• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.261-262
• /
• 2020

본 논문은 DC/DC 위상천이 풀브릿지 컨버터의 과도상태 개선을 위한 듀얼모드 제어를 제안한다. 기존의 discontinuous conduction mode (DCM)과 continuous conduction mode (CCM)을 이용하여 운용하는 위상천이 풀브릿지 컨버터는 각 모드의 상이한 전압게인의 특성을 고려하지 않아 급격한 로드 변동시 출력 전압의 언더슈트 혹은 오버슈트가 크게 발생한다. 제안하는 듀얼모드 제어는 DCM과 CCM 각 모드 별개로 제어가 적용되고 출력 전류의 변화에 대응하는 적응형 feed-forward 제어가 적용되어 컨버터의 과도상태를 개선할 수 있다. 듀얼모드의 제어 방법의 성능과 타당성을 시뮬레이션을 통해 입증한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.851-857
• /
• 2015

In this paper, we estimate the time-dependent C(t) integrals under elastic-plastic-creep conditions. Finite-element (FE) transient creep analyses have been performed for single-edge-notched-bend (SEB) specimens. We investigate the effect of the initial plasticity on the transient creep by systematically varying the magnitude of the initial step load. We consider both the same stress exponent and different stress exponents in the power-law creep and plasticity to elastic-plastic-creep behavior. To estimate the C(t) integrals, we compare the FE analysis results with those obtained using formulas. In this paper, we propose a modified equation to predict the C(t) integrals for the case of creep exponents that are different from the plastic exponent.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1001-1010
• /
• 2015

This paper estimates the time-dependent crack-tip stress fields under elastic-plastic-creep conditions. We perform Finite-Element (FE) transient creep analyses for a Single-Edge-notched-Bend (SEB) specimen. We investigate the effect of the initial plasticity on the transient creep by systematically varying the magnitude of the initial step-load. We consider both the same stress exponent and different stress exponent in the power-law creep and plasticity to determine the elastic-plastic-creep behaviour. To estimation of the crack-tip stress fields, we compare FE analysis results with those obtained numerically formulas. In addition, we propose a new equation to predict the crack-tip stress fields when the creep exponent is different from the plastic exponent.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.397-409
• /
• 2003

This paper describes an implementation of radix-4 trellis parallel architecture and backward state transition control trace back Viterbi decoder, and presents the application results to high speed wireless LAN. The radix-4 parallelized architecture Vietrbi decoder can not only improve the throughput with simple structure, but also have small processing delay time and overhead circuit compared to M-step trellis architecture one. Based on these features, this paper addresses a novel Viterbi decoder which is composed of branch metric computation, architecture of ACS and trace back decoding by sequential control of backward state transition for the implementation of radix-4 trellis parallelized structure. With the proposed architecture, the decoding of variable code rate due to puncturing the base code can easily be implemented by the unified Viterbi decoder. Moreover, any additional circuit and/or peripheral control logic are not required in the proposed decoder architecture. The trace back decoding scheme with backward state transition control can carry out the sequential decoding according to ACS cycle clock without additional circuit for survivor memory control. In order to evaluate the usefulness, the proposed method is applied to channel CODEC of the IEEE 802.11a high speed wireless LAN, and HDL coding simulation results are presented.

• Journal of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.91-97
• /
• 1966

The partition function for liquid water is developed according to the transient state theory of significant liquid structure proposed by Pak, Ahn and Chang. This theory assumes that the molecules may possess solid-like, transient and gas-like degrees of freedom in liquid state. Although liquid water has several special properties, for example, minimum molar volume at 4^{\circ}C$, the general theory of liquid can be applied successfully. The theoretically calculated values for thermodynamic properties at the liquid temperature range and for the critical properties are in good agreement with the observed values.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.389-395
• /
• 1995

기존의 천이노심 DNBR 벌점 평가 방법을 개선하여 불확실도를 줄이고 신뢰도를 향상시키며, 적용범위를 확대함으로써 보다 실제적인 DNBR 벌점 평가 방법을 제시하고자 하였다. 이를 위하여 영광 1호기 JDFA-V5H 의 천이노심을 대상으로 하는 일련의 분석이 수행되었다. 먼저 균일노심과 천이노심을 모형화 한 기준 제어군에서의 상대적인 물성치의 변화와 축방향에서의 DNBR 거동을 분석하였고 이에 따른 최소 DNBR 의 상대적 차이로부터 최대 럴점 조건 및 벌점이 적용되는 집합체를 선정하였다. 변수 민감도 분석 결과, 최대 벌점 조건은 과출력 (120% 출력), 고압 (2420 psia) 그리고 상부노심에서 상대출력이 많은 축방향 출력 분포를 갖는 조건이 선정되었고 천이노심 벌점은 V5H에만 부과된다. 천이노심 DNBR 벌점은 배열 민감도 분석을 통하여 노심내 V5H 분율의 함수로 표현됨을 알 수 있었으며, 기존의 보수적인 방법론에 비해 최소 3% 이상의 천이노심 벌점이 감소되는것으로 나타나 추가적인 여유도의 확보로 인한 설계의 탄력성을 기대할 수 있다. 이 결과는 IFM이 존재하는 원전연료 집합체 상부에 대하여 노심의 V5H 분율이 0.02 부터 1.0 까지의 정상 및 과도상태 노심에 대하여 적용할 수 있다.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.245-248
• /
• 2007

This paper provides some simple recursive formulas generation transition functions of finite cellular automata with triplet local transition functions under two states (0 and 1) and four different boundary conditions (0-0,0-1,1-0,1-1), and classify transition functions into several classes.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.22-27
• /
• 1967

The thermodynamic properties of the liquid oxygen are calculated by applying "The Transient State Theory of Significant Liquid Structure". The results show good agreement with experimental observations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.9-16
• /
• 2004

The state assignment for a finite state machine greatly affects the delay, area, power dissipation, and testabilities of the sequential circuits. In order to improve the testabilities and power consumption, a new state assignment technique based on m-block partition is introduced in this paper. The algorithm minimizes the dependencies between groups of state variables are minimized and reduces switching activity by grouping the states depending on the state transition probability. In the sequel the length and number of feedback cycles are reduced with minimal switching activity on the state variables. Experiment shows significant improvement in testabilities and Power dissipation for benchmark circuits.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.57-65
• /
• 2001

A numerical model for analyzing transcritical flow in open channel is tested to various cases of channel shape. As the numerical models developed for transcritical flow until now mainly focused on the application to only prismatic or hypothetical channels, there are some restrictions to apply the nonprismatic channels. In this study, to verify the accuracy and stability of second-order implicit ENO scheme, the numerical model was applied to the channels which haute the varying channel bed and width. Also the numerical model was applied to unsteady flow as well as steady flow. The study shows that the numerical model provides good accuracy in the calculation of stage and velocity with no numerical oscillation, particularly in the calculation of hydraulic jump and discontinous flow Then the implicit ENO scheme demonstrated good accuracy as a high-resolution scheme and stability as an implicit scheme.