• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.67-80
• /
• 2022

This study was conducted to derive policy measures such as fostering and supporting by examining the actual conditions of domestic startups. The subject of this study was the start-ups located in Seongnam-si, where Pangyo Techno Valley, which is the highest-level innovation cluster in Korea and is evaluated as a start-up mecca. Startups were defined as startups under 7 years old based on new technologies such as IT, BT, and CT, and the subjects of the study were selected. This can be seen as a step forward from previous research in that it embodies the concept of a startup that was previously abstract in a quantitatively measurable way. As a result of the analysis, about 94% of startups are distributed in the so-called "Death Valley" growth stage, and startups above scale-up, which means full-scale growth beyond BEP, account for about 6%. appeared to be occupied. He cited the problem of start-up funds as the biggest difficulty in the early stages of startups, and cited the loan evaluation method that prioritizes sales or collateral in raising funds as the biggest problem. In addition, start-ups rated the access to private investment capital such as VC, AC, and angel investors at a low level compared to policy funds, which are public funds. Most startups showed a lot of interest in overseas expansion, and they chose matching overseas investors such as overseas VCs as the biggest support for overseas expansion. The overall competitiveness in the overseas market was 49.6 points, which is less than 50 points out of 100, indicating that the overall competitiveness was somewhat inferior. It was analyzed that public support and investment in overseas sales channels (sales channels, distribution networks, etc.) should be prioritized along with enhancement of technological competitiveness in order for domestic startups to increase their competitiveness in overseas markets as well as in the domestic market.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.4
• /
• pp.193-204
• /
• 2022

This study analyzed the degree of influence of measurement and improvement of customer satisfaction level targeting kiosk users. In modern times, due to the development of technology and the improvement of the online environment, the probability that simple labor tasks will disappear after 10 years is close to 90%. Even in domestic research, it is predicted that 'simple labor jobs' will disappear due to the influence of advanced technology with a probability of about 36%. there is. In particular, as the demand for non-face-to-face services increases due to the Corona 19 virus, which is recently spreading globally, the trend of introducing kiosks has accelerated, and the global market will grow to 83.5 billion won in 2021, showing an average annual growth rate of 8.9%. there is. However, due to the unmanned nature of these kiosks, some consumers still have difficulties in using them, and consumers who are not familiar with the use of these technologies have a negative attitude towards service co-producers due to rejection of non-face-to-face services and anxiety about service errors. Lack of understanding leads to role conflicts between sales clerks and consumers, or inequality is being created in terms of service provision and generations accustomed to using technology. In addition, since kiosk is a representative technology-based self-service industry, if the user feels uncomfortable or requires additional labor, the overall service value decreases and the growth of the kiosk industry itself can be suppressed. It is important. Therefore, interviews were conducted on the main points of direct use with actual users centered on display color scheme, text size, device design, device size, internal UI (interface), amount of information, recognition sensor (barcode, NFC, etc.), Display brightness, self-event, and reaction speed items were extracted. Afterwards, using the questionnaire, the Kano model quality attribute classification of each expected evaluation item was carried out, and Timko's customer satisfaction coefficient, which can be calculated with accurate numerical values The PCSI Index analysis was additionally performed to determine the improvement priorities by finally classifying the improvement impact of the kiosk expected evaluation items through research. As a result, the impact of improvement appears in the order of internal UI (interface), text size, recognition sensor (barcode, NFC, etc.), reaction speed, self-event, display brightness, amount of information, device size, device design, and display color scheme. Through this, we intend to contribute to a comprehensive comparison of kiosk-based research in each field and to set the direction for improvement in the venture industry.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.6-25
• /
• 2024

