• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5385-5391
• /
• 2013

As on-line purchases is activated, customers' demand increases for the realistic and accurate digital information of a product design. In this paper, we propose a practical method that can generate a realistic 3D model of a real product using a 3D geometry obtained by a 3D scanner and its photographic images. In order to register images to the 3D geometry, the camera focal length, the CCD scanning aspect ratio and the transformation matrix between the camera coordinate and the 3D object coordinate must be determined. To perform this 2D-3D registration with consideration of computational complexity, a three-step method is applied, which consists of camera calibration, determination of a temporary optimum translation vector (TOTV) and nonlinear optimization for three rotational angles. A case study for a metallic coated industrial part, of which the colour appearance is hardly obtained by a 3D colour scanner has performed to demonstrate the effectiveness of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1040-1048
• /
• 2009

This paper proposes an auto flesh tone balance algorithm for the picture that is taken for people. General white balance algorithms bring neutral region into focus. But, other objects can be basis if its spectral reflectance is known. In this paper the basis for white balance is human face. For experiment, first, transfer characteristic of image sensor is analyzed and camera output RGB on average face chromaticity under standard illumination is calculated. Second, Output rate for the image is adjusted to make RGB rate for the face photo area taken under unknown illumination RGB rate that is already calculated. Input tri-stimulus XYZ can be calculated from camera output RGB by camera transfer matrix. And input tri-stimulus XYZ is transformed to standard color space (sRGB) using sRGB transfer matrix. For display, RGB data is encoded as eight-bit data after gamma correction. Algorithm is applied to average face color that is light skin color of Macbeth color chart and average color of various face colors that are actually measured.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.155.2-155.2
• /
• 2012

CTIO 4m 및 CTIO 1m 망원경으로 Westerlund 2의 UBVI 관측을 수행하여, CTIO 4m SDSS $u$ filter의 적색광누출 현상을 발견하였고 그 영향을 분석하였다. 적색광누출 현상은 filter의 투과함수가 설계와는 달리 장파장 영역에서 투과 존재하는 현상으로, CTIO 4m SDSS $u$ filter의 경우 B-V>1.4, V-I>2.0에서 그 영향이 나타나기 시작한다. SDSS $u$ filter의 적색광누출 현상은 별의 고유색지수와 상관없이 관측된 색지수가 클수록 영향이 크며, $B-V{\leq}1.8$, $V-I{\leq}2.8$의 범위에서는 보정이 가능하다. CTIO 1m B filter에서는 성간소광을 받지 않은 별과 성간소광을 많이 받은 별의 표준계변환 결과, $B_{CTIO1m}=B_{Standard}-0.055{\times}E(V-V)$에 해당하는 차이를 보였다. 이러한 차이는 CTIO 1m B filter의 투과함수의 단파장 쪽 날개부분이 표준 Johnson B filter에 비하여 단파장 쪽으로 많이 치우쳐있기 때문으로 보인다. 특히 Ballmer jump에 해당하는 파장인 370 nm에서 filter의 최대투과율에 비하여 32.2%에 달하는 투과율을 보이는데, 이는 Bessell B filter의 3.1%에 비하여 매우 큰 값이다. CTIO 1m 망원경의 Y4KCam CCD에서는 포화된 화소에 의한 crosstalk 뿐 아니라 포화되지 않은 화소에 의한 crosstalk 현상도 보였다. 짧은 노출을 준 영상에서는 5000 ADU 이상에서는 육안에 의한 crosstalk 확인이 가능하며, 포화되지 않은 밝은 별에 의한 crosstalk을 확인하지 않고 측광할 경우 백색왜성으로 오인할 가능성이 있으므로 측광 과정에서 좌표를 통하여 확인할 필요가 있다.

• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.128-133
• /
• 2021

During titration, several chemical reactions result in changes not only in the potential of chemicals, but also in the colors of the indicator. In a potentiometric titration, a titration curve is obtained by measuring the abrupt change in the potential at the endpoint. Generally, acid-base titration is performed by observing the color change caused by an indicator to determine the endpoint. The method of determining the endpoint by measuring the potential difference has been well established and commercialized; however, the devices that can obtain the endpoint by observing the color change are limited. Consequently, in this study, a simple and precise spectral endpoint detector was manufactured using a drop-counter comprising an infrared emitter and a phototransistor, a white light LED as the light source and photodetector, and an analog-to-digital converter (Arduino). Spectrator, a new named, showed excellent results in terms of the reproducibility of acid-base titration using thymol blue as an indicator. Herein, we present the results of the Spectrator-manufacturing process as well as the experimental results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.116-128
• /
• 2011

