• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.867-869
• /
• 2007

TinyOS기반 무선센서노드를 사용한 실시간 계측 데이터 측정 및 제어기술은 유비쿼터스 센서 네트워크 분야에 주로 사용되어 왔으나 다양한 응용이나 신뢰성 있는 무선 네트워크 연구 개발에 한계가 있는 것으로 알려져 있다. 본 논문에서는 ATMega128L을 장착한 최소 8대 이상의 nano-24 센서 노드모듈과 메모리 용량이 매우 제한적인 무선 센서 노드에 적합하다고 평가받고 있는 Nano-Q+를 사용하여 전시물 주변의 환경 정보를 실시간 측정하는 시스템을 구현하였다. 전시물 주변의 센서들은 하나의 PAN Coordinator를 중심으로 Start-Mesh 네트워크를 구성하여 환경 정보를 측정한다. 환경 정보를 전송 하기 위해 측정된 계측 데이터를 센서 네트워크의 PAN Coordinator 노드로부터 환경 모니터링 서버로 효율적으로 전송하기 위한 TCP기반 전송 프로그램을 구현하였다. 실험 결과 센서 노드 수와 관련된 PAN의 크기 및 샘플링 주기에 상관없이 안정적으로 계측 데이터 수신이 이루어짐을 확인 하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.3
• /
• pp.25-32
• /
• 2004

An advanced algorithm for measurement of phase angle between two sinusoidal signals is proposed in this paper. This algorithm uses discrete sample data of two input signals for calculation of phase angle and amplitude. And the key parameters of the measurement algorithm are described by analytical express, so the calculation of phase angle is simplified. In this paper it is proved that harmonic distortion of the input sinusoidal signals does not affect the measurement value of phase angle by using the proposed algorithm when a whole cycle is sampled. And measurement error by the white Gaussian noise is very small compared by other algorithms.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2013

In this paper digital phase-shifter for multi-arm spiral antennas was designed by using Hilbert transform. All frequency components in input signal are phase-shifted for 90 degree by Hilbert transform, and the transform is implemented by FIT and IFIT. Digital phase-shifter generates two signals with phase difference of 90 degree by using Hilbert transform from input signals sampled by analog-digital converter(ADC), and then the input signal is phase-shifted for a given phase by using two signals. Hilbert transform based on digital phase-shifter is designed by Xilinx System generator, and the effects of input noise, FIT point, sampling period, initial phase of input signal, and shifted phase are simulated and its results are compared with Matlab results.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.237-244
• /
• 2009

The congestion in wireless sensor network increases the ratio of data loss and causes the delay of data. The existing congestion protocols for wireless sensor network reduces the amount of transmission by control the sampling frequency of the sensor nodes related to the congestion when the congestion has occurred and was detected. However, the control method of sampling frequency is not applicable on the situation which is sensitive to the temporal data loss. In the paper, we propose a new congestion control, ACT - Adaptive Congestion conTrol. The ACT monitors the network traffic with the queue usage and detects the congestion based on the multi level threshold of queue usage. Given network congestion, the ACT increases the efficiency of network by adaptive flow control method which adjusts the frequency of packet transmission and guarantees the fairness of packet transmission between nodes. Furthermore, ACT increases the quality of data by using the variable compression method. Through experiment, we show that ACT increases the network efficiency and guarantees the fairness to sensor nodes compared with existing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.396-401
• /
• 2019

A virtual rigid is modeled as the parallel structure of a virtual spring and a virtual damper. The reflective force from the virtual model is designed to be as large as possible to improve the realism of the virtual environment while maintaining the stable interaction. So, it is important to analyze the stability boundary of the virtual spring and damper. In the previous researches, the stability boundary is analyzed based on the zero-order-hold (ZOH) method, but it is analyzed based on the first-order-hold (FOH) method and the virtual damper in the paper. The boundary value of the stable virtual damper is inverse proportional to the sampling time and the maximum value of stable virtual stiffness is inverse proportional to the square of the sampling time. And the maximum value in the FOH method is increased to 110% of the value in the ZOH method. If the virtual damper is smaller than about 50% of the boundary value of the virtual damper in the FOH method, the stable virtual stiffness in the FOH method is several times larger than that in the ZOH method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.149-155
• /
• 2010

