• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.162-166
• /
• 2012

V-I characteristics of Fe(100)/MgO(100)/Cu-phthalocyanine (CuPc)/Co hybrid magnetic tunnel junctions were investigated at different temperatures. Fe(100) and Co ferromagnetic layers were separated by an organic-inorganic hybrid barrier consisting of different thickness of CuPc thin film grown on a 2 nm thick epitaxial MgO(100) layer. As the CuPc thickness increases from 0 to 10 nm, a bistable switching behavior due to strong charging effects was observed, while a very large magenetoresistance was shown at 77 K for the junctions without the CuPc barrier. This switching behavior decreases with the increase in temperature, and finally disappears beyond 240 K. In this work, high-potential future applications of the MgO(100)/CuPc bilayer were discussed for hybrid spintronic devices as well as polymer random access memories (PoRAMs).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.27-27
• /
• 2010

최근에 고유가와 지구온난화로 인하여 에너지가 향후 인류의 50년을 좌우할 가장 큰 문제로 대두되고 있어서 지구의 모든 에너지의 근원인 태양광을 이용하는 태양광 발전은 무한한 청정 에너지로 각광받고 있다. 빛을 흡수하여 전기에너지로 변환하는 태양전지는 풍력, 수소연료전지, 조력, 바이오에탄올 등의 신재생에너지 기술 중에서 상품성은 가장 뛰어나지만 발전단가가 가장 높은 것이 단점이다. 태양광 발전단가를 줄여서 기존의 화석에너지를 이용한 발전단가와 견줄 수 있는 그리드 패러티(grid parity)를 달성하려면 태양전지 모듈의 고효율화와 동시에 저가화가 반드시 이루어져야 한다. 현재 태양광 모듈 시장의 90%는 효율이 12-16% 정도로 높은 단결정(single crystalline or monocrystalline) 실리콘이나 다결정(polycrystalline or multicrystalline) 실리콘 등의 벌크(bulk)형 결정질 실리콘 모듈이 차지하고 있으나 원재료인 실리콘 웨이퍼의 제조단가의 50%를 차지하고 있어서 저가화가 어렵다. 반면, 원료가스를 분해하여 대면적 기판에 증착하는 박막(thin-film) 실리콘 태양전지의 경우는 차세대 태양전지로 각광받고 있다. 박막 실리콘 모듈은 매우 적은 실리콘 원재료를 소비한다. 단결정이나 다결정 실리콘 웨이퍼의 두께가 $180-250\;{\mu}m$ 정도인 것에 비해서 박막 실리콘의 두께는 $0.3-3\;{\mu}m$ 수준이다. 더불어, 유리, 플라스틱 등의 저가 기판에 저온 대면적 증착이 가능하여 저가양산화에 유리하다. 박막 실리콘 모듈은 벌크형 실리콘 모듈(-0.5%/K) 대비 낮은 온도계수[비정질 실리콘(amorphous silicon; a-Si:H)의 경우 -0.2%/K]와 빛의 세기가 약한 산란광에서도 동작하여 평균발전시간이 증가하므로 외부환경에서 우수한 발전성능을 보이고 있다. 태양전지 모듈은 상온에서의 안정화 효율을 기준으로 가격이 책정되어($/$W_p$) 판매되기 때문에 벌크형 실리콘 모듈에 비해서 박막 실리콘 모듈은 가격대 성능비가 우수하다. 따라서 박막 실리콘 모듈은 벌크형 결정 실리콘 모듈의 대안으로 떠오르고 있으며, 레이저 기술을 이용하여 수려한 투광형 건물일체형(building integrated photovoltaic; BIPV) 모듈을 제작할 수 있는 장점도 있다. 이러한 장점에도 불구하고 기존의 양산화된 단일접합 비정질 실리콘 태양광 모듈은 효율이 6-7%로 낮아서 설치면적 및 설치 모듈의 증가가 성장의 걸림돌이 되고 있다. 박막 실리콘 태양전지의 고효율화를 도모하기 위해서 적층형 탄뎀셀로 양산 트렌드가 변화하고 있다. 이에 적층형 박막 실리콘 태양전지 효율의 한계 및 돌파구에 대해서 논의한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.231-231
• /
• 2013