This study concentrated on a report on the results of smelting experiments conducted eight times by the Jungwon National Research Institute of Cultural Heritage, put together the goals and results of the operation, and examined changes in the content of experiments and in the experimental results. First, changes related to operation, such as the ratio of raw materials to fuel and the presence or absence of additives, were reviewed depending on the operation goal. In addition, the results of metallurgical analysis of raw materials, formations, and byproducts were summarized and reviewed by comparing them with materials excavated from the ruins. The operation method varied up to the eighth smelting experiment in terms of iron ore roasting, additives, and raw material/fuel ratio. After reviewing the results again, pure iron with a low carbon content began to be confirmed through metallurgical analysis. As a result, it was confirmed that the charging ratio of raw materials and fuel plays an important role depending on the purpose of production. In addition, most of the products are gray cast iron, and it was deemed that this is due to changes in the internal structure of the pig iron while it was left in the furnace for a long time. The iron was an ingot that was in a molten state even though the carbon content did not reach 4.3%, where the process reaction takes place, and it was deemed to have been caused by excessive operating temperature. Based on the previously reviewed results and the structure and shape of the experimental furnace used in other ironmaking technology restoration experiments, this study finally attempted to restore the structure of an ancient iron smelting furnace, including the furnace's upper structure. By comprehensively referring to the remaining conditions of the excavated iron smelting furnace and the characteristics of the blow pipe, the form of the ancient iron smelting furnace was subdivided into six categories: furnace wall thickness, furnace height, blower height, blow pipe size, furnace inner wall shape, and top shape, and a restoration plan was proposed. To improve the problems of the restoration plan and the Jungwon National Research Institute of Cultural Heritage's experiments that have been conducted through continuous trial and error, an experiment that reflects changes in operating methods by lowering the furnace height and controlling the blowing volume is necessary.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.144-166
• /
• 2024

The Cultural Heritage Committee is an important organization that has been deliberating on important matters related to the preservation of cultural properties in the Republic of Korea for more than 60 years since 1962. The Cultural Heritage Preservation Committee was active in 1961, which was a short period of about a year, but the minutes prepared at the time confirmed that it had the following meanings. First of all, legally, it was meaningful in that the concept of cultural property or intangible cultural property was used for the first time in Korea in laws and regulations on the term of office of professional members. These matters became the basis for the operation of the current Cultural Heritage Protection Act and the Cultural Heritage Committee. The following confirms that, unlike previously known activities, they were active despite political upheaval at the time. In spite of rapid regime change at the time, the committee had no change in its members, and the meetings continued without interruption. At that time, there was an exclusive relationship between different groups in relation to the preservation of cultural heritage, and this relationship was confirmed by the minutes that disappeared with the establishment of the Cultural Heritage Management Bureau, which integrated these groups. Finally, the form of the minutes prepared then shows the form of documentation at the time, where it is confirmed that the traditional documentation format is changing into a new form. It can be good research material in terms of modern and contemporary bibliography. As discussed earlier, the Cultural Heritage Conservation Committee of 1961 has historical significance in terms of legal and actual activities. The reason why the committee's activities were low valued is presumed to be that the minutes and related documents prepared at the time were not organized well due to the lack of a related administrative system. The minutes of the Cultural Heritage Conservation Committee record various facts about cultural heritage policies and decisions at that time. Therefore, analysis and research on these contents can reveal more facts about the cultural heritage policies and perceptions of that time.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.224-235
• /
• 2023

South Korea is the only divided nation globally, marked by a military demarcation line establishing demilitarized and civilian control zones, ensuring national security. Consequently, these areas exhibit relatively minimal ecological disruption compared to other regions. However, the threat to safety persists due to the presence of unexploded ordnances and landmines, imposing significant constraints on ecological research. To address this, we conducted a comparative study utilizing eDNA analysis as a supplementary and alternative approach within three points of the "Road of Peace" - Inje, Yanggu, and Hwacheon courses, located within the civilian control zone. Direct surveys and indirect eDNA sampling were carried out in May, July, and September of 2022. Genetic material obtained from the samples underwent amplification, library preparation, MiSeq sequencing, and subsequent ASV generation for indirect analysis. These results were then compared with the findings of direct surveys. Our findings revealed the detection of eDNA for both observed species at the Yanggu-1 point, and for two out of four species at Yanggu-2. Hwacheon-1 displayed the detection of eDNA for one out of one observed species, whereas Hwacheon-2 yielded seven out of twelve, Hwacheon-3 showed four out of six, and all one observed species at Hwacheon-4 exhibited eDNA detection. Consequently, approximately 69% of the fish species identified through direct surveys were confirmed by indirect eDNA analysis. It is necessary to verify if certain fish species, such as the continental trout and catfish, have genetic information registered in the NCBI database. Additionally, it is believed that further marker development research utilizing different genetic sequences is essential. Given the limitations imposed by the hazardous nature of the surveyed civilian control zone, eDNA analysis proves to be a suitable supplement for fish research in the area.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.168-177
• /
• 2008

