• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.58-64
• /
• 1992

TCR modifying oxides which have negative TCR were added to the $\textrm{RuO}_2$ thick film resistors and how they affect the TCR and resistivity of the systems were investigated. Two types of resistor systems whose ratio of $\textrm{RuO}_2$ to glass were 20/80 and 12/88 were used as standard resistors. It was observed that the modifiers did not always lower the TCR of the resistors and the direction of the TCR change were different from system to system. It was confirmed, however, that the feasibility of optimization of TCR of the resistors. When more than two TCR modifiers were added simultaneously there was no interaction between them. The resultant TCR of the resistor wart just sum of the effects from individual modifier. It was found to be desirable that the amount of addition of the TCR modifiers should be less than 2 to 3 percent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.167.2-167.2
• /
• 2015

고 이동도(~10 cm/Vs), 낮은 공정온도 및 높은 투과율 등의 특성을 갖는 산화물 반도체는 저 소비전력, 대면적화 및 고해상도 LCD Panel에 적합한 재료로서 현재 일부 Mobile Panel 및 TFT-LCD Panel의 양산에 적용되고 있으나, 향후 UHD급(4 K, 8 K)의 대형, 고해상도 Panel에의 적용을 위해서는 30 cm2/Vs 이상의 고 이동도 재료의 개발 및 저 저항 배선의 적용에 따른 소자 신뢰성의 개선이 필요하다. Cu는 대표적인 저 저항 배선 재료로 일부 양산에 적용되고 있으나, Cu 전극과 산화물 반도체의 계면에서 Cu원자의 확산 및 Cu-O 층의 형성에 의한 소자 특성 저하의 문제가 있다. 본 연구에서는 고 이동도의 In doped-ZTO계 산화물 반도체를 기반으로 채널 층과 Cu source-Drain layer의 계면에서의 Cu element의 거동 및 TFT 소자 특성과의 상관관계를 고찰하고, 계면에 형성된 Cu-O layer에 대해 높은 전자 친화도를 갖는 Ca element를 첨가에 의한 TFT 소자 특성의 변화를 관찰하였다. 본 연구에서는 이러한 효과로 인한 소자 신뢰성의 향상을 기대하였으며, 우선 In doped-ZTO 채널 층에 Cu와 CuCa 2at% source-drain을 적용한 TFT 특성을 확인하였다. 그 결과, Cu는 Field-effect mobility: ~17.67 cm2/Vs, Sub-threshold swing: 0.76 mV/decade 및 Vth:, 4.40 V의 결과가 얻어졌으며 CuCa 2at%의 경우 Field-effect mobility: ~17.84 cm2/Vs, Sub-threshold swing: 0.86 mV/decade 및 Vth:, 5.74 V의 결과가 얻어졌다. 소자신뢰성 측면에서도 Bias Stress의 변화량 ${\delta}Vth$의 경우 Cu : 4.48 V에 대해 CuCa 2at% : 2.81 V로 ${\delta}Vth$:1.67 V의 개선된 결과를 얻었다.

• Korean Journal of Food Science and Technology
• /
• v.40 no.6
• /
• pp.712-716
• /
• 2008

In an effort to evaluate Salmonella food safety using combinations of preservation techniques, its viabilities when exposed to HCl, acetic acid, and the oxidative agents (hydrogen peroxide and butyl hydrogen peroxide), were analyzed using sub-lethal heat-shocked Salmonella Typhimurium at $56^{\circ}C$. 2D gel electrophoresis and MALDI-TOF MS analyses were also conducted to determine the expression and repression of proteins in heat-shocked cells. Heat-shocked S. Typhimurium evidenced a reduction of viable counts by 1-2 log CFU/mL. However, viality of non heat-shocked S. Typhimurium decreased markedly by 5-6 log CFU/mL at a pH 4 in response to acid and oxidative stresses. Sub-lethal heat treatment greatly increased the resistance of S. Typhimurium against acid and oxidant agents. As for 2D gel electrophoresis and protein identification via MALDI-TOF MS, 17 major proteins in non heat-shocked S. Typhimurium were detected, and only 13 proteins among these proteins were detected in heat-shocked S. Typhimurium. The heat shock proteins such as DnaK and small heat shock proteins were included, and may be associated with the resistance of S. typhimurium against exposure to acids and oxidants. Therefore, even though the promising hurdle technology using the combined mild treatments including heat was applied to S. Typhimurium, the proper heat treatment to reduce its crossprotection activity toward the following preservative agents might be considered.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.391-398
• /
• 2009

The purpose of this study was to investigate the effects of aerobic exercise(folk dance) with resistance exercise(elastic band) for 12 weeks on blood MDA concentration and SOD GPx activities in the elderly women. The subjects consisted 12 elderly women between 65-75 years exercise were folk dance(HRmax 50-60% levels, 60min, two per a week) and elastic band(yellow band, 60min, two per a week) program for 12 weeks. SOD, GPx activities in the before combined exercise were significantly increased than that in after combined exercise. These results show that aerobic exercise with resistance exercise program in considered to contribute enforced of antioxidant enzyme system by increased SOD and GPx activities in elderly women.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.567-573
• /
• 2012

Compared with the natural marble, the artificial marble has the advantages of excellent appearance, high degree of finish, even color, fine pressure and wear resistance, bear erosion and weathering, etc. It can be widely used in kitchen countertops, bath vanity tops, table tops, furniture, reception desks, etc. However, large amounts of artificial marble waste such as scraps or dust have been generated from sawing and polishing processes in artificial marble industry. Waste from artificial marble industry is increasing according to demand magnification of luxurious interior material. Artificial marble wastes can be recycled as aluminum oxide used as raw materials in electronic materials, ceramics production, etc., and methyl methacrylate(MMA) which become a raw material of artificial marble by pulverization, pyrolysis and distillation processes. The characteristics of artificial marble wastes was analyzed by using TGA/DSC and element analysis. Crude aluminum oxide was obtained from artificial marble waste by pulverization and thermal decomposition under nitrogen atmosphere. In this work, Box-Behnken design was used to optimize the pyrolysis process. The characteristics of crude aluminum oxide was evaluated by chromaticity analysis, element analysis, and surface area.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.96-102
• /
• 2012

