• Journal of the Korean institute of surface engineering
• /
• v.34 no.6
• /
• pp.585-591
• /
• 2001

니오비움 첨가 지르코늄 합금(Zr-1%Nb)의 고온 수증기에서 산화속도에 관한 연구를 수행하였다. 산화온도는 $700-1200^{\circ}C$이다. 대기압수증기에서 산화될 때, Zr -1%Nb은 2차법칙을 따르는 것으로 나타났으며, 이는 $900^{\circ}C$이하에서 3차법칙을 따르는 지 르칼로이 -4와 상이한 형태를 보이고 있다. $900^{\circ}C$이상에선 산화속도가 지르칼로이 -4보다 약간 낮으며, 산화후 금속층의 경도가 증가하였다. 경도증가로 보아 인성의 감소가 예상되며, 따라서 니오비움 첨가 지르코늄 합금의 사고시 안전성에 대한 주의가 요구된다.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.408-413
• /
• 2008

In this work, the use of LPRTO (low pressure rapid thermal oxidation) and remote plasma oxidation was evaluated for the preparation of ultra thin silicon oxide layer with less than 5 nm. The silicon oxide thickness grown by LPRTO was rapidly increased and saturated. The maximum thickness could be controlled at about 5 nm. As RF power and oxygen flow rate at a remote plasma oxidation increased, the behavior of oxide growth was almost the same as that of LPRTO. The oxide thickness of 4 nm was the maximum obtained by a remote plasma oxidation in this work. The quality of silicon oxide grown by LPRTO was comparable to the thermally grown conventional oxide.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.672-677
• /
• 1998

The following work examines the growth rate and microstructure of the $AI_2O_3$-composite formation by melt oxdation of pentad AI-alloys. The I weight % of each metal elements Cu and Ni were added to AI-IMg-3Si-3Zn and AI-IMg- 3Si-5Zn alloys. The diffenent pentad AI-alloys were oxidized 20 hours long at 1373K and 1473K. The oxidation rates were determined by observing the weight gain. The macro- and microstructure of formed oxide layer were examined by optical microscopy. The AI-IMg-3Si-5Zn-lCu alloy revealed the best oxidation behavior, but formedoxide layer was inhomogeneous.The oxidation rate were accelerated, and the uniform growth of the oxide layer with fine microstructure were obtained by putting a thin layer of $SiO_2$ on the surface of the alloy.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.296-302
• /
• 2006

The kinetics of the thermal-oxidative decomposition of waste polyurethane (PU) according to oxygen concentration has been studied using a non-isothermal thermogravimetric technique at several heating rates from 10 to $50^{\circ}C/min$. A kinetic model accounting for the effects of the oxygen concentration by the differential and integral method based on Arrhenius equation was proposed to describe the thermal-oxidative decomposition of waste PU. To obtain the information on the kinetic parameters such as activation energy, reaction order, and pre-exponential factor, the thermogravimetric analysis curves and its derivatives have been analyzed using the kinetic analysis method proposed in this work. From this work, it was found that reaction orders for oxygen concentration had a negative sign, and activation energy decreased as the oxygen concentration increased. It was also found that the kinetic parameters obtained from the integral method using the single heating rate experiments varied with heating rates. Therefore, it is thought that the differential method using the multiple heating rate experiments more effectively represents the thermal-oxidative decomposition of waste polyurethane.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.204-209
• /
• 1998

핵연료 펠렛이 장입되어 있는 원전연료봉 피복관은 핵분열성 물질의 외부 유출에 대한 일차 방호벽 역할을 하므로 원전의 안전성을 위해서는 피복관의 구조건전성 확보가 매우 중요하다. 고온, 고압의 운전 조건 속에서 연료봉 피복관은 산화막이 생성 상장하여 연료봉을 취성 파괴시킬 가능성이 있으므로 이를 가동중에 비파괴적으로 측정할 수 있는 방법을 개발할 필요가 있다. 산화막이 존재하는 지르칼로이 피복관에 대한 음파의 공명산란을 이론적으로 모델링하고 수치해석을 수행하였다. 산화막이 피복된 원통형 쉘의 공명산란에서 공명 원주파의 전파 특성은 산화막의 존재 여부와 그 두께 증가에 따라 크게 변화한다. 수치 해석 결과 제 1차 반대칭 (A$_1$) 원주파의 특정 부분파의 경우에는 산화막의 존재에도 불구하고 위상속도가 일정한 특이성을 보였다. 이러한 위상속도 특성을 실험을 통하여 확인하였으며 이 현상을 이용하여 산화막의 두께를 측정할 수 있는 새로운 비파괴 평가 방법을 제안하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.2
• /
• pp.67-76
• /
• 1996

