를 측정하고, 실시간으로 작물의 수분스트레스 여부를 분석하기 위한 예비실험을 실시하였다. 엽온 측정을 위해 적외선 센서(CT-300-232, DiWell, Korea)를 사용하였으며, 관개조건에 따른 엽온 및 FDR센서를 이용하여 토양수분변화를 모니터링 하였다. 세 가지 토양수분조건, 즉 200% $ET_c$(과다관개), 100% $ET_c$(적정관개), 30% $ET_c$(과소관개),을 시험구에 조성하고, 각각의 처리구에 따른 엽온변화를 측정하였다. 동일한 대기온도하에서 엽온의 변화를 살펴본 결과, 과소관개한 시험구에서의 엽온변화 폭이 가장 컸으며, 적정관개의 엽온 변화폭이 가장 작게 나타났다. 이는 물관리 조건에 따라 많이 줘도, 적게 줘도 스트레스 요인으로 작용함을 확인할 수 있었다. 향후 연구에서는 실시간 엽온자료와 더불어 기상자료를 활용하여 작물 수분스트레스 지수(Crop Water Stress Index, CWSI)을 산정하고, 이를 관개시설 운영 및 제어에 활용하기 위한 모듈 개발을 수행할 계획이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.102.2-102.2
• /
• 2015

진공 시스템의 기저상태를 지배하는 것은 대부분의 경우 용기 내면에 수십 단원자 층 정도로 흡착되어 있는 물이다. 용기 압력이 10-9 mbar 대가 될 때까지는 잔류기체의 90% 이상이 수분이고 압력을 10분의 1로 떨어뜨리려면 10배의 시간이 더 필요하다는 소위 1/t 법칙은 광범위한 흡착에너지를 가지는 물분자의 표면방출 특성으로 잘 설명되어진다. 용기가열 등 적극적인 표면처리를 하지 않고 전형적인 압력변화 양상은 그대로 유지하면서 절대적인 시간을 줄이는 가장 직접적인 방법은 물 배기속도를 가능한 한 높이는 것이지만 대부분의 고진공 펌프들에서 물배기속도만 더 증가하도록 만드는 것은 쉽지 않다. 크라이오 워터펌프(CWP: cryo-water pump)는 바로 이런 고민을 제대로 해결할 수 있는 유일한 실용적인 방안이라고 말할 수 있다. 다른 기체분자들의 배기는 일단 염두에 두지 않고 물배기만을 열심히 해서 배기시간을 단축하고 도달 진공도를 낮추는 것을 목표로 하는 장치가 CWP이다. CWP는 모든 기체에 반응하는 정통적인 크라이오 펌프에 비해 훨씬 간단하고 저렴하게 만들 수 있으면서도 진공 시스템에 큰 영향을 미칠 수 있지만 그동안은 물배기의 필요성에 대한 인식이 미흡하고, 또 부수적이고 추가적인 비용이 드는 것으로 생각되어 주목을 받지 못했지만 디스플레이와 반도체 산업을 필두로 물분압을 낮추고 생산수율을 높이는 것에 점점 더 관심이 높아지면서 CWP에 대한 수요도 높아지고 있다. CWP의 물배기는 아주 단순한 응축현상에 의존하므로 물리적으로 이해하고 성능을 예측하는 것이 직관적이지만 사용용도에 따라 물 이외의 기체분자들은 잘 통과시키면서 물배기는 최대화하는 최적설계가 요구되거나 터보분자펌프(TMP)와 같이 이질적인 고진공펌프와 조합하여 사용하는 경우 기체 온도 의존성을 고려해야 하는 등 까다로운 점이 있다. 본 보고에서는 CWP+TMP로 구성된 복합진공배기시스템을 설계하면서 CWP만의 물배기성능과 복합 시스템의 물 및 알곤 배기성능을 예측하고, 두 펌프의 상호관계에 대해 분석하며, 실제 만들어진 복합배기시스템을 사용하여 실험적으로 구한 물 및 알곤 배기속도 측정결과에 대해서도 간단하게 논의하려고 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.135-144
• /
• 2009

The primary focus of this study has been directed towards assessing the potential impact of construction method improvement on a reduction in project cost. A total of 90 actual application cases were collected from a public organization and private construction firms, and 32 cases were used in analysis by adopting a synthetic approach. The level of cost reduction was measured in terms of material and labor cost by comparing the existing method and the improved method. An analysis of the results indicates that project cost can be reduced by up to 5.26 percent compared to a normal project by adopting a synthetic approach. Additional benefits include the assurance of uniform quality, savings in terms of labor and/or materials, and improved productivity. The potential of the applicability of this approach to other types of buildings and the implications of research findings were discussed in detail.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.406-409
• /
• 2000