Outer diameter stress corrosion cracking (ODSCC) has occurred for Alloy 600 (Ni 75 wt%, Cr 15 wt%, Fe 10 wt%) as a heat exchanger tube of the steam generator (SG) in nuclear power plants (NPP) during long term operation. Among many causes for SCC, lead (Pb) is known to be one of the most deleterious species in the secondary system. In the present work, the oxide formed on Alloy 600 was characterized as a function of the PbO content in 0.1 M NaOH at $315^{\circ}C$ by using an electrochemical impedance spectroscopy (EIS), a transmission electron microscopy (TEM), equipped with an energy dispersive x-ray spectroscopy (EDS). The oxide property was analyzed in view of SCC susceptibility.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1000-1007
• /
• 2001

In an evacuated tube solar collector, the stable sealing of the heat pipe to the glass tube is important for the collector to use for a long period of time. The sealing of copper tube to the glass is quite difficult because of the large differences in the physical and chemical properties of the two materials. In this study, therefore, a proper copper oxide layer was induced to improve the chemical bonding of the two materials, and the oxidation state of copper and the interface between copper and glass were examined by XRD, SEM and EDS. Its bonding strength was also measured. Cu$_2$O was formed when the bare copper was heat-treated under 600$^{\circ}C$, while CuO oxide layer was formed above that temperature. The bonding state of CuO to the copper was very poor. The borate treatment of the copper, however, extend the stable forming of Cu$_2$O layer to 800$^{\circ}C$. Borosilicate glass tube was sealed to a copper tube by Housekeeper method only when the sealing part was covered with Cu$_2$O layer. The bonding strength at the interface was measured 354.4N, its thermal shock resistance was acceptable.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.235-236
• /
• 2014

인듐 주석 산화물 박막을 In/Sn (2, 5 wt.%) 합금 타겟을 사용하여 DC 마그네트론 반응성 스퍼터링법을 이용하여 증착하였다. 기판온도는 상온에서 증착하였으며, 증착 중 DC 파워는 70W부터 120W 까지 10W 단위로 증가시켜 증착하였다. 증착 된 박막을 대기중에서 후 열처리를 각 6, 12 시간 진행하여 전기적 특성을 평가하였으며 평가 장비는 Hall-effect measurements system을 사용하였다. ITO (Indium Tin Oxide) 박막의 비저항은 합금의 Sn 조성별로 다르게 나타났다. Sn 5wt.% 타겟을 이용한 경우에는 DC 파워 90W를 기준으로 더 낮은 파워에서는 열처리에 따라 비저항이 증가하였고, 더 높은 파워에서는 열처리를 한 경우 비저항이 더 낮게 나타났다. 이러한 결과가 나온 이유는, DC 파워가 높은 경우 스퍼터링 공정 중 발생하는 고 에너지 입자 충돌에 의해 산소가 re-sputtering되어 산소가 부족한 박막이 형성되기 때문인 것으로 판단된다. Sn 2 wt.% 타겟의 경우에는 큰 차이를 나타내지 않았으며, 이러한 원인은 Sn 함량이 적기 때문에 산소 공급으로 인해 결정성이 향상되더라도 활성화 Sn의 양이 적기 때문에 나타나는 현상으로 판단된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.3
• /
• pp.67-73
• /
• 2001

This paper resents a developed measuring device of resistive leakage current and a fundamental discussion of deterioration diagnosis for Zinc Oxide(ZnO) arrester blocks. We have developed the leakage current detection device for ageing test and durability evaluation for ZnO arrester blocks. The resistive leakage current can be used as an indicator to discriminate whether the ZnO arrester blocks is in good state or in bad. The resistive leakage current measuring system with the compensation circuit was designed and fabricated. The sauce tests for ZnO arrester blocks were investigated by observing the resistive leakage current together with fast Fourier transform analysis. The proposed monitoring systems for the resistive leakage current can effectively be used to investigate the electrophysical properties of ZnO arrester blocks in laboratory and to develop the techniques of forecasting the deterioration of ZnO arresters in electric power systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.230.1-230.1
• /
• 2014

대면적 그래핀의 높은 제조비용과 낮은 생산성으로 인해 최근 산화그래핀(GO)을 박리하여 대면적화 하는 연구가 활발히 진행되고 있다. 하지만, Hummers 법에 의해 제조된 산화그래핀은 제조공정상 발생되는 황이나 수소 및 산소 등의 불순물에 의한 특성저하와 15층에서 25층 정도의 다층 구조에 의한 높은 접촉저항 때문에 그래핀 고유의 특성 발휘가 어렵다. 본 연구에서는 DC 열 플라즈마의 NH3 방전을 이용하여 산화그래핀의 불순물인 S, H, O를 완전히 제거하였고, DC 열 플라즈마 처리된 후의 산화그래핀의 Volume을 평균 2.5배정도 증가시켰다. 또한 N2와 He을 혼합 시킨 DC 열 플라즈마 방전으로 산화그래핀 표면에 N 을 도핑 하여 전기적 특성을 향상시켰다. N 도핑 농도는 최대 20wt%이었으며 N2과 He공급량, Current 조절에 의해 Dopping 농도를 제어하였다.