• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.6-10
• /
• 2006

The sulphur spinel $FeCr_{2-x}M_xS_4$(M=Ga, In) have been studied with Mossbauer spectroscopy, x-ray diffraction (XRD), and vibrating sample magnetometer. The XRB patterns for samples $FeCr_{2-x}M_xS_4$(M=Ga, In: x=0.1, 0.3) reveal a single phase, which the Ga and In ions are partially occupied to the tetrahedral (A) site. The Neel temperature for the Ga substituted samples increases from 180 to 188 K, with increase from x=0.1 to 0.3. While, it decreases from 173 to 160 K, for the In substituted samples of the x=0.1 and 0.3, respectively. The Mossbauer spectra were collected from 4.2 K to room temperature. We have analyzed the Mossbauer spectra using eight Lorentzian lines fitting method for the $FeCr_{2-x}In_xS_4$(x=0.1) at 4.2 K, yielding the 1311owing results; $H_{hf}=146.0kOe,\;{\Delta}E_Q=1.88mm/s,\;\theta=36^{\circ},\;\phi=0^{\circ},\;\eta=0.6$, and R=1.9. The Ga ions enter into the both sites octahedral (B) and tetrahedral (A), simultaneously the same amounts of Fe ions migrate from the A to the B site, this result is an agreement with XRD results, too. The ${\Delta}E_Q$ of the A and B site in Mossbauer spectra of the samples $FeCr_{2-x}Ga_xS_4$(x=0.3) are 0.83 and 2.94mm/s, respectively. While they are 0.56 and 2.36mm/s for the $FeCr_{2-x}In_xS_4$(x=0.3). It is noticeable that the ${\Delta}E_Q$ for the Ga doped samples are larger than that of the corresponding In doped samples, in spite of the larger ionic radius for In ions. The bond lengths of Cr-S, for the Ga and In doped samples (x=0.3) are found to be 2.41 and $2.43\;{\AA}$, respectively. We interpret that the larger covalence effect from the smaller bond length induces a large asymmetric charge distribution. Finally, it gives a large quadrupole interaction.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.113-135
• /
• 2004

This paper defines appraisal items and weights of the items for the purpose of developing an appraisal instrument that objectively measures employee's effectiveness of knowledge contribution. Deductive research is used for the development of appraisal items and delphi method for the development of weights of the items. In the deductive research the term, "effectiveness of knowledge contribution" is first defined. Then knowledge contribution activities are classified as "dimension of explicit contribution" and " dimension of tacit contribution" due to the characteristics of knowledge. Each dimension is divided again by components. The dimension of explicit contribution is divided according to the content of knowledge, and the dimension of tacit contribution is divided according to the extent of tacitness of knowledge contribution. The total components of dimensions are 7. The dimension of explicit contribution is composed of factual knowledge and procedural knowledge. The factual knowledge is made up of "procedural knowledge outcome" and "other factual knowledge". The procedural knowledge is made up of "procedural knowledge manual" and "lessons-learned procedural knowledge". The dimension of tacit contribution is composed of "agency", "model" and "Q&A". The basic framework for measuring 7 components of knowledge contribution is quantitative and qualitative approach. This paper is premised on the assumption that the outcomes of employee's knowledge contribution activities are recorded in the knowledge management systems in order to evaluate them objectively. The appraisal items are defined as follows: at the dimension of explicit contribution, in quantitative approach, "the upload number" or "performance number", and in qualitative approach, other employee's "referred number" and other employee's "content and format satisfaction evaluation"; at the dimension of tacit contribution, "demanded number of performance" After the development of appraisal items by the deductive method, delphi method was used for the analysis of the weights of the items with the total degree of knowledge contribution, 100. This research does not include the standard marks of the appraisal items. It is because when companies apply this appraisal instrument, they could use their own standard appraisal marks of the appraisal items considering their present situations and companies' goals. Through this almost desert-like research about the appraisal instrument of employee's knowledge contribution effectiveness, it proposes a cornerstone in the research field of appraisal instrument, which provides a standard for employee's knowledge contribution appraisal, and appraisal items that make organizational knowledge to be managed more systemically in business sites.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.108-118
• /
• 2019

