• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.79-85
• /
• 2002

Plasma-sprayed Cr$_2$O$_3$-based coatings containing MoO$_3$were studied to gain a better understanding of the influence of MoO$_3$composition in the coatings on their tribological behaviour. A reciprocal type tribo-tester was employed to examine friction and wear behavior of the specimens at room temperature. The physical characteristics of worn surfaces were investigated by scanning electron microscopy and chemical composition of the coating surfaces was analyzed using a X-ray photoelectron spectrometer. The results showed that friction coefficient of the MoO$_3$-added coatings were lower than those without MoO$_3$addition. However pure Cr$_2$O$_3$coating showed the lowest wear loss at the self-mated test. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with MoO$_3$addition. XPS analysis of the protecting layer indicated that MoO$_3$composition was dominantly formed at the surface. MoO$_3$composition in the protecting layer appears to be more favorable in reducing the friction.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.851-856
• /
• 2002

Tribological behavior of plasma-sprayed $Cr_2O_3$-based coatings containing $MoO_3$ at 450$^{\circ}C$ was investigated to understand the influence of $MoO_3$. A reciprocal disc-on-plate type tribo-tester was employed to examine fricition and wear behavior of the specimens. The microstructure and phase composition of the coating was characterized with Transmission Electron Microscopy(TEM). The TEM analysis indicated that $MoO_3$ was dispersed into the grain boundary, resulting in the increase of the hardness and density of the coating. Worn surfaces were investigated by scanning electron microscopy and chemistry of the worn surfaces was analyzed using a X-ray Photoelectron Spectrometer(XPS). The results showed that the friction coefficient of the $MoO_3$-added coatings was lower than that without $MoO_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with $MoO_3$ composition in the protecting layer appears to be more favorable in reducing the friction.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.19-25
• /
• 2009

Molybdenite concentrate ($MoS_2$) is the major mineral for the molybdenum industry, of which the industrial processing is first converted to technical grade molybdenum trioxide ($MoO_3$) by its oxidative roasting and purification, used as a raw material for manufacturing several molybdenum compounds. In the present work, detailed experimental results for the oxidative roasting of low grade Mongolian molybdenite concentrate are presented. The experiments were carried out in the temperature range of 793 to 823 K under an oxygen partial pressure range of 0.08 atm to 0.21 atm by using a thermogravimetric analysis technique. The molybdenite concentrate was an average particle size of $67\;{\mu}m$. In the oxidative roasting of low grade Mongolian molybdenite concentrate, more than 95% of molybdenite was converted to molybdenum trioxide in 60 min. at 828 K. The lander equation was found to be useful in describing the rates of the oxidative roasting and the reaction order with respect to oxygen concentration in a gaseous mixture with nitrogen was 0.11 order.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.29-36
• /
• 2022

The hydrogen reduction behavior of molybdenum oxides was studied using a horizontal-tube reactor. Reduction was carried out in two stages: MoO₃ → MoO₂ and MoO₂ → Mo. In the first stage, a mixed gas composed of 30 vol% H₂ and 70 vol% Ar was selected for the MoO₃ reduction because of its highly exothermic reaction. The temperature ranged from 550 to 600 ℃, and the residence time ranged from 30 to 150 min. In the second step, pure H₂ gas was used for the MoO₂ reduction, and the temperature and residence time ranges were 700-750 ℃ and 30-150 min, respectively. The hydrogen reduction behavior of molybdenum oxides was found to be somewhat different between the two stages. For the first stage, a temperature dependence of the reaction rate was observed, and the best curve fittings were obtained with a surface reaction control mechanism, despite the presence of intermediate oxides under the conditions of this study. Based on this mechanism, the activation energy and pre-exponential were calculated as 85.0 kJ/mol and 9.18 × 10⁷, respectively. In addition, the pore size within a particle increases with the temperature and residence time. In the second stage, a temperature dependence of the reaction rate was also observed; however, the surface reaction control mechanism fit only the early part, which can be ascribed to the degradation of the oxide crystals by a volume change as the MoO₂ → Mo phase transformation proceeded in the later part.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.31-31
• /
• 1998

제트베인을 이용한 추력방향 제어장치를 개발하여 평균추력 2950 lbf, 평균 압력 714 psig, 연소시간 4.8초, 노즐 출구직경 약 100mm인 추진기관에 장착하고 이를 시험하고 분석하였다. 재질에 따른 제트베인의 삭마성을 알아보기 위하여 텅스텐과 구리(W/Cu), 지르코늄산화물과 텅스텐(ZrO$_2$/W), 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 3가지 재질의 베인을 사용하였다 시험된 제트베인 재질 중 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 합금을 사용한 베인이 내열성 및 삭마성에서 가장 우수하였으며(삭마량 27.65% 삭마율 5.7mm/sec), 지르코늄 산화물과 텅스텐(ZrO$_2$/W), 텅스텐과 구리(W/Cu)의 순서이었다.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.26-33
• /
• 2022

