• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.851-859
• /
• 2008

To promote the adoption of healthier eating patterns, this study was aimed to develop and evaluate alternative front of pack nutrition signposting concepts. Based on previous research, we developed two signposting concepts, Multiple Traffic Light (MTL) and Multiple Traffic Light with % Daily Value (MTL-%DV). The signposts featured three key nutrients, total sugar, saturated fat, and sodium. Actual food packaging with no front of pack signposting (NoSP) was included in the evaluation to act as a benchmark against which to compare the performance of the different signposting options. Using an interviewer administered method, we assessed the degree of understanding and time to interpret on a total of 534 subjects (194 elementary, 108 middle, and 103 high schoolers, 128 adults). In the individual product evaluations, MTL (87.0%) obtained the highest level of correct responses, followed by MTL-%DV (83.1%) and NoSP (52.2%). Except for signposting concepts, age, gender and living area were not associated with the degree of correct responses in multivariate analyses. When used to compare products with different colors of nutrient contents, correct responses were more than 90% for MTL-%DV (91.5%) and MTL (90.3%). The middle and high schoolers revealed the lower likelihood of correct response compared to the other two groups. In case of comparing products with same colors of nutrient contents, the proportion of correct responses was the highest in NoSP (90%), followed by MTL%DV (77.4%) and MTL (48.5%). In terms of time to interpret, MTL-%DV and MTL performed better than NoSP in the individual product evaluation and the comparison of two products with different colors of nutrient contents. NoSP performed the best in the comparison of two products with same colors of nutrient contents. A majority of the participants preferred MTL-%DV (78%) most and thought it the most useful in helping them make healthier food choices. Based on these findings, MTL-%DV was considered to most closely meet the objectives of the initiatives.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Journal of Korea Water Resources Association
• /
• v.40 no.9
• /
• pp.677-685
• /
• 2007

The objective of this study is to evaluate the applicability of multi-objective genetic algorithm(MOGA) in order to calibrate the parameters of conceptual rainfall-runoff model, Tank model. NSGA-II, one of the most imitating MOGA implementations, is combined with Tank model and four multi-objective functions such as to minimize volume error, root mean square error (RMSE), high flow RMSE, and low flow RMSE are used. When NSGA-II is employed with more than three multi-objective functions, a number of Pareto-optimal solutions usually becomes too large. Therefore, selecting several preferred Pareto-optimal solutions is essential for stakeholder, and preference-ordering approach is used in this study for the sake of getting the best preferred Pareto-optimal solutions. Sensitivity analysis is performed to examine the effect of initial genetic parameters, which are generation number and Population size, to the performance of NSGA-II for searching the proper paramters for Tank model, and the result suggests that the generation number is 900 and the population size is 1000 for this study.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.117-129
• /
• 1988

Packaged meal manufacturing establishments in Seoul city and Kyungkido province were assessed in terms of the sanitary conditions and practices, time and temperature, and microbiological quality. Sanitary check-lists were developed to evaluate the sanitary condition of sampled packaged meal manufacturing establishments. Microbiological tests on.food containers, equipments, and foods in various phases of product flow were done. The results of the study are summarized as follows; 1) Sanitary condition of kitchen.and sanitary practices of employees in.large and medium establishments were evaluated as the some improvement required in order to meet all standards. But sanitary practices of employees in small establishments were evaluated as the unsatisfactory state with negligence or ignorance of safe practice. 2) The microbiological quality of basic ingredients and food materials after pre-preparation were poor. 3) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, assembly and packaging before delivery were critical. 4) Microbiological test results for food containers, equipments indicated that sanitary conditions of stainless steel ware, knife, wiping clothes and cutting board should be improved promptly. 5) Critical control points identified were ingredients, pre-preparation, Holding, and assembly and packaging. 6) Guidelines were suggested for effective quality control of packaged meals production.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.435-435
• /
• 2012

