• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.199-205
• /
• 2012

Although the stainless steel crowns have been recognized as the most effective and durable form of restoration for primary molars, they have been regarded by many dentists as having definite demerits such as invasive nature of procedural complexity and behavioral aspects of children. As an alternative to conventional technique of stainless steel crown restoration, the Hall technique was first introduced in 1988, which is characterized by just pushing the pre-contoured, cement filled crown form onto the abutment molar with no local anesthesia, no caries removal, no tooth preparation. According to several reports, this can slow, arrest, or even reverse the progress of caries. In addition, its atraumatic feature gives less discomfort and stress to children than conventional one, which is thought excellent especially in younger children. Also, It has been reported to be effective and acceptable to dentist, child patients and their parents. In this case study, three children with age of 4 years 5 months, 4 years 10 months, 6 years 4 months were treated with stainless steel crowns using Hall technique on first primary molar respectively. The teeth were free from pulpal, periapical pathology. After follow up of about 3 to 6 months period, the results showed clinically successful outcomes without any marked complication in pulp, tooth or soft tissue till now. But, it should be kept in mind that this technique is not proper to every child, every carious molar, or every dentist. Thorough distinction of indicated cases and continuous follow-up check is highly required. Conclusively, Hall technique might be an effective and realistic minimally invasive alternative for the carious primary molars especially in younger or disabled children, despite potential doubts on its efficacy and some definite limitations.

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.224-238
• /
• 2001

본 논문은 ATM(Abstract Timed Machine)으로 명세된 실시간 시스템을 검증하기 위한 방법을 기술한다. ATM은 임무 위급 시스템인 실시간 시스템을 명세, 분석, 검증하기 위한 정형기법이다. ATM은 모드와 전이, 포트로 구성되어 있으며 모드는 머신의 압축된 상태를 표현한다. 전이는 하나의 모드에서 다른 모드로의 전환을 나타내며 조건과 이벤트로 구성되어 있다. 포트는 ATM간의 상호작용을 위한 진입을 표현한다. 다른 정형기법과 비교하여 ATM은 소프트웨어의 순환공학 과정에서 사용하기 위해 설계되었다. 역공학 측면에서 볼 때 ATM은 계산 논리뿐만 아니라 실시간 시스템의 실제 소스코드에 있는 설계나 환경정보를 표현할 수 있다. 이러한 목적을 위해 ATM의 모드는 계산모드, 추상화 모드, 주제모드로 구분된다. 계산 모드는 코드 상에서의 논리와 계산을 나타내며 추상화 모드는 모드와 전이의 블록을 하나의 ATM으로써 표현한다. 대개의 경우, 이것은 코드 상에서의 블록을 ATM내 하나의 모드로 나타낼 때 사용한다. 주제 모드는 예외나 주기적 동작 등과 같은 다수의 ATM의 주제를 표현한다. 실시간 시스템을 검증하기 위해 시스템의 소스 코드는 역명세 과정을 통하여 ATM으로 표현된다. 검증은 ATM에 대한 도달성 그래프를 생성하는 것에 의해 수행된다. 도달성 그래프는 상태와 시간을 추상화되고 압축된 형태로 표현할 수 있으며 그 결과 시간 속성을 지닌 상태 공간을 감소시킬 수 있다. 또한 시스템의 교착상태를 쉽게 발견할 수 있다. 본 논문은 ATM과 실행 모델, 도달성 그래프, 검증을 위한 속성 등을 기술하며 이들을 다른 정형 방법들과 예제를 통하여 비교한다.수 있다. 모피우스는 헤더나 광고와 같은 불필요한 정보들을 제거하는 별도의 단계를 거치지 않으므로 wrapper를 빠르게 생성한다. 궁극적으로 모피우스는 새로운 웹 상점을 사용자가 자유롭게 추가, 삭제할 수 있는 환경을 제공한다.X>와 반응시킬 경우에는 반응식 c에 의거 진행됨을 예측할 수 있었다.의거 진행됨을 예측할 수 있었다.이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.pplied not only to the strike system in the RSC circle, but also to the logistics system in the SLC circle. Thus, the RSLC model can maximize combat synergy effects by integrating the RSC and the SLC. With a similar logic, this paper develops "A Revised System of Systems with Logistics (RSSL)" which combines "A New system of Systems" and logistics. These tow models proposed here help explain several issues such as logistics environment in future warfare, MOE(Measure of Effectiveness( on logistics performance, and COA(Course of Actions)

