• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2022

This study was conducted to investigate the effect of ventilation at high temperature on the control of powdery mildew, silverleaf whitefly two-spotted spider mite occurred at Korean melon cultivation greenhouse, and on leaf rolling and flowering of the plant in summer season. 'Alchanggul' grafted onto 'Hidden Power' rootstock was planted on soil bed with the distance of 40 cm. Three ventilation temperatures of 45℃, 40℃, and 35℃ as set points were compared. Ventilation treatment was done by control of side window operation from 18th June to 13th July when silverleaf whitefly, mite, and powdery mildew were occurred in all greenhouses. The temperature inside greenhouse was increased up to the set temperature point on sunny days and maintained for about 9 hours with high relative humidity at 45℃ condition. The differences of day maximum air temperature and day minimum RH were the highest at 45℃ treatment. After 11 days of treatments, the damage by powdery mildew and two-spotted spider mite was almost recovered at 45℃ treatment but not at 40 and 35℃. The population of silverleaf whitefly and two-spotted spider mite were significantly decreased at 45℃ treatment at 14 days after treatment, while powdery mildew symptom was not significantly decreased. Leaf rolling was observed at high temperature but not severe at 45℃ treatment. After 26 days of treatments, female flowers did not bloom at all at 45℃ treatment, and the number of male flowers was 1.2 among 15 nodes of newly grown shoots. As the result, it indicates that ventilation at the high temperature of 45℃ for about 2 to 3 weeks can be an applicable method to control above mentioned pests and disease, and to recover the vegetative growth of Korean melon by reducing flowering of the plant.

• Journal of Life Science
• /
• v.31 no.11
• /
• pp.1028-1036
• /
• 2021

Firefly luciferase (FLuc) can function as an efficient marker in the gene and viral therapies. Nonetheless, its clinical translation has been unaccomplished with the concerns on its exogenous nature and the similarity with human fatty acyl-CoA synthetase. In this study, we aimed to show safety of FLuc by conducting a set of preclinical experiments and a human use. Initially, FLuc permeability across the plasma membrane was investigated by delivering the FLuc-carrying viral vector, OTS-412, or the FLuc recombinant protein. After in vitro infection of OTS-412 into different cancer cell lines, FLuc activity was detected only in the cell lysates, but not in culture media. In addition, recombinant FLuc protein further showed the impermeability against the plasma membrane. Similar result was also observed in the in vivo experiment. After being injected into the VX2 tumor-bearing rabbit, the FLuc exclusively resided within the tumor tissue without being detected in the blood plasma or other organs. Human cancer cell lines originated from various organs were lysed and treated to the FLuc, and none of the human substrates was reactive against the FLuc. As a final step, FLuc recombinant protein was intravenously injected into a human. The luciferase was degraded with the half-life of 20 to 30 minutes in blood, and was untraceable from 1.5 hr after the injection. In addition, the blood plasma was nonresponsive against the fatty acids. Hematological analysis was also comparable between the pre- and post-injection. Altogether, our study collectively demonstrates the safety of the firefly luciferase.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.10-19
• /
• 2021

This study investigated the actual state and transformation of the major garden ornaments in Changdeokgung Palace(昌德宮) in the modern and contemporary period, focusing on Nakseonjae(樂善齋), Juhamnu(宙合樓), Jondeokjeong(尊德亭), and Daebodanji (大報壇址). This study can be used as useful data for establishing the restoration and maintenance plan of the garden ornaments in Changdeokgung Palace, and the main results of the study can be summarized as follows. First, according to a photo taken by the Czech Vráz, in 1901, a total of six garden ornaments, including a stone pond and odd-shaped stones, were located in the backyard of Nakseonjae. Since liberation, arbitrary relocation of garden ornaments has frequently occurred, and in the process, two odd-shaped stones, originally located on the first floor of the terraced flower bed, have been transferred to the backyard of Gyeonghungak(景薰閣). Second, unlike the late Joseon Dynasty when 「Donggwoldo(東闕圖)」 was produced, odd-shaped stones were arranged symmetrically in the backyard of Juhamnu in the early 1900s. It was a traditional style garden ornament with similar appearance, size, and design. However, all the odd-shaped stones in the backyard of Juhaumnu were relocated to other places in the 1970s and 1980s. One is located at the rear of Aeryeonjeong(愛蓮亭) through the entrance of Bingcheon(氷泉) and the vicinity of Geumcheongyo(錦川橋), and the other remains in front of the Yeongyeongdang Jangnakmun(演慶堂 長樂門). Third, among the garden ornaments located in the area of Jondeokjeong in the past, one odd-shaped stone is now relocated around the stone bridge near the pavilion and the Yeonghwadang(暎花堂) with its components separated. The bondstone near Yeonghwadang was relocated in 1990 for the purpose of installing an imitation of Angbuilgu(仰釜日晷). Another odd-shaped stone has been relocated to the front door of the Secret Garden(後苑), and now it is difficult to grasp the location. Fourth, the two bondstones remaining in the Daebodanji were actually building materials that were used as the foundation stone for the entrance pillars of the Yi Royal Office Building(李王職廳舍) during the Japanese colonial period. After liberation, the Yi Royal Office Building was reorganized into Imperial Estate Administration Office(皇室財産事務總局), and when the office building was burned down in 1960, the stone statues and foundation stones placed on the stylobate were relocated to the Daebodanji. The bondstone at Daebodanji is a representative example of construction materiasl being mistaken for gaeden ornaments.