농경지 중에서 밭은 논보다 농약 비료 사용률이 매우 높기 때문에 논에 비해 비점오염물질 배출량이 훨씬 심각한 것으로 조사되고 있어 밭경지 비점오염저감기법 개발 및 체계적인 제어대책 수립이 무엇보다도 절실하다. 현재 선진국을 중심으로 다양하게 제시되고 있는 밭경지 비점오염 제어기법들 중 초생대에 대한 성공적 연구사례 및 적용사례에 대한 자료가 상당히 많이 제시되고 있으나, 우리나라의 경우 초생대를 적용한 밭경지 비점오염저감에 대한 기술개발 및 체계적인 연구가 아직 미비한 실정이다. 따라서 본 연구는 초생대의 현장설치 및 모니터링을 통해 초생대의 비점오염부하 저감효과에 대한 기초조사를 실시하고 우리나라 밭경지에서의 적용가능성을 알아보고자 한다. 초생대 현장 실험을 위한 시험포는 경상북도 군위군 효령면에 위치한 경북대 농생대 부속농장 밭경지 $1,500m^2$ (455평)를 선정하였다. 시험포는 1개의 대조구와 6개의 처리구로 구성하였으며, 각 시험구의 크기는 길이 12m ${\times}$ 폭 4m (초생대 길이 2m ${\times}$ 폭 4m 포함)로 하였다. 초생대 조성을 위한 초종선정은 초생대 조성이 용이하고 관리효율성이 높은 초종으로서 손쉽게 구할 수 있고, 우리나라 기후와 토양특성에 적합하며 초생대 기능에 부합한 것으로 선정하였다. 초생대 시험포장에 재배할 작물은 우리나라 대표 밭작물인 콩으로 선정하였으며, 작물재배를 위한 퇴비, 비료, 제초제 등은 농촌진흥청에서 제시한 표준재배법에 준하여 시용하였다. 초생대 비점오염저감효과를 평가하기 위해서 시험포장에 플륨, 수위계, 강우계 등으로 구성된 모니터링시스템을 설치하였으며, 플륨의 수위-유량 캘리브레이션을 실시하였다. 실험을 위해 2회의 인공강우와 1회의 자연강우에 대한 모니터링을 실시하였다. 그 결과 초생대 조성이 유출률에 상당한 영향을 미치는 것으로 조사되었다. 인공강우의 경우 초생대 설치에 따라 유출률의 범위가 14.5~95.8% 정도로 감소되는 현상을 보였으며, 자연강우에서도 6.1~11.3% 정도의 유출률 감소를 보였다. 초생대 시험구별 유출률에 차이를 나타낸 이유는 현장실험시의 시험구별 지면조건과 초생대 초종별 특성(초장, 경경, 밀도 등)의 차이에 기인한 결과로 사료되었다. 비점오염저감효과 측면에서는 기존 밭농사 방식을 그대로 채택한 대조구에 비해 초생대 시험구에서 TS의 경우 15.6~90.3%, T-P의 경우 49.9~87.8%, T-N의 경우 6.7~91.1%의 저감율을 각각 나타내었다. 이러한 결과들을 통해 초생대 기법이 우리나라 밭경지 비점오염부하를 저감시키는데 유용하게 활용될 수 있을 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.47-56
• /
• 2020

In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.190-201
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four esthetic restorative materials in an alkaline solution. The brands studied were Charmfil, Charmfil flow(composite resin), Compoglass F and PrimaFlow(compomer). The results were as follows: 1. The mass loss were not significantly different among the materials(p>0.05). 2. The sequence of the degree of degradation layer depth was in descending order by Compoglass F, PrimaFlow, Charmfil, and Charmfil flow. There were significant differences between Compoglass F and the others(p<0.05). 3. The sequence of the Si loss was in descending order by Charmfil flow, Charmfil, PrimaFlow, and Compoglass F. There were significant differences among these materials(p<0.05). 4. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. 5. The sequence of maximum wear depth was in descending order by Comfoglass, PrimaFlow Charmal, and Charmfil flow. There were significant differences among these materials(p<0.05). 6. The correlation coefficient between Si loss and degradation layer depth (r=0.602, p<0.05) Vicker's hardness number and maximum wear depth (r=0.501, p<0.05) were relatively high. These results indicate that wear and hydrolytic degradation may be considered to be evaluation factors of composite resins and compomers.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.82-87
• /
• 1995

