• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.101-109
• /
• 2022

The mobility and transport of radioactive cesium are crucial factors to consider for the safety assessment of high-level radioactive waste disposal sites in granite. The retardation of radionuclides in the fractured crystalline rock is mainly controlled by the hydrochemical condition of groundwater and surface reactions with minerals present in the fractures. This paper reports the experimental results of cesium sorption to the Wonju Granite, a typical Mesozoic granite in Korea, performed in an anaerobic chamber that mimics the anoxic environment of a deep disposal site. We measured the rates and amounts of cesium (¹³³Cs) removed by crushed granite samples in different electrolyte (NaCl, KCl, and CaCl₂) solutions and a synthetic groundwater solution, with variations in the initial cesium concentration (10^-5, 5×10^-6, 10^-6, 5×10^-7 M). The cesium sorption kinetic and isotherm data were successfully simulated by the pseudo-second-order kinetic model (r²= 0.99) and the Freundlich isotherm model (r²= 0.99), respectively. The sorption distribution coefficient of granite increased almost linearly with increasing biotite content in granite samples, indicating that biotite is an effective cesium scavenger. The cesium removal was minimal in KCl solution compared to that in NaCl or CaCl₂ solution, regardless of the ionic strength and initial cesium concentration that we examined, showing that K⁺ is the most competitive ion against cesium in sorption to granite. Because it is the main source mineral of K⁺ in fracture fluids, biotite may also hinder the sorption of cesium, which warrants further research.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.226-240
• /
• 2022

Local governments over a certain size in Republic of Korea may conduct Environmental Impact Assessment (EIA) considering regional characteristics if it is necessary, in accordance with Article 42 of the 「Environmental Impact Assessment Act」. However, it was investigated that the number of local government EIA operation in many local governments was less than initial expectations. In order to improve it, the status of ordinances and consultation guidelines which are different for each local government need to be compared, and the institutional issues forthe relevant local governments must be found considering regional characteristics. Furthermore, detailed regulation and guidance on the local government EIA procedure should be included in the consultation guidelines and related information need to be provided. In this study, focusing on the case of Incheon Metropolitan City, the status of local government EIA ordinances in metropolitan cities and provinces with a similar condition was investigated, and the types and scope of target projects were compared and analyzed. In addition, consultation guidelines forIncheon Metropolitan City were written, and improvements on the procedure flow and overall schedule designation derived from the process were presented. In the case of Incheon Metropolitan City, there were no detailed information officially announced regarding the regulations of the local government EIA ordinance and follow-up management, so the administrative system of the local government needed to be reinforced in this field. Meanwhile, considering the status of local environment and geography, some target project types were deemed necessary to be added: port construction projects, water resource development projects, railroad construction projects, and military facilities installation projects. The results of this study will provide useful information to local governments which want to improve their operation effectiveness by reorganizing the local government EIA system and preparing specific guidelines.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.273-280
• /
• 2022

Based on the MOU between Chosun University and Daegu University, this study was conducted with the aim of exploring the operation strategy of a extracurricular education program on the theme of lifelong education for the disabled in community connection. In front-line university sites, extracurricular education programs are often recognized as forms and procedures to assist in subject learning at the major or liberal arts level, but they have a very important status and identity considering that they are classified as "learning competency reinforcement support", "career psychological counseling support", "employment and start-up support", "subject-linked extracurricular education". Accordingly, the extracurricular education programs has the nature and advantage of covering not only the level of the one-time trend program itself, but also various community -linked problem-solving learning, including students' major learning and employment linkage. As part of the above, this study aims to present a strategy for the operation of a extracurricular education programs with the main theme and content of "lifelong education for the disabled" by viewing Chosun University and Daegu University. The contents of the study were largely presented as "organizational operation strategy between two universities," "operation strategy of curriculum between two universities," and "comprehensive system for extracurricular education programs operation of lifelong education for the disabled between the two universities". First, the first research content, "Organized Operation Strategy between Two Universities," was schematized in detail the process of collaborating and communicating with Chosun University's center of extracurricular activities, Daegu University Lifelong Education Center, and other committees and departments. The second research content, "The Curriculum Operation Strategy between Two Universities", is a detailed schematic diagram of the learning contents, methods, and procedures to be organized in the extracurricular education program. The third study, "Comprehensive System of extracurricular education program Operation for Lifelong Education for the Disabled between Two Universities," presents the results of synthesizing the basis elements essential for operating the extracurricular education program at the level of a roadmap. As a result of the study, it was possible to see the project tasks that could be promoted in-depth through the operation of a extracurricular education program on lifelong education for the disabled through the MOU between the two universities.