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1214-1219
• /
• 2011

This study was conducted to compare of greenhouse gas emissions between 1996 and 2006 IPCC (Intergovernmental Panel on Climate Change) guidelines change. Greenhouse gas emissions were calculated separately by rice cultivation, agricultural soils and field burning of agricultural residues from 2000 to 2008 according to 1996 and 2006 IPCC guidelines. To calculate greenhouse gas emissions, emission factor and activity data were used IPCC default value and the food, agricultural, forestry and fisheries statistical yearbook of MIFAFF (Ministry for Food, Agriculture, Forestry, and Fisheries). The greenhouse emissions by 1996 IPCC guidelines were highest in rice cultivation as 4,008 $CO_2$-eq Gg of 2000 and 3,558 $CO_2$-eq Gg of 2008. The emissions by N-fixing crops, crop residues returned soils and field burning did not much affect the total emissions. $CO_2$ emissions by urea and lime were calculated by adding in 2006 IPCC guidelines and its emissions were 157 and 82 $CO_2$-eq Gg in 2008 respectively. The emissions by N-fixing crops, crop residues returned to soils and field burning, in common with 1996 IPCC guidelines, did not have a significant impact on total emissions. The total emissions in agronomic sector was decreased continuously from 2000 to 2008 and annual emissions by 2006 IPCC guidelines were approximately 26-29% less than the 1996 IPCC guidelines.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.827-839
• /
• 2012

A cell phone is very close to the user and therefore should be considered in digital forensic investigation. Recently, the proportion of smartphone owners is increasing dramatically. Unlike the feature phone, users can utilize various mobile application in smartphone because it has high-performance operating system (e.g., Android, iOS). As acquisition and analysis of user data in smartphone are more important in digital forensic purposes, smartphone forensics has been studied actively. There are two way to do smartphone forensics. The first way is to extract user's data using the backup and debugging function of smartphones. The second way is to get root permission, and acquire the image of flash memory. And then, it is possible to reconstruct the filesystem, such as YAFFS, EXT, RFS, HFS+ and analyze it. However, this methods are not suitable to recovery and analyze deleted data from smartphones. This paper introduces analysis techniques for fragmented flash memory pages in smartphones. Especially, this paper demonstrates analysis techniques on the image that reconstruction of filesystem is impossible because the spare area of flash memory pages does not exist and the pages in unallocated area of filesystem.

• Journal of Hospice and Palliative Care
• /
• v.5 no.2
• /
• pp.136-145
• /
• 2002

Purpose : This study was designed to develop an instrument that could be used for comprehensive and effective need assessment for patients with cancer. Methods : In the first phase, a conceptual framework for the instrument was established by Wingate & Lackey (1989). In the second phase, the preliminary instrument was drawn up through a review of the literature and in consultation with three professors in Nursing. In the third phase validity and reliability of the preliminary instrument were tested as follows; 1) an expert validity test of the preliminary instrument was done by nine head nurses and charge nurses who had over ten years experience caring for patients with cancer at Wonju Christian Hospital. 2) A construct validity test and reliability test was done for the instrument by 116 staff nurses selected by convience sampling from hospitals located in Kang-Won, Kyoung-Ki, and Choong-Chung Provinces. The collected data were analyzed using SPSS 10.0 WIN program. For the factors of the instrument, factor analysis was used. The reliability of the scale was analyzed by Cronbach's alpha. Results : The results of the experts' test of validity, showed that, of 32 items, only one item had less than 55.4%. It was then deleted and a total of 31 items was selected. On the basis of the results of the factor analysis, the following six components were identified: physiological, informational, spiritual, and emotional needs, available resources, and legal/financial needs. These factors explained 61.8% of the variance. In the factor analysis, the first factor (physiological needs) and the second factor (informational needs) explained 25.4% and 10.9% of the variance respectively, which were major factors for the needs of patients with cancer in Korea. Cronbach' alpha for the scale was .90 indicating internal reliability. Conclusion : This instrument can be effectively utilized for assessment of needs of patients with cancer in Korea. Use of the needs assessment instrument developed in this study will allow nurses to develop nursing interventions that provide comprehensiveness and continuity in meeting the needs of patients with cancer.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.88-95
• /
• 2010

The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using "single length"technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan's test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.225-235
• /
• 2009

A common procedure of restoration of endodonticlly treated tooth with fiber-reinforced post is followed by core build-up after post cementation. However, this technique is complex and time-consuming. The aim of this study was to compare fracture strength of premolar, restored with various methods of core fabrications on fiber-reinforced posts and casting metal restoration. Forty five freshly extracted human mandibular premolars were obtained and devided into 5 groups acconding to the type of post and methods of core build-up. In Group A, D.T. $Light-post^{(R)}$ were cemented with $DUO-LINK^{TM}$ and then $LIGHT-CORE^{TM}$ was used for core restoration. In Group B, D.T. $Light-post^{(R)}$ and $DUO-LINK^{TM}$ were used for cementing in the postspace, and $DUO-LINK^{TM}$ was used again for core restoration. In Group C, $Light-post^{(R)}$ bonding and the core build-up were performed simultaneously by using $DUO-LINK^{TM}$. In Group D, $LuxaPost^{(R)}$ was bonded by using $LuxaCore^{(R)}-Dual$. Again, $LuxaCore^{(R)}-Dual$ was used for core restoration. In Group E, $LuxaPost^{(R)}$ bonding and the core build-up were performed simultaneously by using $LuxaCore^{(R)}-Dual$. Axial reduction was formed parallelly as possible and 45 degree bevel was made at buccal occlusal surface. Crowns were fabricated and cemented. Each tooth was embedded in self-curing acrylic resin to the level of 2mm below the CEJ. Specimens were fixed on universal testing machin such that the axis of the tooth was at 45 degree inclination to the horizontal plane, and compressive force was applied at a crosshead speed of 1mm/min until failure occurred. The mean fracture strength was the highest in group A followed by descending order in group B, D, E and C. However, there were no statistically significant differences between groups with regard to the fracture strength. The type of the post or build-up methods of the core does not seem to influence the fracture strength.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.1-17
• /
• 2023

