• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Clean Technology
• /
• v.13 no.2
• /
• pp.143-150
• /
• 2007

The objective of this study is to develop hydrocarbon-based cleaning agents by blending paraffins, glycol ethers and siloxanes in oder to effectively clean contaminants such as flux, solder and grease. And the effect of cleaning ability by wetting index, aniline points and solubility parameter of the formulated hydrocarbon-based cleaning agents were studied in this work. The formulated hydrocarbon-based cleaning agents were prepared on the base of physical properties of their individual components. Wetting indexes and aniline points of their were measured through experiments and solubility parameters of their were calculated based on the Hansen's equation. In this study, evaluation of cleaning ability by cleaning agents were carried out using contaminants such as flux, solder, and grease. The experimental results showed that the cleaning ability of the formulated cleaning agents was excellent in cleaning contaminants such as flux, solder and grease and that the influencing parameters on their cleaning efficiency were found to be different according to contaminant types. MC($20.3MPa^{1/2}$), DF-1 ($24.2MPa^{1/2}$) and DF-2($21.5MPa^{1/2}$) with similar solubility parameter as flux ($21.3MPa^{1/2}$) showed 100% cleaning efficiency within 3 minutes in flux cleaning. And CFC-113, MC and 1,1,1-TCE with low aniline point less than $-20^{\circ}C$ showed excellent cleaning efficiency in solder cleaning. DG-1($16.2\;MPa^{1/2}$) and DG-2($15.5\;MPa^{1/2}$) with similar solubility parameter as grease($15.0{\sim}17.0\;MPa^{1/2}$) showed relatively low cleaning efficiency of grease, but CFC-113 and MC with high wetting index and low aniline point showed good cleaning efficiency in grease cleaning. As a result of this study, the hydrocarbon-based cleaning agents alternative to regulated cleaning agents such as CFC-113, 1,1,1-TCE and MC were able to be developed through properly blending paraffins, glycol ethers and siloxanes for cleaning flux, solder and grease. And it can be shown that various influencing parameters of cleaning efficiency such as wetting index, aniline point, solubility parameter and etc. of the non-aqueous cleaning agent should be reviewed for prediction of their cleaning ability and can be applied to formulation of cleaning agents.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.277-306
• /
• 2017

Most past studies on the Critical Success Factors of Company Informatization focused on the completeness of Informatization and its financial effect, and there have not been enough studies on whether a company's management strategies can be supported by establishing Informatization direction. This implies that there must be verification on the followings; whether Informatization focuses on steering the implementation of management strategies, what correlation there are between major mechanism factors and Informatization performance. This also implies that there must be a new study to re-interpret the existing success factors of Informatization into strategic management paradigm. The purpose of this study is to empirically verify the influence of subject, environment, resource, and mechanism factors on informatization achievement, and to analyze the differences in influence of informatization success factors on informatization achievement depending on domestic large corporations and SMEs. This study presented the verification results for seven research hypotheses. It was confirmed through empirical analysis that securing resource factor was significant in informatization performance and that all sub-factors of learning mechanism and coordination mechanism were also significant in enterprise informatization achievement. In addition, it was confirmed through the control effect analysis depending on enterprise size that the differences in informatization performance of large corporations and SMEs are due to support environment factor, learning mechanism, and selection mechanism. The implications of this study are as follows: First, the significance of mechanism factors such as learning, internal coordination, and external coordination are relatively higher than other factors in informatization achievement. Secondly, informatization success factors that SMEs must focus on achieving are presented by analyzing the differences on informatization achievement of large corporations and SMEs. Third, since empirical research for informatization success mechanism factors not covered empirically in the prior research was directly progressed, it is thought that it could provide a comprehensive understanding for mechanism factors. In addition, this study is thought to provide a practical contribution that can be applied to other industrial areas and enterprises.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.219-237
• /
• 2017

Looking into the top-five innovative sectors in Korea's manufacturing and service industries, this study empirically analyzes the effect of innovation performance on R&D investment, which is one of the most important strategic decisions for corporate management. In the midst of an uncertain business environment, R&D investment has been regarded as the most important strategic decision making in corporate management related to innovation. Corporate management, however, tend to be reluctant to make sufficient R&D investment due to the risk of an investment failure. Therefore, having R&D investment by offsetting this risk has been deemed as a key task for corporate management. However, prior studies have failed to identify which factors affect companies' strategic decision making on R&D investment. This study is to remedy this weakness of prior study. Relying on path dependency theory at organization-level and dominant logic at individual-level, this study empirically examines the multiple regression model, which sees entrepreneurial orientation as a positive mediator between innovation performance and R&D investment. The results found in the analysis of 242 local companies in the manufacturing and service sectors represent that innovation performance has a direct and positive effect on R&D investment, while it indirectly affects R&D investment through the mediating roles of entrepreneurial orientation. They also revealed that innovation performance had a meaningful impact on entrepreneurial orientation, which is an inclination to seek innovation, led to R&D investment. The founding of this study imply that innovation performance in the past affects innovation strategies in the future, and such a relationship could be strengthened by entrepreneurial orientation as the dominant logic of corporate management.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.93-114
• /
• 2020