• Clean Technology
• /
• v.28 no.4
• /
• pp.269-277
• /
• 2022

With the recent development of the biological enzymatic reaction industry, lactic acid (LA) can be mass-produced from biomass sources. In particular, a catalytic process that converts LA into acrylic acid (AA) is receiving much attention because AA is used widely in the petrochemical industry as a monomer for superabsorbent polymers (SAP) and as an adhesive for displays. In the LA conversion process, NaY zeolites have been previously shown to be a high-activity catalyst, which improves AA selectivity and long-term stability. However, NaY zeolites suffer from fast deactivation due to severe coking. Therefore, the aim of this study is to modify the acid-base properties of the NaY zeolite to address this shortcoming. First, base promoters, Ca ions, were introduced to the NaY zeolites to tune their acidity and basicity via ion exchange (IE) and incipient wetness impregnation (IWI). The IWI method showed superior catalyst selectivity and stability compared to the IE method, maintaining a high AA yield of approximately 40% during the 16 h reaction. Based on the NH₃- and CO₂-TPD results, the calcium salts that impregnated into the NaY zeolites were proposed to exit as an oxide form mainly at the exterior surface of NaY and act as additional base sites to promote the dehydration of LA to AA. The NaY zeolites were further treated with KOH before calcium impregnation to reduce the total acidity and improve the dispersion of calcium through the mesopores formed by KOH-induced desilication. However, this KOH treatment did not lead to enhanced AA selectivity. Finally, calcium loading was increased from 1wt% to 5wt% to maximize the amount of base sites. The increased basicity improved the AA selectivity substantially to 65% at 100% conversion while maintaining high activity during a 24 h reaction. Our results suggest that controlling the basicity of the catalyst is key to obtaining high AA selectivity and high catalyst stability.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.25-32
• /
• 2021

In line with future changes in the marine environment, Aids to Navigation has been used in various fields and their use is increasing. The term "Aids to Navigation" means an aid to navigation prescribed by Ordinance of the Ministry of Oceans and Fisheries which shows navigating ships the position and direction of the ships, position of obstacles, etc. through lights, shapes, colors, sound, radio waves, etc. Also now the use of Aids to Navigation is transforming into a means of identifying and recording the marine weather environment by mounting various sensors and cameras. However, Aids to Navigation are mainly lost due to collisions with ships, and in particular, safety accidents occur because of poor observation visibility due to sea fog. The inflow of sea fog poses risks to ports and sea transportation, and it is not easy to predict sea fog because of the large difference in the possibility of occurrence depending on time and region. In addition, it is difficult to manage individually due to the features of Aids to Navigation distributed throughout the sea. To solve this problem, this paper aims to identify the marine weather environment by estimating sea fog level approximately with images taken by cameras mounted on Aids to Navigation and to resolve safety accidents caused by weather. Instead of optical and temperature sensors that are difficult to install and expensive to measure sea fog level, sea fog level is measured through the use of general images of cameras mounted on Aids to Navigation. Furthermore, as a prior study for real-time sea fog level estimation in various seas, the sea fog level criteria are presented using the Haze Model and Dark Channel Prior. A specific threshold value is set in the image through Dark Channel Prior(DCP), and based on this, the number of pixels without sea fog is found in the entire image to estimate the sea fog level. Experimental results demonstrate the possibility of estimating the sea fog level using synthetic haze image dataset and real haze image dataset.

• Research in Plant Disease
• /
• v.29 no.3
• /
• pp.268-275
• /
• 2023

This study was conducted to confirm the utilization of Pleurospermum camtschaticum root extract as an organic agricultural material. Antioxidant activity of P. camtschaticum root extract, closely related to antibacterial activity, increased in a dose-dependent manner. In mycelial growth inhibitory activity, 100% P. camtschaticum root extract supressed over 70% for Colletotrichum coccodes and over 68% for Colletotrichum dematium. In the pepper fruit anthracnose development test, the size of the lesion decreased in a dose-dependent manner, which showed the same tendency as the previous results in inhibitory activity on mycelial growth. In the pepper seed germination and red pepper growth promotion test of P. camtschaticum root extract, oposite results was confirmed. The lower the concentration, the more the seed germination and growth promotion effects were shown. The phenol content of pepper leaves was also measured after pepper growth promotion test have been completed. The phenol content related to antibacterial activity increased in all treated groups compared to the untreated group. Therefore, the results of this study showed the possibility of development as an organic material.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.1-18
• /
• 2022