Purpose. The purpose of this study was to examine the correlation between the finish line designs and the marginal adaptation of nonprecious metal alloy coping produced by different digital manufacturing methods. Materials and methods. Nonprecious metal alloy copings were made respectively from each master model with three different methods; SLS, milling and casting by computer aided design and computer aided manufacturing (CAD-CAM). Twelve copings were made by each method resulting in 72 copings in total. The measurement was conducted at 40 determined reference points along the circumferential margin with the confocal laser scanning microscope at magnification ×150. Results. Mean values of marginal gap of laser sintered copings were 11.8 ± 7.4 ㎛ for deep chamfer margin and 6.3 ± 3.5 ㎛ for rounded shoulder margin and the difference between them was statistically significant (P < .0001). Mean values of marginal gap of casted copings were 18.8 ± 20.2 ㎛ for deep chamfer margin and 33 ± 20.5 ㎛ for rounded shoulder margin and the difference between them was significant (P = .0004). Conclusion. Within the limitation of this study, the following conclusions were drawn. 1. The variation of finish line design influences the marginal adaptation of laser sintered metal coping and casted metal coping. 2. Laser sintered copings with rounded shoulder margin had better marginal fit than deep chamfer margin. 3. Casted copings with deep chamfer margin had better marginal fit than rounded shoulder margin. 4. According to the manufacturing method, SLS system showed the best marginal fit among three different methods. Casting and milling method followed that in order.

• Journal of KIISE:Software and Applications
• /
• v.28 no.2
• /
• pp.179-191
• /
• 2001

Comparison shopping is a merchant brokering process that finds the best price for the desired product from several Web-based online stores. To get a scalable comparison shopper, we need an agent that automatically constructs a simple information extraction procedure, called a wrapper, for each semi-structured store. Automatic construction of wrappers for HTML-based Web stores is difficult because HTML only defines how information is to be displayed, not what it means, and different stores employ different ways of manipulating customer queries and different presentation formats for displaying product descriptions. Wrapper induction has been suggested as a promising strategy for overcoming this heterogeneity. However, previous scalable comparison-shoppers such as ShopBot rely on a strong bias in the product descriptions, and as a result, many stores that do not confirm to this bias were unable to be recognized. This paper proposes a more scalable comparison-shopping agent named MORPHEUS. MORPHEUS presents a simple but robust inductive learning algorithm that antomatically constructs wrappers. The main idea of the proposed algorithm is to recognize the position and the structure of a product description unit by finding the most frequent pattern from the sequence of logical line information in output HTML pages. MORPHEUS successfully constructs correct wtappers for most stores by weakening a bias assumed in previous systems. It also tolerates some noises that might be present in production descriptions such as missing attributes. MORPHEUS generates the wrappers rapidly by excluding the pre-processing phase of removing redundant fragments in a page such as a header, a tailer, and advertisements. Eventually, MORPHEUS provides a framework from which a customized comparison-shopping agent can be organized for a user by facilitating the dynamic addition of new stores.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.17-30
• /
• 2020

Objective : The purpose of this study is to provide basic data for the development of a instrumental activities of daily living training program called grocery shopping for schizophrenic patients in Delphi. Methods : The final program items and contents were completed through the first and third delphi surveys from August 2018 to March 2019. The expert composition selected 26 occupational therapists related to mental health. Three surveys were conducted and 23 experts participated in the Delphi survey. The second questionnaire, which was created from an open questionnaire, was designed to indicate the degree of importance using the Likert 5-point scale. As a result of the response of the 3rd questionnaire, the level of expert consensus was reconfirmed by analyzing average, standard deviation, and content validity ratio (CVR). Results : Three rounds of Delphi research reveal four categories of questions: grocery shopping views, product purchase strategies, necessary functions, and expert knowledge and experience on how to make purchase decisions. 24 items were selected. Through the 2nd and 3rd Delphi surveys, 4 items that did not meet the criteria of goodness of fit of each item or duplicated the contents were deleted and finally 20 items were extracted. Conclusion : Experts' agreement on grocery shopping technology was drawn from an occupational therapy perspective so that patients with schizophrenia living in the community could recover and participate as a member of society.