Platform is considered as an alternative strategy to the traditional linear pipeline based business. Moreover, in the 4th industrial revolution period, efficiency driven pipeline business model needs to be changed to platform business. We have such success stories about platform as Apple, Google, Amazon, Uber, and so on. However, for those smaller corporations, it is not easy to find out the transformation strategy. The essence of platform business is to leverage network effect in management. Thus platform based management can be rephrased as network management across the business functions. Research on platform business is popular and related to diverse facets. But few scholars cover what the research trend of the domain is. The main purpose of this paper is to identify the research trend on platform business in Korea. To do that we first propose the analytical model for platform architecture whose components are consumers, suppliers, artifacts, and IT platform system. We conjecture that mapping of the research work on platform to the components of the model will make us understand the hidden domain of platform research. We propose three hypotheses regarding the characteristics of research and one proposition for the transitional path from pipeline to platform business model. The mapping is based on the research articles filtered from the Korea Citation Index, using keyword search. Research papers are searched through the keywords provided by authors using the word of "platform". The filtered articles are summarized in terms of the attributes such as major component of platform considered, platform type, main purpose of the research, and research method. Using the filtered data, we test the hypotheses in exploratory ways. The contribution of our research is as follows: First, based on the findings, scholars can find the areas of research on the domain: areas where research has been matured and territory where future research is actively sought. Second, the proposition provided can give business practitioners the guideline for changing their strategy from pipeline to platform oriented. This research needs to be considered as exploratory not inferential since subjective judgments are involved in data collection, classification, and interpretation of research articles.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.352-356
• /
• 2011

It is true that the industrial development has usually been accompanied with urbanization or centralization of population that has inevitably led to high-rise buildings and densely built-up living area in the cities. While it is badly needed to acquire as much green land within the city limits as possible to compensate for reduced space for recreational purpose in parallel with increasingly urbanized area, the living conditions of plants have become seriously devastated due to shortage of sun light walled-off by high-rise buildings and contaminated environment and air. The shade that is generated by high-rise and compact buildings hinders growth of plants, which makes it urgent to develop native ground cover plant that is strongly viable in the shade. For this purpose, Ligularia stenocephala, best known as greens for Ssam (rice and condiments wrapped in leaves) was cultivated under the 30%, 50%, and 80% shadings and observed to see if there would be any changes in soil conditions, growth of plants and chlorophyll contents depending on the shading rate. The leaf number was 10.8 pieces under the 50% shading and 8.4 under the 30%-shading, 7.7 pieces more than that cultivated under lighting. The leaf width turned out to be excellent from cultivation under the 50%- shading, an evidence indicating its possibility of being cultivated as native ground cover plant in the shade. The live weight of the plants cultivated under the shading increased to 31.63 g, 43.39 g and 19.40 g, respectively, compared to 90.43 g of those in the untreated control plot. The increase in growth of roots was particularly significant with 48.48 g in comparison to 12.33 g under 30% shading cultivation. The chlorophyll synthesis amounted to 46.2 under the 50% shading, showing an increase compared to 41.9 under lighting. The chlorophyll synthesis rather shrank under other shading conditions. The cultivation of Ligularia stenocephala under the 50% shading showed the best condition in growth as native ground cover plant.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.53-65
• /
• 2013