This paper was carried out to estimate pollution levels of various insulators in tunnel and establish cleaning period in each tunnel section. We estimate pollution level that is attached to insulators in environmental pollution area, industrial area, salt damage area. These results that the pollution quantity and conductivity were increased by pollution accumulation period. However, the conductivity showed each other big difference in each tunnel. In particular, the conductivity showed big in environmental pollution(tunnel A) and salt damage(tunnel C) area, It is considered to prevent accident that manage establishing periodic state of cleaning plan. Also, the Grease that spread on the insulator surface in existing is considered that it can prevent accident for long-term by restrain use.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.277-279
• /
• 2003

본 논문에서는 편재 컴퓨팅(ubiquitous and pervasive computing) 환경에 입력 시스템으로 사용하는 센서 네트워크에서 측정한 데이터의 품질 (sampling rate and quantization depth) 을 보증하며 네트워크 트래픽 또는 소모전력과 같은 비용을 최소화하기 위한 방법으로, 휴리스틱 알고리즘에 의한 비주기적 샘플링과 신뢰성 있는 전송규약을 사용하는 비주기적 전송방식을 제안한다. 그리고 제안한 비주기적 전송방식에 핵심기술인 신뢰성 있는 전송 규약의 비용을 최적화하기 위한 방법으로 ACK방식과 NACK방식을 패킷 에러율과 동일한 라우터를 사용하는 이웃 노드의 수와 같은 네트워크 상황에 따라 상보적으로 사용하는 상보적 방식(alternative method)을 제안하고, 전체 통신규약을 설계하며, 해석을 통해 성능을 분석하고, 네트워크 상태에 따라 두 방식의 성능상의 우열이 전환되는 전환점을 유도한다. 제안하는 상보형 신뢰성 있는 전송규약은 전체 센서 네트워크에서 처리되는 패킷의 비트 수를 최소화해, 각 노드의 총 전력 소모의 20-60%를 차지하는 통신모듈의 소비 전력을 줄일 수 있어 전력소모를 크게 개선 할 수 있다. 나아가서 다양한 센서 네트워크에서 설계한 전송규약을 바탕으로 하는 제안하는 비주기적 전송방식을 활용한다면 최적의 비용으로 측정하는 데이터의 품질을 보증할 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.238-252
• /
• 1998

Diffraction anomalies in the periodic strip grating over a grounded dielectric layer are investigated for the plane wave incidence case of both arbitrary(oblique) incidence angle and arbitrary polarization by use of the spectral domain method combined with the sampling theorem. Some numerical results for the Bragg and Off-Bragg blazing phenomena for the cases of arbitrary incidence angle and polarization as well as TE and TM polarization are presented along with discussions on those phenomena.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.369-371
• /
• 2001

이 논문에서는 디지털 시그널 프로세싱에 적합하지 않은 RISC타입의 DB-X 마이크로콘트롤러를 이용하여 MP3 플레이어를 구현한 방법을 제안한다. DB-X 에는 DSPA 모듈이 있어 FIR, FFT 등 계산이 많이 요구되는 부분을 DSP 수준으로 빨리 연산해 줄 수가 있으며 SSI 모듈이 있어서 44.1khz의 샘플링 주기를 가지는 D/A 코덱과 연결할 수가 있다. 또한 SSI와 음성 데이터가 저장되어 있는 메모리 사이를 CPU 부담없이 데이터를 전송하기 위한 DMA 모듈이 있어 MP3 데이터를 프레임 단위로 디코딩할 때 더블 버퍼링 기법을 쉽게 사용할 수가 있다.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.8-16
• /
• 2010

This paper presents a design of the successive approximation ADC(SA-ADC) applicable to a midium-low speed analog-front end(AFE) for the maximum 15MS/s CCD image processing. SA-ADC is effective in applications ranging widely between low and mid data rates due to the large power scaling effect on the operating frequency variations in some other way of pipelined ADCs. The proposed design exhibits some distinctive features. The "differential capacitor-coupling scheme" segregates the input sampling behavior from the sub-DAC incorporating the differential input and the sub-DAC output, which prominently reduces the loading throughout the signal path. Determining the MSB(sign bit) from the held input data in advance of the data conversion period, a kind of the signed successive approximation, leads to the reduction of the sub-DAC hardware overhead by 1 bit and the conversion period by 1 cycle. Characterizing the proposed design in a 3.3 V $0.35-{\mu}m$ CMOS process by Spectre simulations verified its validity of the application to CCD analog front-ends.