• Journal of Ginseng Culture
• /
• v.4
• /
• pp.103-127
• /
• 2022

The influx of modern culture in the early 20th century in Korea led to numerous changes in the country's ginseng industry. With the development of ginseng cultivation technology and commerce, the production and consumption of ginseng increased, and various ginseng products were developed using modern manufacturing technology. Consequently, competition for the sales of these products became fierce. At that time, newspaper advertisements showed detailed trends in the development and sales competition of ginseng products. Before 1920, however, there were few advertisements of ginseng in newspapers. This is thought to be because newspapers had not yet been generalized, and the ginseng industry had not developed that much. Ginseng advertisements started to revitalize in the early 1920s after the launch of the Korean daily newspapers Dong-A Ilbo and Chosun Ilbo. Such advertisements in this period focused on emphasizing the traditional efficacy of Oriental medicine and the mysterious effects of ginseng. There were many advertisements for products that prescribed the combination of ginseng and deer antler, indicating the great popularity of this prescription at the time. Furthermore, advertisements showed many personal experience stories about taking such products. Mail order and telemarketing sales were already widely used in the 1920s . In 1925, there were advertisements that ginseng products were delivered every day. The advertisements revealed that ginseng roots were classified more elaborately than they are now according to size and quality. Ginseng products in the 1920s did not deviate significantly from the scope of traditional Oriental medicine formulations such as liquid medicine, pill, and concentrated extract. In the 1930s, ginseng advertisements became more active. At this time, experts such as university professors and doctors in medicine or in pharmacy appeared in the advertisements. They recommended ginseng products or explained the ingredients and medicinal effects of the products. Even their experimental notes based on scientific research results appeared in the advertisements to enhance the reliability of the ginseng products. In 1931, modern tablet advertisements appeared. Ginseng products supplemented with vitamins and other specific ingredients as well as ginseng thin rice gruel for the sick appeared at this time. In 1938, ginseng advertisements became more popular, and advertisements using talents as models, such as dancer Choi Seunghee or famous movie stars, models appeared. Ginseng advertisements in the 1920s and 1930s clearly show a side of our rapidly changing society at the time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.3
• /
• pp.164-178
• /
• 2022

Uncertainties in weather forecasts would affect the reliability of yield prediction using crop models. The objective of this study was to compare uncertainty in crop yield prediction caused by the use of the weather forecast data. Daily weather data were produced at 10 km spatial resolution using W eather Research and Forecasting (W RF) model. The nearest neighbor method was used to downscale these data at the resolution of 5 km (W RF5K). Parameter-elevation Regressions on Independent Slopes Model (PRISM) was also applied to the WRF data to produce the weather data at the same resolution. W RF5K and PRISM data were used as inputs to the CROPGRO-SOYBEAN model to predict crop yield. The uncertainties of the gridded data were analyzed using cumulative growing degree days (CGDD) and cumulative solar radiation (CSRAD) during the soybean growing seasons for the crop of interest. The degree of agreement (DOA) statistics including structural similarity index were determined for the crop model outputs. Our results indicated that the DOA statistics for CGDD were correlated with that for the maturity dates predicted using WRF5K and PRISM data. Yield forecasts had small values of the DOA statistics when large spatial disagreement occured between maturity dates predicted using WRF5K and PRISM. These results suggest that the spatial uncertainties in temperature data would affect the reliability of the phenology and, as a result, yield predictions at a greater degree than those in solar radiation data. This merits further studies to assess the uncertainties of crop yield forecasts using a wide range of crop calendars.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.271-283
• /
• 2021