In this paper, we propose the structure of a high-performance face-detection engine that responds well to facial rotating changes using rotation transformation which minimize the required memory usage compared to the previous face-detection engine. The validity of the proposed structure has been verified through the implementation of FPGA. For high performance face detection, the MCT (Modified Census Transform) method, which is robust against lighting change, was used. The Adaboost learning algorithm was used for creating optimized learning data. And the rotation transformation method was added to maintain effectiveness against face rotating changes. The proposed hardware structure was composed of Color Space Converter, Noise Filter, Memory Controller Interface, Image Rotator, Image Scaler, MCT(Modified Census Transform), Candidate Detector / Confidence Mapper, Position Resizer, Data Grouper, Overlay Processor / Color Overlay Processor. The face detection engine was tested using a Virtex5 LX330 FPGA board, a QVGA grade CMOS camera, and an LCD Display. It was verified that the engine demonstrated excellent performance in diverse real life environments and in a face detection standard database. As a result, a high performance real time face detection engine that can conduct real time processing at speeds of at least 60 frames per second, which is effective against lighting changes and face rotating changes and can detect 32 faces in diverse sizes simultaneously, was developed.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.447-458
• /
• 2007

The objective of this study is to provide faster mobile web service by improving performance of Contents Cache used for mobile web service in the existing Mobile Gate System. It was found that two elements existed in Mark-Up page transcoded by Contents Generator. One of the elements was dependent only on the requested DIDL page and Mark-Up type. The other was dependent on each of the requested DIDL page, Mark-Up type, size of mobile display 모바일 장치 to request service, type of images available and color depth count of the images available. The conventional Contents Cache saved the entire Mark-Up page to hold both of the two elements. This caused the problem where storage space was not effectively used because reusable elements were repetitively saved in cache memory domain due to change in one of the elements even though all the other elements were the same. As a result, a larger number of transcoded Mark-Up pages could not be saved in the same cache memory size. Therefore, in this study, Mark-Up pages transcoded by Contents Generator were divided into two elements and were separately saved. Also, in order to respond to the demand for replacing data in cache with new data, this study applied two algorithms of LFU and LRU. This study proposed the method to implement cache performance of faster speed by enabling to save more number of the transcoded Mark-Up pages in the same cache storage space.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.211-217
• /
• 2012

Conventional GrabCut algorithm is semi-automatic algorithm that user must be set rectangle window surrounds the object. This paper studied automatic object detection to solve these problem by detecting salient region based on Human Visual System. Saliency map is computed using Lab color space which is based on color opposing theory of 'red-green' and 'blue-yellow'. Then Saliency Points are computed from the boundaries of Low-Frequency region that are extracted from Saliency Map. Finally, Rectangle windows are obtained from coordinate value of Saliency Points and these windows are used in GrabCut algorithm to extract objects. Through various experiments, the proposed algorithm computing rectangle windows of salient region and extracting objects has been proved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.245-251
• /
• 2015

In this paper, we present a design of PWM-controlled driving device for backlights in LED systems. The system can control either the brightness of the entire screen of backlights of LCD driven by LED or illumination or contrast of each partial segment of the entire screen. The PWM-controlled driving device includes the shift register that shifts the series data according to the clock signal prior to the generation of parallel data. It is also is comprised of a number of registers, a number of counters, a number of comparators, and a number of synchronizing gates (producing the PWM-controlled signals). The proposed device for backlights in LED systems can generate the PWM-controlled signal with a high degree of resolution without the increase of clock frequency. It also contains the PWM-controlled circuit that disperses and restrains the quantized noise.

• Journal of Digital Contents Society
• /
• v.16 no.4
• /
• pp.615-622
• /
• 2015

Recently virtual advertising is located in an important area of interest in the TV market by convenience of application and reduction of cost. The methods of inserting a virtual advertising in broadcasting are Up-link that method insert the image through the production equipment of the broadcasting station and dispatch equipment and technical personnel in the shooting and Down-streaming that method insert a virtual image automatically in relay video using image processing technology. In recent years, the image processing technology is an important research area in the virtual advertising area for automatically insertion of advertising images. In this paper, we propose the method to extract less-informative region in sports video using image processing. The proposed method extracts less-Informative region through rectangle detection of Hough transform and analysis of color histogram distribution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.168-177
• /
• 2005

In this paper, we numerically investigated the optimum pump light power resulting best compensation of pulse distortion due to both chromatic dispersion and self phase modulation (SPM) in long-haul 3×40 Gbps wavelength division multiplexing (WDM) systems. We used mid-span spectral inversion (MSSI) method with path-averaged intensity approximation (PAIA) as compensation approach, which have highly nonlinear dispersion shifted fiber (HNL-DSF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that HNL-DSF is an useful nonlinear medium in OPC for wideband WDM transmission, and in order to achieve the excellent compensation the pump light power is selected to equal the conjugated light power into the latter half fiber section with the input light power of WDM channel depending on total transmission length. Also we confirmed that compensation degree of WDM channel with small conversion efficiency is improved by using pump light power increasing power conversion ratio upper than 1.