Trafficablility of a miner and potential environmental impacts due to mining activities should be considered in the selection of a commercial manganese nodule mining site. These two factors can be evaluated comparatively with physical properties and shear strength of sea-bed sediments. For the qualitative comparison of potential minig sites in terms of these two factors, physical properties such as water contents, void ratios, porosities, and grain densities, and shear strengths of surface sediments were determined for the three potential manganese nodule mining sites(KR1, KR2, and KR5) in the Korean manganese nodule contract area, northeast Pacific. For the study, sediment samples were collected from 107 stations from 2004 to 2006. The physical properties of surface sediments showed more significant differences between northern(KR1, KR2) and southern(KR5) blocks than between northern blocks(KR1 vs. KR2). Water content, void ratio, and porosity of sediments from KR5 were relatively higher than those from KR1 and KR2. Grain density of sediments from KR5 was relatively lower than those from KR1 and KR2. Shear strengths of the top 10cm sediments were higher in KR1 and KR2, whereas those of the deeper part were highest in KR5 block. Generally, sediments of high water contents are less suspendible than those of the low water contents by benthic disturbances, thus less disturbance is expected in the sediments of high water content by mining activities. In terms of trafficability, the shear strength of sediment below 10 cm deep is more important than shallower part because miner will disturb at least top 10 cm interval of the surface sediments. Base on these results, we conclude that KR5 area will be the best site for commercial mining among three investigated sites in this study.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.118-126
• /
• 2024

Recently, the alternative meat (food) market is growing rapidly due to the increase in meat consumption due to global population growth and income improvement, as well as issues such as equal welfare, carbon neutrality, and sustainability. The government is also developing a green bio convergence new industry development plan to foster alternative foods, but there are difficulties in commercialization due to the lack of technology and insufficient production facilities among domestic small and medium-sized enterprises, so it is necessary to build joint utilization facilities and equipment to resolve the difficulties faced by companies. am. In addition, small and medium-sized enterprises are having difficulty developing and commercializing plant-based meat substitutes due to a lack of technical skills, and related equipment is expensive, making it difficult to build equipment on their own. Accordingly, Jeollabuk-do is pursuing a strategy to secure the source technology for development, processing, and industrialization of plant-based substitute meat at the level of developed countries by establishing a plant-based alternative meat industrialization center. In this study, an economic feasibility analysis study was conducted when a plant-based alternative meat industrialization center is built in Jeollabuk-do. As a result of the analysis, B/C=1.32, NPV=374 million won, and IRR=4.8%, showing that there is economic feasibility in establishing an alternative meat industrialization center. In addition, as a result of analyzing the regional economic ripple effect resulting from the establishment of an industrialization center, if 38 billion won is invested in Jeollabuk-do, the nationwide production inducement effect is 74 billion won, the added value inducement effect is 29.8 billion won, and the employment inducement effect is 672 people

• Korean Journal of Environment and Ecology
• /
• v.38 no.1
• /
• pp.90-107
• /
• 2024