Appreciating gardens in garden show has its meaning in appreciating concepts and ideas of artists, hidden inside of garden, as formative arts, as well as the beauty of the nature. This study is aimed to understand the intension of artists in visual expression through formative media in the gardens by assessing structure of visual narrative in the space with 20 artworks among the ones presented in 2018 Taehwagang Garden Show. The formative structure is delivered as contents and forms through formative media and formative language. Thus, for analysis on the artworks, the researcher assessed expressive characteristics of the media, through visual and space language, that forms the formative structure in the contest of narrative structure expressed in the gardens and findings of the analysis are as follows. First, for intertextuality obtained through media image, most of the artworks delivered message through 'figure image.' This means, the concept is delivered as 'affinity of actual objects' through the media and associated 'meaning and meaning action' are expected. Second, the characteristics of signs to show symbolism in the gardens were categorized into 'icon'. 'index' and 'symbol'. The results showed that most of the artworks expressed common characteristics between image and meaning, using 'icon' and 'symbol'. Third, as space formation components, based on formative principles, the components of 'dominant' and 'subordinate' roles were defined as the key components for meaning delivery. Also, it was understood that 'space configuration with overlapped image' and 'space configuration with transparency' were adopted to strengthen conceptional layers. Forth, for space occupation types, there were mostly central hall type, corridor type and passage space type and for open space type, the entire space area was conceptualized, instead of certain object. The circulation line was defined in the frequency order of circular type, pass type and return type. The study on the expressive characteristics of visual narrative in garden design is meaningful as it could build base data for the method of spatial design for visual development of concepts in the future.

• Korean journal of communication and information
• /
• v.46
• /
• pp.449-484
• /
• 2009

It has been said that Gwangjudream, nevertheless a free press, plays a role as a local press that it should be, in a situation that other local papers do not. This study aims to reveal the forces that influence the article production of Gwangjudream, and to examine the interrelations between them, through using the methods of participant observations and depth interviews. In this course, it is eventually purpose of providing more deep understandings on the present circumstances and problems of the local papers and having a chance to concern the concrete ways to enhance them. This study results in revealing the five forces that primarily influence the article production of Gwangjudream: 1) as a historical force, keeping the spirit of the first publication that look forward to playing a role as a local press that it sound be, 2) as an individual force, the habitus of its members that is critical of mainstream society and culture, 3) as an organizational force, non-hierarchical culture and the independence of the editorial rights, 4) as a habitual force, the deny of beat system, 5) as an economical force, the power of sponsors, financial poorness, and the competition for attracting subscribers. While the historical force and the individual force play a role as fundamental circumstances and the organizational force and the habitual force as practical circumstances for producing articles, they encourage to emerge the characteristics of the articles that are related to citizens' everyday life and reflect locality, and criticize and keep an eye on government and other public offices. However, the economical force provides the circumstances that weaken the characteristics of Gwangjudream. The results of this study question the perspective to overly regard it as coming from their economical weakness that the local newspaper do not play a role as a local press that it should be.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.345-350
• /
• 2014

The aim of this study was to investigate the effect of high temperature on the viability of probiotic organisms (Bacillus subtilis, Lactobacillus plantarum, and Saccharomyces cerevisiae) mixed with animal feed under controlled conditions by simulating a farm feed bin in the summer. Following inoculation of probiotics into the feed, the pH and probiotic viability were monitored during an 8-day incubation at room temperature. Sterile and non-sterile feeds displayed different patterns of pH changes, with increased pH in non-sterile feed at 2 days, but a pattern of decreasing pH at 4 days. The viabilities of S. cerevisiae and B. subtilis after mono/co-inoculation were maintained without substantial changes during the incubation, whereas L. plantarum viability tended to decline. In both non-sterile and sterile feeds, the probiotics were maintained or grew without any antagonistic effects. Probiotic viability was also tested upon a shift to high temperature ($60^{\circ}C$). There was no distinct change in pH between sterile and non-sterile feeds after the temperature shift. L. plantarum and S. cerevisiae could not survive at the high temperature, whereas B. subtilis displayed normal growth, and it inhibited the growth of contaminant microbes. Fungal growth was not observed in non-sterile feed 2 days after supplementation with B. subtilis. Therefore, heat resistant B. subtilis could be safely used in feed bins to inhibit microbial contamination, even at high temperatures. The prevention of elevated temperature in feed bins is necessary for the utilization of L. plantarum and S. cerevisiae during the summer season.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.848-858
• /
• 1995

The present study was conducted to investigate the effect of dietary vitamin A on the antioxidant status in ethanol-treated rats. Weaning rats were fed a basal diet until they reached about 160-180g body weight. Thereafter, four experimental groups were fed a liquid diet containing 36% ethanol of total calorie and four pair-fed groups were fed isocaloric sucorse instead of ethanol. Additionally, the liquid diet contained adequate amount of ${\beta}-carotene$, retinyl acetate, or 13-cis-retinoic acid except vitamin A deficient diet. The rats were sacrificed after 7 weeks of feedng periods. Significant decrease in hepatic vitamin E content was found in rats treated with chronic ethanol. However, dietary supplementation of retinyl acetate modified the change to some extent. Total vitamin C content of liver increased in vitamin A-deficient or ${\beta}-carotene$ groups with ethanol feeding. The ratio of reduced/oxidized vitamin C increased in the plasma and liver of ${\beta}-carotene$ group with ethanol feeding. Chronic ethanol intake did not change the total glutathione content of rat liver, but increased reduced glutathione(GSH)/oxidized glutathione(GSSG) ratio. This increase in hepatic GSH after chronic ethanol treatment. The changes of Se content in plasma and liver was not consistant. Fe content of liver increased by ethanol treatment, but this increase reduced in rats fed dietary retinyl acetate or 13-cis-retinoic acid. Fe content of plasma increased in vitamin A-deficient and ${\beta}-carotene$ supplemented groups with ethanol intake.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.64-79
• /
• 2010