저분자량 ($\overline{M}=1970$)을 갖는 poly(styrene)(PS)와 poly(vinymethylether) (PVME)의 블렌드를 열산화시킬 때 PVME의 분자량 감소 속도는 높은 분자량을 갖는 PS와 PVME의 블렌드를 열산화 시킬 때의 PVME 분자량 감소 속도보다 훨씬 느리다. 열산화 과정 동안 PS의 분자량은 변화하지 않았으며 저분자량의 PS의 일부가 산화된 PVME를 분리할 때 함께 녹음을 알 수 있었다. 저분자량의 PS의 모델 화합물로써 2. 4-diphenylpentane을 합성하였고 1%，5%，10%의 모델 화합물을 PVME에 첨가하여 열산화 시켰다. 이 모델 화합물을 첨가하여 PVME의 열산화를 약간 지연시킬 수 있음을 알 수 있었다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.196-201
• /
• 2003

대부분의 고체와 액체의 연소는 고체의 열분해에 의해 생성되는 가연성 기체나 액체의 증발에 의한 가연성증기가 공기중에 확산되는 형태의 확산연소이다. 이런 확산 연소에서 연소속도를 지배하는 요소는 연료와 산화제의 확산속도이며 고체와 액체 연료의 경우 기체상태의 열분해 생성물이나 증기의 생성속도가 연소속도에 영향을 미치는 요소가 된다. 이러한 형태의 연소에서 연료와 산화제의 공급상태에 따라 발열량 및 화염의 형태 등이 영향을 받게 된다. 화재에서 화재의 확대에 영향을 미치는 요소들 중에 화염의 높이와 복사열 에너지 등이 있다.(중략)

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.414-420
• /
• 1994

Birnessite, pyrolusite and hausmannite were synthesized and tested for the ability to oxidize Cr(III) to Cr(VI). These oxides differed in zero point of charge, surface area, and crystallinity. The kinetic study showed that Cr(III) oxidation on the Mn-oxide surface is a first-order reaction. The reaction rate was various for different oxide at different conditions. Generally the reaction by hausmannite, containing Mn(III), was faster than the others, and oxidation by pyrolusite was much slower. Solution pH and initial Cr(III) concentration had a significant effect on the reaction. Inhibited oxidation at higher pH and initial Cr(III) concentration could be due to the chance of Cr(III) precipitation or complexing on the oxide surface. Oxidations by birnessite and hausmannite were faster at lower pH, but pyrolusite exhibited increased oxidation capacity at higher pH in the range between 3.0 and 5.0. Reactions were also temperature sensitive. Although calculated activation energies for the oxidation reactions at pH 3.0 were higher than the general activation energy for diffusion, there is no experimental evidence to suggest which reaction is the rate limiting step.

• Korean journal of food and cookery science
• /
• v.10 no.2
• /
• pp.121-125
• /
• 1994

The antioxidant activity of gingerol according to temperature on soybean oil were examined by measuring peroxide value(POV). The induction period(IP) of soybean oil was 45; 276.0, 65; 17.0 and 105$^{\circ}C$ : 4.7 hours respectively by-measuring POV. The relative antioxidant effectiveness(RAE) of ginge-rol group were 45; 191, 65; 200, 65: 150, 85: 132 and 105$^{\circ}C$;106%. 'The activation energies(Ea) and temperature coefficients(Q10) for Arrhenius equations at 45∼105$^{\circ}C$, was estimated in order to find out the influence of temperature on the oxidation of soybean oil contai-ning various antioxidants. The soybean oil was more unstable at 45∼65$^{\circ}C$ than at 65∼105$^{\circ}C$ in the Ea and Q10. The soybean oils containing gingerol were more stable than the control group at 45∼105$^{\circ}C$, however, BHT group was unstable compared to gingerol group at 85∼105$^{\circ}C$.

• Food Science of Animal Resources
• /
• v.23 no.1
• /
• pp.50-55
• /
• 2003

Fresh ground pork was irradiated with the electron beam(3.0 and 5.0 kGy) using 2 different conveyer speeds (10 and 20 ㎐), respectively, in order to determine the effect of conveyer speeds on the development of lipid oxidation and microbial stability. During refrigerated storage, the development of lipid oxidation decreased significantly (p<0.05) with the increase in the electron beam conveyer speed from 10 to 20 ㎐. The ground pork with electron beam inhibited the growth of total aerobic bacteria and mesophiles. The inhibitory effect increased when the electron beam dose increased from 0 to 5.0 kGy. The finding that higher speed(20 ㎐) of electron beam had some antioxidative effect is very promising, however, other means to control the lipid oxidation must also be employed to fully utilize the sterilization effect of electron beam in ground pork.