The Imjingang Belt in the middle-western Korean Peninsula has tectonically been correlated with the Permo-Triassic Qinling-Dabie-Sulu collisional belt between the North and South China cratons in terms of collisional tectonics. Within the belt, crustal-scale extensional ductile shear zones that were interpreted to be formed during collapsing stage with thrusts and folds were reported as evidence of collisional events by previous studies. In this study, we tried to understand the nature of deformation along the southern boundary of the belt in the Munsan area based on the interpretations of recently conducted structural analyses. To figure out the realistic geometry of the study area, the down-plunge projection was carried out based on the geometric relationships between structural elements from the detailed field investigation. We also conducted kinematic interpretations based on the observed shear sense indicators from the outcrops and the oriented thin-sections made from the mylonite samples. The prominent structures of the Munsan area are the regional-scale ENE-WSW striking thrust and the N-S trending map-scale folds, both in its hanging wall and footwall areas. Shear sense indicators suggest both eastward and westward vergence, showing opposite directions on each limb of the map-scale folds in the Munsan area. In addition, observed deformed microstructures from the biotite gneiss and the metasyenite of the Munsan area suggest that their deformation conditions are corresponding to the typical mid-crustal plastic deformation of the quartzofeldspathic metamorphic rocks. These microstructural results combined with the macro-scale structural interpretations suggest that the shear zones preserved in the Munsan area is mostly related to the development of the N-S trending map-scale folds that might be formed by flexural folding rather than the previously reported E-W trending crustal-scale extensional ductile shear zone by Permo-Triassic collision. These detailed examinations of the structures preserved in the Imjingang Belt can further contribute to solving the tectonic enigma of the Korean collisional orogen.

• Journal of Popular Narrative
• /
• v.26 no.4
• /
• pp.77-114
• /
• 2020

This article aims to examine the Sinpa of Along With the Gods: The Two Worlds. Along with the Gods: The Two Worlds was a box office hit with a 10 million attendance mark, but it was also criticized as a 'Korean Sinpa' at the time of its release. The original version of Along with the Gods is a Webtoon called Singwahamkke in Korean. The popularity of Singwahamkke and its adaptation, Along with the Gods was enormous, which prompted a very active research to be carried about the work. However there are only a few articles which analyze the Along with the Gods: The Two Worlds focusing on the Sinpa, even though the Sinpa of the Along with the Gods: The Two Worlds was a highly controversial issue when the movie was released. In this regard, this article tries to examine the Sinpa of the Along with the Gods: The Two Worlds closely, especially by comparing it with the original webtoon Singwahamkke Jeoseung. The body part of this article is composed of three major parts: chapters 2, 3, and 4. Chapter 2 contains an in depth explanation about the notion of Sinpa, the main conceptual research tool for this study. In chapter 3, the original webtoon Singwahamkke Jeoseung is examined closely. This chapter analyzes the 'Sinpajeok moment' in Singwahamkke Jeoseung and argues that despite the presence of Sinpa elements, the webtoon cannot be considered a 'Sinpajeok text'. On the other hand the main subject of chapter 4 is discovering what effect the adaptation from webtoon to movie had on this work, with a particular focus on the gender of Sinpa and Kim Ja-hong. Chapter 5, which corresponds to the conclusion, briefly evaluates the social significance of the controversy arisen in South Korea about the Sinpa in Along with the Gods: The Two Worlds. Sinpa is one of the most repeated code in the realm of Korean popular narrative. This is why the Sinpa of contemporary text is examined continuously even though there are already plenty of studies on the Sinpa. Everyone has called Along with the Gods: The Two Worlds Sinpa but no one has properly analyzed it. It is hoped that this article which closesly examined the Sinpa in Along with the Gods: The Two Worlds contribute to the field of Sinpa. It is also expected that this article can find appropriate contextual meaning of the series of Along with the Gods.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.99-110
• /
• 2023