Students with intellectual disabilities typically have great difficulties communicating their needs and wants and may get frustrated, anxious or show signs of aggressive behaviour. They are often unable to understand the concept of relationships with other people as well. This lack of social communication and interaction leads to poor motivation which increases other areas of difficulty in their lives. Therefore, to teach students with intellectual disabilities, it is essential to find special teaching methods to support their positive behavior. This paper proposes that special educational curriculum for students with intellectual impairments utilize natural environments(forests) and materials. The purpose of this study was to investigate the effects of Educational Programs Utilizing Forests on maladjusted behavior of students with mental retardation and to examine the positive effects of such planning practices. The subjects were middle school students who attended a special school for mentally-retarded students. They were divided into two separate groups- an experimental group and a control group. All subjects received the pre and post test using the same method. This program was applied to the formal educational process of middle school from March 1st to October 30th, 2009. In this experiment the results indicate that the effect of using a natural environment(forest) and the materials within a formal educational curriculum was positive as a type of horticultural therapy and that it supports positive behavior strategies in students with intellectual impairments. The usage of various natural materials including plants and flowers within the natural environments provide students with increased opportunities to participate. Teaching methods including natural materials help teachers engage with their students more easily during routine activities as their interest is already stimulated. This project will help students with intellectual impairments to build skills which enable effective participation and increase independence throughout their lives. This should be embedded into both routine and planned activities of the classroom Also, it offers a needed interior plan for the treatment space through an analysis of psychological factors of how the environment affects students.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.83-98
• /
• 2015

Many TV viewers use mainly portal sites in order to retrieve information related to broadcast while watching TV. However retrieving information that people wanted needs a lot of time to retrieve the information because current internet presents too much information which is not required. Consequentially, this process can't satisfy users who want to consume information immediately. Interactive video is being actively investigated to solve this problem. An interactive video provides clickable objects, areas or hotspots to interact with users. When users click object on the interactive video, they can see additional information, related to video, instantly. The following shows the three basic procedures to make an interactive video using interactive video authoring tool: (1) Create an augmented object; (2) Set an object's area and time to be displayed on the video; (3) Set an interactive action which is related to pages or hyperlink; However users who use existing authoring tools such as Popcorn Maker and Zentrick spend a lot of time in step (2). If users use wireWAX then they can save sufficient time to set object's location and time to be displayed because wireWAX uses vision based annotation method. But they need to wait for time to detect and track object. Therefore, it is required to reduce the process time in step (2) using benefits of manual annotation method and vision-based annotation method effectively. This paper proposes a novel annotation method allows annotator to easily annotate based on face area. For proposing new annotation method, this paper presents two steps: pre-processing step and annotation step. The pre-processing is necessary because system detects shots for users who want to find contents of video easily. Pre-processing step is as follow: 1) Extract shots using color histogram based shot boundary detection method from frames of video; 2) Make shot clusters using similarities of shots and aligns as shot sequences; and 3) Detect and track faces from all shots of shot sequence metadata and save into the shot sequence metadata with each shot. After pre-processing, user can annotates object as follow: 1) Annotator selects a shot sequence, and then selects keyframe of shot in the shot sequence; 2) Annotator annotates objects on the relative position of the actor's face on the selected keyframe. Then same objects will be annotated automatically until the end of shot sequence which has detected face area; and 3) User assigns additional information to the annotated object. In addition, this paper designs the feedback model in order to compensate the defects which are wrong aligned shots, wrong detected faces problem and inaccurate location problem might occur after object annotation. Furthermore, users can use interpolation method to interpolate position of objects which is deleted by feedback. After feedback user can save annotated object data to the interactive object metadata. Finally, this paper shows interactive video authoring system implemented for verifying performance of proposed annotation method which uses presented models. In the experiment presents analysis of object annotation time, and user evaluation. First, result of object annotation average time shows our proposed tool is 2 times faster than existing authoring tools for object annotation. Sometimes, annotation time of proposed tool took longer than existing authoring tools, because wrong shots are detected in the pre-processing. The usefulness and convenience of the system were measured through the user evaluation which was aimed at users who have experienced in interactive video authoring system. Recruited 19 experts evaluates of 11 questions which is out of CSUQ(Computer System Usability Questionnaire). CSUQ is designed by IBM for evaluating system. Through the user evaluation, showed that proposed tool is useful for authoring interactive video than about 10% of the other interactive video authoring systems.