• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.4
• /
• pp.68-78
• /
• 1990

절연파괴의 원인이 되는 절연체중의 공간전하의 여러 특성을 정량적으로 측정하였다. 전극에서의 주입전하가 트랩되어 주로 공간전하를 형성하는 것을 확인하였다. TSSP측정법으로 컬렉팅 전위를 결정하고 바이어스의 시간, 전압, 온도에 따른 공간전하 변화량을 측정하여 공간적 분포의 깊이를 조사하였다. 그리고 정상상태에 있어서 모델과 해석과 시험 결과가 비교적 잘 일치함을 발견하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.173-176
• /
• 2003

본 논문은 기존의 다치오토마타 모델을 적용하여 개성과 감성상태 모델을 제안한다. 기존 다치오토마타 모델을 2개의 오토마타로 분리하여 하나는 감성상태, 다른 하나는 개성을 모델링하는데 이용하였다. 사용자의 내부 감성과 개성은 Valence-Arousal 공간으로 정의된 감성상태를 바탕으로 구성하였고, 2개로 분리된 다치오토마타의 관계를 정의에 따라 구성하여 감성상태와 개성이 동시에 한 개의 오토마타 모델로 모델링 될 수 있는 가능성을 제시하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.4 s.18
• /
• pp.79-90
• /
• 2005

The purpose of this study is development of a finite element algorithm to find out the stressed condition, slipped direction and slipped dimension when some elements of cable-membrane structures are slipped from it's initially designed coordinates by external loads as wind or non uniform load and so on. In order to search the slipped behaviors of cable-membrane structures, a Arbitrarily-Lagrangian-Eulerian(ALE) finite element formulation is introduced. In these procedures, a stiffness matrix related with ALE concept is formulated and a FE analysis program for cable-membrane structures with slipped elements is developed. Various examples for cable and membrane structures are presented to verify the program's validation. The results are shown good agreement with that of existed one.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.105-118
• /
• 2008

Shotcrete is one of the main support materials in tunnelling. Its bonding state on excavated rock surfaces controls the safety of the tunnel: De-bonding of shotcrete from an excavated surface decreases the safety of the tunnel. Meanwhile, the bonding state of shotcrete is affected by blasting during excavation at tunnel face as well as bench cut. Generally, the bonding state of shotcrete can be classified as void, de-bonded, or fully bonded. In this study, the state of the back-surface of shotcrete is investigated using impact-echo (IE) techniques. Numerical simulation of IE technique is performed with ABAQUS. Signals obtained from the IE simulations were analyzed at time, frequency, and time-frequency domains, respectively. Using an integrated active signal processing technique coupled with a Short-Time Fourier Transform (STFT) analysis, the bonding state of the shotcrete can be evaluated accurately. As the bonding state worsens, the amplitude of the first peak past the maximum amplitude in the time domain waveform and the maximum energy of the autospectral density are increasing. The resonance frequency becomes detectable and calculable and the contour in time-frequency domain has a long tail parallel to the time axis. Signal characteristics with respect to ground condition were obtained in case of fully bonded condition. As the ground condition worsens, the length of a long tail parallel to the time axis is lengthened and the contour is located in low frequency range under 10 kHz.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.387-396
• /
• 2009

The life and performance of lithium battery are greatly influenced by the formation process which is essential in the process of manufacture. Charge/discharge system for the lithium battery are required for the formation process. To simulate such a system in a conventional method takes very long time and requires huge memory space to save data files. So the simulation may be impossible with a general-purpose PC. In this paper, the lithium battery is modelled to a resistor-capacitor serial circuit and the lithium battery charge/discharge system is analyzed and simulated by using state space averaging method. As a result, the simulation time is reduced dramatically and the simulation of the lithium battery charge/discharge system becomes possible on a general-purpose PC within 3 hours. Also, both the charge/discharge characteristics and the time required to charge/discharge of the lithium battery charge/discharge system can be observed. To verify the propriety of resistor-capacitor serial circuit modeling method for lithium battery and the validity of the analysis and simulation based on state space averaging, the lithium battery charge/discharge system is composed and experimentations are carried out.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.69-76
• /
• 2006

Cable dome is one of tension structure which is gradually stabilized by tensioning tables from initially unstable state to finally stable state. This stabilizing process is not able to be developed by general analysis because some cables endure compression forces during stabilizing process. Thus, this paper uses dynamic relaxation method to solve this problem. To apply this stabilizing process analysis to the actual project, this paper deals with cable dome roof of Seoul Olympic Gymnasium. Finally, this paper prove the usefulness of stabilizing process analysis by comparing the analysis results and the measurements.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.24-30
• /
• 2002

본 글에서는 정밀 전자 소자등을 극저온으로 냉동시키는 데 필요불가결한 극저온 단열 기술에 대하여 간단히 알아보았다. 역사가 가장 오래되고 기본적인 진공 단열 기술로 시작하여, 공간에 고형의 물질을 삽입하는 다층 단열 기술과 분말 단열 기술에 대하여 토의하였다. 실제 응용시에는 요구되는 열적 성능과 경제적 제한 조건을 고려하여 가장 적합한 단열 방법을 선정하도록 하여야한다 또한 극저온 단열 용기의 실제 열해석 예로서 적외선 센서의 극저온 용기에 대한 정상 및 과도 열전달 해석에 대하여 간단히 기술하였다. 정상상태의 경우는 많은 경우 해석적인 해를 구할 수 있지만, 시간에 따라 온도가 변하는 과도 상태의 경우는 수치해석적인 방법이 요구된다. 열해석에서 일반적으로 쓰이는 유한차분법이 극저온 단열 용기의 열해석에도 유용하게 쓰일 수 있음을 보였다.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.3
• /
• pp.85-93
• /
• 2011

Membrane materials are very flexible, thus wrinkling, uniaxial state, can be occurred. The wrinkling are due to lots of various factors as eccentric force, construction errors, and fabrication errors. These wrinkled membrane elements are in status of uniaxial stress. In the paper, a method which be able to check the wrinkling is proposed. The stress-deformation analysis of membrane structures for given external load will be carried out, and here the membrane elements are regarded as wrinkled state if the principal stress 2 is smaller than 0. With proposed method, two existed construction examples, Suwon auditorium and Okinawa 75 Expo, are analyzed.

• Proceedings of the KIEE Conference
• /
• 1984.07a
• /
• pp.38-40
• /
• 1984

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.459-461
• /
• 2006

저궤도 인공위성 전력계 시스템의 설계 및 해석을 위한 태양 전지 전력조절기의 대신호 안정도해석을 수행한다. 태양전지 전력조절기에서 제어가능한 모든 방법에 따른 태양전지에서 바라본 태양전지 전력조절기의 부하특성을 분류하고, 상태공간해석을 이용하여 태양전지 시스템의 대신호적 안정도를 해석한다. 또한, 본 논문에서는 태양전지 전력조절기의 부하특성을 정전력부하에서 정저항부하로 변환하여 대신호적인 안정도를 확보하는 비선형변환을 제안한다. 제안된 변환기법을 통해 최대전력점 추적제어나 배터리 충전제어 및 전류분배제어가 가능한 병렬 모듈 태양전지 레귤레이터에 적합한 단일 전류 제어기를 구성한다. 제안된 대신호 해석과 저항제어를 검증하기위해, 200W급 태양전지와 100W급 태양전지 전력조절기 두 모듈을 병렬로 구성하여 실험하였다.