Molybdenum is widely used in many materials; thus, its recovery from ores and secondary resources has attracted considerable attention. In this study, the leaching of molybdenite ore using hydrochloric acid containing sodium chlorate as an oxidizing agent was studied. The effects of several variables, such as the concentrations of HCl and NaClO₃, reaction temperature and time, and pulp density, on the leaching of the ore were investigated. Under strong acidic and oxidizing conditions, the sulfide in the ore was dissolved as a sulfate ion, which formed gypsum with Ca(II), leading to a decrease in the leaching percentage of Mo(VI) from the ore. The leaching percentage of molybdenum was greater than 90%, while those of iron, calcium, and silicon were 38, 29, and 67%, respectively, under the optimum conditions: 2.0 M HCl, 0.5 M NaClO₃, pulp density of 5 g/L, temperature of 90 ℃, and treatment time of 60 min.

• Journal of the Korean Chemical Society
• /
• v.67 no.5
• /
• pp.393-397
• /
• 2023

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.749-755
• /
• 1997

Molybdenum phosphate(P/Mo = 0.6) has been synthesized with ammonium molybdate and phosphoric acid under aqueous solution. The kinetics of the ammoxidation of methylpyrazine over molybdenum phosphate catalyst was investigated with the variation of reaction temperature and partial pressure of methylpyrazine, oxygen and ammonia, respectively at atmospheric pressure. The catalytic activity was constant for 300hrs operation under our experimental conditions. Under the steady-state condition, the rate equation of methylpyrazine was shown as $-r=kP_{MP}P_{NH3}{^0}P_{O2}{^{\gamma}}({\gamma}=2.2;1.3{\leq}P_{O2}(kPa){\leq}4)$. The apparent activation energy was 29.6kcal/mol below 623K. The main product obtained in the ammoxidation of methylpyrazine is cyanopyrazine whose selectively was kept always over 90% regardless of conversion.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.393-398
• /
• 1995

The oxo-nitrosyl complexes (n-Bu4N)2[M4O12Mo(NO)2{RC(NH2)NHO}2{RC(NH)NO}2] (M=Mo, W; R=(CH3)2CH, n-CH3CH2CH2) have been prepared by the reactions of monomeric complex containing {Mo(NO)2}2+ and polyoxometalates with isobutyl- and n-butylamidoxime. The prepared complexes were characterized by elemental analysis, infrared, 1H NMR, 13C NMR and UV-visible spectroscopy. These complexes contain two {M2O5}2+ [M=Mo, W] cores and a central {Mo(NO)2}2+ core. The {Mo(NO)2}2+ unit was the formally cis type and C2v symmetry in geometric structure. The two {M2O5}2+ cores and a central {Mo(NO)2}2+ core were not nearly interacted with electronic localization, which were identified by spectroscopy.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.145-145
• /
• 2017

음극재에 사용되는 타이타니아 나노튜브($TiO_2$ nanotubes)는 높은 종횡비를 가지고 있으며, 기계적인 강도가 우수하고 화학적인 안정성이 높다. 그러나 낮은 전기전도도와 상대적으로 넓은 밴드갭(bandgap)은 다양한 활용 분야에 이 물질이 활용되는 것을 제한하고 있는 상황이다. 전기 화학적 분야에서 광화학 반응 또는 과전압에서 밴드갭을 줄이기 위한 타이타니아 나노튜브의 나노 구조 변형에 대한 많은 연구가 있어왔다. 본 연구에서는 산화 몰리브덴(Molybdenum oxide)을 촉매로 사용하여 타이타니아 나노튜브에 전기충격법을 이용하여 도핑했다. 생성된 타이타니아 나노튜브를 $450^{\circ}C$에서 1시간 30분 동안 가열하여 타이타니아 나노구조를 아나타제(anatase) 구조로 변형켰다. 타이타니아 나노튜브의 구조적인 변화를 scanning electron microscopy(SEM), energy-dispersive X-ray spectroscopy(EDS) 등을 통해 측정했고 UV-Visiblespectroscopy를 통해 도핑된 타이타니아 나노튜브의 밴드갭을 측정하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 기존의 타이타니아 나노튜브가 가지는 밴드갭인 3.0 ~ 3.2eV 범위보다 더 낮아진 2.6 ~ 2.8eV의 범위를 가지는 것을 확인하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 다양한 광촉매 분야에 적용될 수 있을 것으로 예상된다.