This study analyzed the status of urban agricultural regulation of metropolitan governments on supporting multi-dimensional values to suggest a direction for improving urban agriculture regulations. Moreover, a Delphi survey was conducted to derive ways to identify improvement opportunities for functions that showed relatively insufficient support for urban agricultural regulations. As a result of the study, 12 out of 17 metropolitan governments and 116 of 226 municipalities have enacted urban agricultural regulations. However, the enactment of urban agricultural regulations has generally declined since 2011. Analysis of the contents of the urban agricultural regulations showed that they focused on matters relating to the creation and expansion of the foundation of urban agriculture. Among the multi-dimensional values of urban agricultural regulations, the foundation for supporting the securing of green spaces and utilizing food production functions was most widely available. On the other hand, the foundation for support of resource recycling, healing and health, social welfare, economic imbalance mitigation, and job creation functions has been shown to be relatively insufficient. A Delphi survey conducted to determine potential measures to improve urban agricultural regulations to support these functions found that 17 of the 18 ordinance improvement measures were valid. Therefore, to revitalize the multi-dimensional values of urban agriculture, it is first necessary to enact new ordinances. Also, to revitalize the multi-dimensional values of urban agriculture evenly, it is necessary to revise the ordinances to include resource recycling, healing and health, social welfare, mitigation of economic imbalances, and job creation functions. In this process, the development of urban agriculture technology, legal review of various urban farming spaces, and fostering of industries related to urban agriculture are necessary. Above all, steady interest in the multi-dimensional values of urban agriculture and the efforts of local governments to foster urban agriculture must be supported.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.197-214
• /
• 2024

This study aimed to investigate students' perceptions at science and technology specialized universities towards entrepreneurship support policies and to derive policy improvement measures by applying a bottom-up approach to reflect the requirements of the policy beneficiaries, i.e., the students. Specifically, the research explored effective execution strategies for student entrepreneurship support policies through a survey and analysis of KAIST students. The findings revealed that KAIST students recognize the urgent need for improvement in sharing policy objectives with the student entrepreneurship field, reflecting the opinions of the campus entrepreneurship scene in policy formulation, and constructing an entrepreneurship-friendly academic system for nurturing student entrepreneurs. Additionally, there was a highlighted need for enhancement in the capacity of implementing agencies, as well as in marketing and market development capabilities, and organizational management and practical skills as entrepreneurs within the educational curriculum. Consequently, this study proposes the following improvement measures: First, it calls for enhanced transparency and accessibility of entrepreneurship support policies, ensuring students clearly understand policy objectives and can easily access information. Second, it advocates for student-centered policy development, where students' opinions are actively incorporated to devise customized policies that consider their needs and the actual entrepreneurship environment. Third, there is a demand for improving entrepreneurship-friendly academic systems, encouraging more active participation in entrepreneurship activities by adopting or refining academic policies that recognize entrepreneurship activities as credits or expand entrepreneurship-related courses. Based on these results, it is expected that this research will provide valuable foundational data to actively support student entrepreneurship in science and technology specialized universities, foster an entrepreneurial spirit, and contribute to the creation of an innovation-driven entrepreneurship ecosystem that contributes to technological innovation and social value creation.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.217-226
• /
• 2024

This study aimed to investigate the influence of anions in the air on the purification of fine dust (PM10 and PM2.5) and to evaluate the effects of plants on the generation of anions in the air and the purification of fine dust. Subsequently, the fine dust reduction models were compared according to each factor and plant volume. The characteristics of anion generation by each factor were observed to be in the order of Type N.I (negative ion generator; 204,133.33 ea/cm³) > Type P₃₀ (plant vol. 30%; 362.55 ea/cm³) > Type C (control; 46.22 ea/cm³), indicating that the amount of anion generation in the anion generator treatment group and the plant arrangement group were approximately 4,417 times and 7 times higher, respectively, than that in the untreated group. Consequently, the fine dust reduction characteristics by anion generation source showed that for PM10, Type NI had a purification efficiency 2.52 times higher than Type C, and Type P₃₀ was 1.46 times higher, while for PM2.5, Type NI had a purification efficiency 2.26 times higher than Type C, and Type P₃₀ was 1.31 times higher. The efficiency of fine dust purification by plant volume was in the order of Type P₂₀ (84.60 minutes) > Type P₃₀ (106.50 minutes) = Type P₂₅ (115.50 minutes) = Type P₁₅ (117.60 minutes) > Type P₅ (125.25 minutes) = Type P₁₀ (129.75 minutes), and for ultrafine dust, Type P₂₀ (104.00 minutes) > Type P₃₀ (133.20 minutes) = Type P₂₅ (144.00 minutes) = Type P₁₅ (147.60 minutes) > Type P₅ (161.25 minutes) = Type P₁₀ (168.00 minutes). Thus, a quantitative analysis of the anions and plants for purifying fine dust and suggested matters to be considered for future green space planning and plant planting considering fine dust purification.