ZnO은 hexagonal wurtzite 구조를 갖는 직접 천이형 화합물 반도체로서, 상온에서 3.37 eV 정도의 wide band gap energy를 가지고 있으며, 60 meV의 큰 엑시톤 결합 에너지(exciton binding energy)를 갖는다. 또한 동종 기판이 존재하고 열, 화학적으로 안정한 상태이며 습식 식각이 가능한 장점으로 인해 각광받고 있다. 또한, ZnO 박막은 우수한 전기 전도성을 나타내며 광학적 투명도가 우수하기 때문에 투명전극으로 많이 이용되어 왔고, 태양 전지(solar cell), 가스 센서, 압전소자 등 많은 분야에서 사용되고 있다. 이와 같은 ZnO박막을 안정적인 쇼트키 다이오드 특성을 얻기 위해서는 쇼트키 배리어 장벽의 형성이 필수적이다. Mg을 ZnO에 첨가하여 MgZnO 박막을 형성할 경우, 금속의 일함수와 MgZnO의 전자친화력 차이가 증가하여 더 큰 쇼트키 장벽 형성이 가능하며, 금속의 일함수가 큰 물질을 사용해야 한다. 또한, 박막의 결함이 적은 박막을 형성해야 하는 에피탁셜 박막이 필요하다. SiC는 높은 포화 전자 드리프트 속도(${\sim}2.7{\times}107$ cm/s), 높은 절연 파괴전압(~3 MV/cm)과 높은 열전도율(~5.0W/cm) 특징을 가지고 있으며, MgZnO/Al2O3의 격자 불일치는 ~19%인 반면에 MgZnO/SiC의 격자 불일치는 ~6%를 가진다. 금속의 일함수가 큰 Ag 금속은 열처리가 될 경우 AgOx가 될 경우 더욱 안정적인 쇼트키 장벽을 형성될 수 있을 것으로 판단된다. 본 연구에서는 쇼트키 접합을 형성하기 위해 금속의 일함수가 큰 Ag 금속을 사용하였으며, Al2O3 기판과 6H-SiC 기판위에 MgZnO(30 at.%) 박막을 증착하였다. 증착 후에 Ag를 증착 한 뒤 급속 열처리를 하였다. 열처리된 MgZnO의 경우 열처리 하지않은 소자보다 약 $10^5$ 이상의 우수한 on/off 특성을 보였다.

• Composites Research
• /
• v.19 no.4
• /
• pp.23-30
• /
• 2006

In the development of a cryogenic propellant tank, the proper selection of adhesives to bond composite and metal liner is important for the safety of operation. In this study, 3 types of adhesives were tested for the ability to bond CFRP composites developed for cryogenic use and aluminum alloy (Al 6061-T6) for lining the tank using double-lap joint specimens. The double-lap joint specimens were tested inside an environmental chamber at room temperature and cryogenic temperature ($-150^{\circ}C$) respectively to compare the bond strength of each adhesive and fracture characteristics. The material properties with temperature of component materials of double-lap joints were measured. In addition, ABAQUS was used for the purpose of analyzing the experimental results.

• Composites Research
• /
• v.33 no.5
• /
• pp.275-281
• /
• 2020

The mechanical property related to lap shear strength of the joint structure between carbon fiber reinforced polymer (CFRP) composite and metal (Ni-Cr Alloy) under varying environmental conditions (temperature and humidity) was studied in order to apply to the aircraft fan blade. Room temperature dry (RTD), elevated temperature wet (ETW), and cold temperature dry (CTD) environmental conditions were chosen for investigation based on the flight conditions of aircraft. Lap shear strength tests were conducted according to ASTM Standard D3528 to evaluate the shear strength. The microstructure characteristic of failure zone was analyzed by SEM images to check the adhesive shear strength with the three environmental conditions. In comparison with shear strength for the RTD condition, the shear strength in the ETW condition was reduced by 72.8% while those for the CTD condition increased by 56.5%. The moisture absorption and high temperature in ETW condition strongly had an affect on mechanical property of adhesive, while cold temperature could enhance the adhesive shear strength due to the higher brittleness.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.153-159
• /
• 2007

In-cryostat helium lines are under installation to transfer a cryogenic helium into cold components in KSTAR device. In KSTAR, three kinds of helium should be supplied into the cold components, which are supercritical helium Into superconduction(SC) magnet system, liquid helium into current lead system, and gas helium into thermal shields. Cryogenic helium lines consist of transfer lines outside the cryostat, in-cryostat helium lines, and electrical breaks. In-cryostat helium lines should be guaranteed of leak tightness for tong time operation at high internal helium pressure of 20 bar. We wrapped the helium line with multi-layer insulator(MLI) to reduce radiation heat and insulated the surface of the high potential part with prepreg tape. The electrical break was fabricated by brazing ceramic tube with stainless steel tube. To ensure the operation reliability at operation temperature, all the electrical break have been examined by the thermal cycle test at liquid nitrogen and by the hydraulic test at 30 bar. And additional surface insulation was prepared with prepreg tape to give structural safety. At present most of the in-cryostat helium lines have been installed and the final inspection test is progressing.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.329-334
• /
• 2009