The standardization of test procedures and reproducibility of the toxicity data are prerequisite for the toxicity testing with the earthworm culturing in the laboratory. No in-depth study on culturing conditions of earthworms has been conducted in Korea, even of massive cultural practice is common for composting and production of biochemicals. The earthworms, Lumbricus rubellus and Eisenia foetida, were cultured in three kinds of artificial soil substrates(I, II and III) based on the OECD Guideline, which consist of different ratios of components (sand, sphagnum peat and kaolinite), and fed with a mixture of grain powders. During the period of culturing, the body weight and reproduction parameters were measured. L. rubellus showed the best results for increasing body weight and cocoon production in the artificial soil substrate(I) compared with E. foetida. The cocoon production was significantly high in both species cultured in the artificial soil substrate(I) among the three kinds of soil substrates, but the cumulative cocoon production of L. rubellus was 11 cocoon per worm compared with 3.7 cocoons per worm of E.foetida. L. rubellus, therefore, was more prolific than E. foetida in these culture schemes. The cumulative mortality in both species was less than 10%, and the number of juvenile worms per cocoon ranged from 1.5 to 2.3 and thus did not show any relationships with soil substrates or species. From these data, the culture of L. rubellus in the laboratory could be standardized, but for E. foetida, further study would be necessary to establish the optimal growth conditions in the laboratory.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.154-162
• /
• 1992

Two major goals for chemical cleaning on the secondary side of nuclear steam generators are to remove sludge effectively and to minimize corrosion of base metals. In this work, electrochemical and sludge dissolution behaviors have been investigated in order to find out which parameters are critical and important during a copper removal process for chemical cleaning and to evaluate safety aspects and effectiveness of two major copper removal processes developed commercially in foreign countries. Hydrogen peroxide is vert effective for the process to use EDTA, NH$_4$OH and EDA at 38$^{\circ}C$ to control the potential of copper in a potential range sood for copper sludge removal. Corrosion rates for carbon steel SA 285 Gr.C and Alloy 600 are very small during this process if it is controlled properly. However, the corrosion rate of SA 285 Gr.C will be increased greatly if its corrosion potential is maintained below -450mV. The process to use EDA and ammonium carbonate is effective at 6$0^{\circ}C$ to dissolve copper sludge if the corrosion potential of copper can be controlled above -200mV. However, it is very difficult to raise the corrosion potential of copper to this range by air blowing and stirring.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2011

Recently, the visual grading rule of Korea Forest Research Institute (KFRI) was revised and it is necessary to investigate the distribution characteristics of visual graded lumber in accordance with the revised rule. Therefore, in this study, the distribution characteristics of bending strength was investigated with revised visual grading rule and changed prior rule, respectively. The size of specimens was $38{\times}140{\times}3,000$ (mm) and the species were $Larix$ $kaempferi$ and $Pinus$ $koraiensis$. The moisture content was under 18% and the specimens were tested in accordance with ASTM D-198. The number of No. 1 and 2 grades, suitable for structural lumber, was increased when the revised visual grading rule was applied. Moreover, the revised rule was more effective to distinguish sharply between No. 1 and 2 grades and below No. 3 grade. Meanwhile, the lower 5% exclusion limit and allowable stresses were generally decreased when revised visual grading rule had been applied. However, the announcement of Korea Forest Service, tested with small clear specimen, was much lower than the allowable stresses of this test, tested with structural lumber. Therefore, the revision of allowable design values should be considered for more exact use and effective structural design.