In Korea recently the consumption of coffee has been drastically increased and majority of people who are more than $20^{th}$ are drinking more than a cup of coffee every day. Nowadays coffee a kind of essential items in modern urban society. As the popularity of the coffee is increasing, As the coffee consumption is growing, the studies on coffee also have been increased. Many of the studies on coffee were focused on the consumer attitudes, coffee shops and franchise coffee shops, and coffee components or ingredients. As the products of the coffee are becoming diverse, the consumers of coffee also becoming diverse. There was a study showing that coffee has variety of types, and that motivations and attitudes for coffee consumption are different depend on demographic statistics such as age and life styles. On this study main focus was life style and consumer's motivation on coffee consumption. For this study the survey was conducted on the people living in Seoul City and Kyengkido from March 1, 2013 to March 31, 2013. 600 questionnaires were distributed and 480 were collected and 470 were used for analysis of this study. The statistics program used in this study was SPSS. The method used in the analysis wee factors analysis test, reliability test, validity test, t-testy, One-Way ANOVA, and regression analysis. In this study according to the factor analysis, the life styles were classified the following six categories ; wellbeing pursuit, taste pursuit, atmosphere pursuit, dine-out pursuit, instant pursuit, and economic value pursuit. The factors of coffee consumption motivation were 6; wellbeing consumption motivation, changing mood consumption motivation, social consumption motivation, habitual consumption motivation, and emotional consumption motivation. The demographic factors used in this study were age, marital status, occupation, educational background, residence, income, and eating-out expenses. The hypothesis used in this study were two. The first hypo-thesis was whether the coffee consumption was affected by the life styles. The second hypo-thesis was whether there was any statistical differences on the motivation of coffee consumption according to the characteristics of life style. The outcome of this study demonstrated that life styles had partial impact on coffee consumption motivations. According to the characteristics of the life style, except for the habitual consumption motivation, all the other factors showed statistical differences on coffee consumption motivations according the characteristics of life styles.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.4
• /
• pp.145-157
• /
• 2017

SMEs play an important role in the domestic economy. Regarding competency to respond flexibly to unpredictable changes, agility of SMEs is more emphasized. Entrepreneurship orientation is an important factor in the source of SMEs that enable such competency. Entrepreneurial orientation refers to the tendency of a CEO or a member of a corporation to be innovative, risk-taking, and active in the face of various market opportunities. In other words, it refers to the tendency to be expressed in the activities of the entire company without regard to specific technologies or industries. Entrepreneurial orientation has a direct or indirect effect on business performance. Therefore, in this study, we conducted theoretical and empirical studies on the effect of entrepreneurial orientation of SME managers on business performance. Research hypotheses were derived through theoretical research. We focused on the mediating effect of innovation activity and tried to identify the mechanism that entrepreneurial orientation leads to business performance through product innovation and service innovation activity. We investigated whether innovativeness, proactiveness, and risk-taking, which are sub-variables of entrepreneurial orientation, affect business performance through product innovation and service innovation. We conducted a survey of SMEs in Busan and Kyungnam regions to examine the research hypotheses. The results show that product innovation and service innovation have mediating effects. The results of the study are as follows. Product innovation has mediating effect of innovativeness and risk-taking on business performance. Service innovation has been found to mediate innovativeness, proactiveness, and risk-taking on business performance. There was a difference in the mediation effect between the two innovations. Product innovation showed a low mediating effect and a large direct effect. On the other hands, service innovation is relatively more mediating than product innovation. The implications of the research results are derived in relation to the essential differences between product innovation and service innovation. Limitations of the study and directions for future research are presented.

• The Korean Journal of Malacology
• /
• v.32 no.4
• /
• pp.279-287
• /
• 2016

NIFS conducted a feasibility study on the bay scallop Argopecten irradians aquaculture in the test site of Dongsanri, Yangyang-gun, Gangwon-do in June 2015. The transplantation for the test was also carried out in June. The average shell length was $5.79{\pm}0.6mm$ at the time, $15.83{\pm}0.8mm$ in July, $39.40{\pm}0.7mm$ in September, $55.72{\pm}5.8mm$ in November and $59.67{\pm}1.7mm$ in December. At the time of transplantation, the average shell height was $6.06{\pm}0.7mm$, and it grew to $16.40{\pm}0.9mm$ in July, $53.16{\pm}5.2mm$ in November and $55.80{\pm}2.9mm$ in December. Total weight was $0.78{\pm}0.5g$ in July but increased to $24.25{\pm}4.2g$ in November and $26.06{\pm}4.3g$ in December. The daily growth rate of shell length(DGR) was 0.33 mm / day in June, 0.43 mm / day in September and 0.13 mm / day in November. DGR of weight was 0.20 g / day in June, 0.27 g / day in September, 0.06 g / day in November. The relative growth of shell length and shell height was y = 0.9132x and $R^2=0.9923$. As a result, it was proved that bay scallop aquaculture is possible in Gangwon province, the northern part of the East Sea. This will definitely increase the income of fishermen by enabling them to culture more aquaculture species than the single large Patinopecten yessoensis in the region.