This study was conducted to prove that the service philosophy is the development principle of human society in the service age. From ancient times to the present, the service philosophy was tried to show the wisdom of the development of human society in all earth spaces including the East and the West. In addition, it tried to prove that the service philosophy was at the center of the development wisdom of many countries and individuals who flickered on all space on earth and all human time. The study showed that the differences between countries were in software rather than hardware. Furthermore, it was analyzed that countries with a service philosophy embedded in the center of software such as spirit and culture made a great contribution to human society. The cases of Greece and Rome, the Republic of Venice, the Republic of the Netherlands, followed by the United States and modern Korea prove this, and the Soviet Union can be seen to disprove it. The former was a society in which state-run software was strong, and the latter was a society in which hardware was strong. There is a big difference between the case of the state, which citizens have autonomously organized and operated, and the case of the upper-level state-led operation. Since the leadership of the upper classes is not based on the service philosophy, the accumulated software power is weak, so it can be said that the accumulation of wisdom in human society is weak. Therefore, while the essence of human society so far has been a society of self-centered animal ecosystems led by selfishness, the human society in the service age from now on can be said to be a society of plant ecosystems where mutual respect and self-centeredness coexist. Just as the society centered on the service philosophy in the past human society prospered and left a greater legacy to mankind, it is suggested that the human society in the future service era should be a human society of a plant ecosystem centered on the service philosophy. Further in-depth studies related to this are needed in the future.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.59-66
• /
• 2019

Purpose: Several radiologic reference lines have been used to evaluate individuals with a clubfoot but there is no consensus as to which is most reliable. The aim of this study was to identify which radiologic parameters have relevance to the predictability of additional surgery after Ponseti casting on clubfoot and the effect of clubfoot treatments that contain Ponseti casting and additional surgery. Materials and Methods: A total of 102 clubfeet (65 patients, 37 bilateral) were reviewed from 2005 to 2013. The patients were divided into two groups (Group A, those for whom the result of the Ponseti method was successful and did not require additional surgery; and Group B, those for whom the result of the Ponseti method was unsuccessful and required additional surgery), and the following parameters were measured on the plain radiographs: i) talo-calcaneal angle on the anteroposterior and lateral view, ii) talo-1st metatarsal angle on the anteroposterior view, and iii) Tibio-calcaneal angle on the lateral view with the ankle full-dorsiflexion state. Each radiograph was reviewed on two separate occasions by one orthopedic doctor to characterize the intra-observer reliability, and the averages were analyzed. Next, 20 cases were chosen using a random number table, and two orthopedic doctors measured the angle separately to characterize the interobserver reliability. Results: Groups A and B included 73 clubfeet (71.6%) and 29 clubfeet (28.4%), respectively. The initial talo-calcaneal angle and tibiocalcaneal angle in the lateral view were significantly different among the groups. In addition, inter- and intra-observer biases were not detected. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view were significantly different after treatment in both groups. Conclusion: Congenital clubfeet treated with the Ponseti method showed successful results in more than 70% of patients. The initial talocalcaneal angle and tibio-calcaneal angle on the lateral view were the radiologic parameters that could predict the need for additional surgical treatments. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view could effectively evaluate the changes in clubfoot after treatment.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.6
• /
• pp.519-527
• /
• 2019

Purpose: To evaluate the treatment result in polyostotic fibrous dysplasia classified according to the involvement of the femoral head. Materials and Methods: Twenty-three patients from March 1987 to March 2014 were reviewed retrospectively. Patients with no involvement of the physeal scar in the femoral head were classified as Type I, and those with involvement of the physeal scar were classified as Type II. A plain radiograph was used to measure the femoral neck shaft angle, articulo-trochanteric distance (ATD), and anterior bowing through the lateral view. A teleoroentgenogram of the lower limb was used to measure the leg length discrepancy and lower extremity mechanical axis. The pre- and postoperative femoral neck-shaft angle and ATD were compared to assess the degree of correction of the deformity. Results: Among a total of 46 cases (23 patients), 28 cases (23 patients) had lesions in the proximal femur. Type I were 16/28 cases (15/23 patients) and Type II were 12/28 cases (9/23 patients). The preoperative proximal femoral neck-shaft angle was 116.8° in Type I and 95.3° in Type II. The ATD was 12.08 mm in Type I and -5.54 mm in Type II. The deformity correction showed significant improvement immediately after surgery, the deformity correction was lost in Type II (neck shaft angle Type I: 133.8°-130.8°, Type II: 128.6°-116.9°, and ATD Type I: 17.66-15.72 mm, Type II: 7.44-4.16 mm). The extent of anterior bowing was 12.74° in Type I and 20.19° in Type II. The mean differences of 12 mm between the 9 patients who showed a leg length discrepancy and the lower extremity mechanical axis showed 4 cases of lateral deviation and 7 cases of medial deviation. Conclusion: In polyostotic fibrous dysplasia, when the femur head is involved, the femur neck shaft angle, ATD, and anterior bowing of the femur had more deformity, and the postoperative correction of deformity was lost, suggesting that the involvement of the femoral head was an important factor in the prognosis of the disease.