This study is to develop a fuel cell system applicable to an in situ NMR (Nuclear magnetic resonance) diagnosis. The in situ NMR can be used in real time monitoring of various reactions occurring in the fuel cell, such as oxidation of fuel, reduction of oxygen, transport phenomena, and component degradation. The fuel cell for this purpose is, however, to be operated in a specifically designed tubular shape toroid cavity detector (TCD), which constrains the fuel cell to have a tubular shape. This may cause difficulties in effective mass transport of reactants/products and uniform distribution of assembly pressure. Therefore, a new flow field designed in a particular way is necessary to enhance the mass transport in the tubular fuel cell. In this study, a tubular-shaped close-type flow field made of non-magnetic material is developed. With this flow field, oxygen is effectively delivered to the cathode surface and the produced water is readily removed from the membrane-electrode assembly to prevent flooding. The resulting DMFC (direct methanol fuel cell) outperforms the open-type flow field and exhibits $36\;mW/cm^2$ even at room temperature.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.99-104
• /
• 2004

We have studied to understand the barrier and interface qualities and structural changes through measuring temperature dependent spin-polarization as functions of plasma oxidation time and annealing time. Magnetic tunnel junctions consisting of SiO2$_2$/Ta 5/CoFe 17/IrMn 7.5/CoFe 5/Al 1.6-Ox/CoFe 5/Ta 5 (numbers in nm) were deposited and annealed when necessary. A 30 s,40 s oxidized sample showed the lowest spin-polarization values. It is presumed that tunneling electrons were depolarized and scattered by residual paramagnetic Al due to under-oxidation. On the contrary, a 60s, 70 s oxidized sample might have experienced over-oxidation, where partially oxidized magnetic dead layer was formed on top of the bottom CoFe electrode. The magnetic dead layer is known to increase the probability of spin-flip scattering. Therefore it showed a higher temperature dependence than that of the optimum sample (50 s oxidation). temperature dependence of 450 K annealed samples was improved when the as-deposited one compared. But the sample underwent 475 K and 500 K annealing exhibits inferior temperature dependence of spin-polarization, indicating that the over-annealed sample became microstucturally degraded.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.111-116
• /
• 2011

The characteristics of natural resin, sap of the lacquer tree were examined as an adhesive for the ceramic conservation since it has such outstanding properties like corrosion resistance against acid and alkali, heat-resistance, waterproof, antiseptic and protection against insects. In order to utilize raw lacquer as an adhesive not under the hardening conditions of lacquer like high humidity (RH 75 to 85%) and high temperature (120 to $170^{\circ}C$), but under normal condition, isinglass and animal glue were added to raw lacquer at certain ratio. In addition, the viscosity and the drying time were measured and their possibilities of application were also investigated through measurement of tensile and adhesive strength. As a result of experiment, it was possible to dry at room temperature and RH $50{\pm}5%$ to mix with raw lacquer and glue, and the drying time of sample with animal glue was faster than that of isinglass. Furthermore, the adhesion of sample with glue was increased more than raw lacquer. It seems to be possible to use the environmental friendly traditional adhesive for the ceramic conservation and restoration, if there are studies or examinations of safety of applications on objects and weathering resistance.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2003

Surface finishes of PCB laminates are important in the solder joint reliability of flip chip package because the types and thicknesses of intermetallic compound(IMC), and compositions and hardness of solders are affected by them. In this study, effects of surface finishes of PCB on the low cycle fatigue resistance of Sn-based lead-free solders; Sn-3.5Ag, Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag-XBi(X=2.5, 7.5) and Sn-0.7Cu were investigated for the Cu and Au/Ni surface finish treatments. Displacement controlled room temperature lap shear fatigue tests showed that fatigue resistance of Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag and Sn-0.7Cu alloys were more or less the same each other but much better than that of Bi containing alloys regardless of the surface finish layer used. In general, solder joints on the Au/Ni finish showed better fatigue resistance than those on the Cu finish. Cross-sectional fractography revealed microcracks nucleation inside of the interfacial IMC near the solder mask edge, more frequently on the Cu than the Au/Ni surface finish. Macro cracks followed the solder/IMC interface in the Bi containing alloys, while they propagated in the solder matrix in other alloys. It was ascribed to the Bi segregation at the solder/IMC interface and the solid solution hardening effect of Bi in the $\beta-Sn$ matrix.