Non-point source (NP) pollutants in an agricultural landuse are discharged from a large area compared to those in other land uses, and thus effective source control measures are needed. To develop appropriate control measures, it is necessary to quantify discharge load of each source and evaluate the degree of water quality improvement by implementing different options of the control measures. This study used Hydrological Simulation Program-FORTRAN (HSPF) to quantify pollutant discharge loads from different sources and effects of different control measures on water quality improvements, thereby supporting decision making in developing appropirate pollutant control strategies. The study area is the Gyeseong river watershed in Changnyeong county, Gyeongsangnam-do, with agricultural areas occupying the largest proportion (26.13%) of the total area except for the forest area. The main pollutant sources include chemical and liquid fertilizers for agricultural activities, and manure produced from small scale livestock facilities and applied to agriculture lands or stacked near the facilities. Source loads of chemical fertilizers, liquid fertilizers and livestock manure of small scale livestock facilities, and point sources such as municipal wastewater treatment plants (WWTPs), community WWTPs, private sewage treament plants were considered in the HSPF model setup. Especially, NITR and PHOS modules were used to simulate detailed fate and transport processes including vegitation uptake, nutrient deposition, adsorption/desorption, and loss by deep percolation. The HSPF model was calibrated and validated based on the observed data from 2015 to 2020 at the outlet of the watershed. The calibrated model showed reasonably good performance in simulating the flow and water quality. Five Pollutants control scenarios were established from three sectors: agriculture pollution management (drainge outlet control, and replacement of controlled release fertilizers), livestock pollution management (liquid fertilizer reduction, and 'manure management of small scale livestock facilities) and private STP management. Each pollutant control measure was further divided into short-term, mid-term, and long-term scenarios based on the potential achievement period. The simulation results showed that the most effective control measure is the replacement of controlled release fertilizers followed by the drainge outlet control and the manure management of small scale livestock facilities. Furthermore, the simulation showed that application of all the control measures in the entire watershed can decrease the annual TN and TP loads at the outlet by 40.6% and 41.1%, respectively, and the annual average concentrations of TN and TP at the outlet by 35.1% and 29.2%, respectively. This study supports decision makers in priotizing different pollutant control measures based on their predicted performance on the water quality improvements in an agriculturally dominated watershed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.15-25
• /
• 2023

In this study, silicon sludge from semiconductor dicing process is recycled to fabricate silica nanoparticles, which are applied as dispersing materials for electro-responsive (ER) smart fluid. In specific, metal impurities are removed from silicon sludge by acid washing to obtain the high-purity silicon powder. And then, silica nanoparticles are synthesized by facile hydrothermal method employing the silicon powder as reactant material. To control the size of silica nanoparticles, the reaction time of hydrothermal method is varied as 8, 15, 20, and 30 hours are applied to control the size of silica nanoparticles. Sizes of silica nanoparticles are increased proportionally to the reaction time owing to the increased numbers of hydrolysis and condensation reactions. As-synthesized silica nanoparticles are prepared as electro-responsive smart fluids by dispersing into silicon oil. Silica nanoparticles synthesized by 30 hours of hydrothermal reaction (SiO₂-H30) exhibit the highest shear stress of 21.4 Pa under an applied electric field strength of 3.0kV mm^-1. Such enhancement in ER performance of SiO₂-H30 among various silica nanoparticles are attribute to the reinforcing effect originated from the mixed particle size, which allowing the formation of rigid chain-like structures. Accordingly, this study successfully propose a recycling method of silicon sludge to synthesize silica nanoparticles and their derived ER fluids, which may suggest new possibility to ESG management emphasizing the eco-friendliness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.479-487
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing owing to global warming. In a situation where the installation of floating wind turbines is increasing worldwide, concerns about the huge loss and collapse of floating offshore wind turbines owing to strong typhoons are deepening. A new type of disconnectable mooring system must be developed for the safe operation of floating offshore wind turbines. A new submersible mooring pulley considered in this study is devised to more easily attach or detach the floating of shore wind turbine with mooring lines compared with other disconnectable mooring apparatuses. To investigate the structural safety of the initial design of submersible mooring pulley that can be applied to an 8MW-class floating type offshore wind turbine, scale-down structural models were developed using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by conducting the tensile tests. The finite element analysis (FEA) of submersible mooring pulley was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the FEA, the structural weak parts on the submersible mooring pulley were reviewed. The structural model tests were conducted considering the main load conditions of submersible mooring pulley, and the FEA and test results were compared for the locations that exceeded the maximum tensile stress of the material. The results of the FEA and structural model tests indicated that the connection structure of the body and the wheel was weak in operating conditions and that of the body and the chain stopper was weak in mooring conditions. The results of this study enabled to experimentally verify the structural safety of the initial design of submersible mooring pulley. The study results can be usefully used to improve the structural strength of submersible mooring pulley in a detailed design stage.