For the effective treatment of dye-processing wastewater, JLR(Jet-Loop Reactor) with active carbon supports were investigated. BOD removal efficiency was found as 99% when influent BOD concentration of dye-processing wastewater was 400 mg/L. $COD_{Mn}$ of effluent removal efficiencies were found as 86${\sim}$ 89% when these of activated sludge reactor were 62${\sim}$72%. Also, color removal efficiencies were found as 84${\sim}$87% when these of activated sludge reactor were 72%${\sim}$77%. After JLR with active carbon supports had been used, all of the $COD_{Mn}$, $COD_{Cr}$ and color removal efficiencies Increased when chemical precipitation was done. Consequently, JLR with active carbon supports was proved to be more excellent than the activated sludge reactor.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.39-45
• /
• 2004

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising method for cost-effectively defining nanoscale structures at room temperature and low pressure. A 5${\times}$5${\times}$0.09 in. quartz stamp is fabricated using the etch process in which a Cr film was employed as a hard mask for transferring nanostructures onto the quartz plate. FAS(Fluoroalkanesilane) is used as a material for anti-adhesion surface treatment on the stamp and a thin organic film to improve adhesion on a wafer is formed by spin-coating. The low viscosity resin droplets with a nanometer scale volume are dispensed on the whole area of the coated wafer. The UV-NIL experiments have been performed using the EVG620-NIL. 370 nm - 1 m features on the stamp have been transferred to the thin resin layer on the wafer using the multi-dispensing method and UV-NIL process. We have measured the imprinted patterns and residual layer using SEM and AFM to evaluate the potential of the process.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 1995

The erection process planning is to decide erection strategy and sequence that satisfies dock duration. The erection scheduling is to decide erection date of each block. The load profile varies according to scheduling and it is related to building cost. It must be possible to simulate the various combinations of process plan and schedule for optimal planning. To develop the process planning system for optimal planning, the system that generate the sequence of erection automatically and the load leveling system are required. This paper suggests the method that generates the erection sequence. The load leveling should be done to all the ships in the same dock batch to get reliable results. In this case since the search space is very large, efficient optimization method is needed Our research achieved the load leveling system using Genetic Algorithm. This system made it possible to simulate various process plans to which schedule is considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.744-751
• /
• 2004

This paper presents the implementation of the low cost and high speed RF ATE(Automatic Test Equipment) system, which can be a reasonable solution for reducing the test cost of RF devices. This paper suggests high speed and precise measurement capabilities which are realized by the 16 independent RF ports with high speed switching time and high accuracy digitizer using the industry standard Versus module eXtensions for Instrument(VXI) General Purpose Interface Bus(GPIB) interfaces. Also, the system has the capabilities of quad-site test which can dramatically increase the device throughput. This paper concludes with the demonstration of the implemented ATE system through the setup of RF Power Amplifier Module(PAM), which is under the most competitive market situation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.497-502
• /
• 2018

An analog to digital converter(: ADC) has been designed to extract video signals of marine X-band radar and convert to digital signals in order to produce rainfall information. X-band weather radars are suitable for high temporal-spatial resolution observations of rainfall over local ranges but they are very expensive and require professional management. The marine radars with 10-2 cost facilitate data collection and management as well as economic benefits. To validate the usefulness of the developed ADC, comparative observations were made with weather radar for short term precipitation cases. The rainfall distribution of marine radar observations are consistent with that of weather radar within a radius of 15 km. This demonstrates the usability of marine radar for rainfall observations.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.135-142
• /
• 2015

Appearance and rapid growth of the social network services (SNS) have led to changes in the distribution structure of information. Consumers can obtain various information quickly via the social network services and companies make use of a new advertising channel in them. In order to increase the effect of publicity activities through the social network services, development and application of public relations strategy by evaluating and analyzing the results of the activities is required. In this paper, a method for developing a low cost system to evaluate and analyze the results of public relations through the social networks is proposed. The proposed method was verified through building and running a demo system to collect and analyze data in the Facebook fan pages using MySQL database and PHP script on a Linux server.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.53-62
• /
• 2000

A concrete element is obtained through multi-steps, and its quality is affected by site conditions and control constituents of procedures. In these regards, in order to assure designed qualities of concrete and associated materials of the element good quality control method is necessary in various procedures. The existing quality control measures do not satisfy the requirements for the quality control activities at each production step. This study provides a more effective checklist for each phase of concrete work, which improves existing quality control checklist through extensive research on current practices and surveys from expertises. This paper also proposes the application of multi-facet codes to develop a customized checklist to improve the efficiency in field practices and the effectiveness in assuring the designed performance of concrete. This study finally provides a more effective checklist for each phase of concrete work by improving usability of the developed project sensitive matric quality control checklist through application experiments on construction project sites.