• Information Systems Review
• /
• v.16 no.2
• /
• pp.1-23
• /
• 2014

With side effects such as Phishing and Spam using personal information in Social Network Service, there is a growing need for studies related to harmful behaviors such as the reason for privacy violation. As such, this study assumed privacy violation to be ethical decision, making behavior and used the Theory of Planned Behavior and Motivation Theory, which are mostly used in social science to identify the factors affecting privacy violation. The results suggested that the Perceived Enjoyment and Punishment used in motivation studies affected privacy violation behaviors, and that the factors of the Theory of Planned Behavior such as Attitude toward Privacy Violation, Subjective Norms of Privacy Violation, and Perceived Behavioral Control with regard to Privacy Violation significantly influenced the Intention to Privacy Violation. On the other hand, Perceived Curiosity and Subjective Norms of Privacy Violation did not affect the Intention to Privacy Violation. Therefore, this study confirmed that the Theory of Planned Behavior was appropriate to explain the Intention to Privacy Violation, and that the variables of the Motivation Theory generally influenced the Attitude toward Privacy Violation. This study was significant since it extended the scope of theoretical privacy study from users and victims centered to inflictor and applied the Extended Theory of Planned Behavior using the variables of the Motivation Theory in the study of Intention to Privacy Violation. From the practical aspect, it provided the ground for privacy education based on the fact that the Attitude toward Privacy Violation can be curbed when education on the Privacy Concerns, Perceived Enjoyment, and Punishment with regard to privacy is strengthened. It also cited the need for the punishment of privacy violation and the practical ground to amend the terms and conditions of user license and Personal Information Protection Act to provide policy support.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.315-324
• /
• 2007

The fast development of the information technology makes Korea one of the most advanced countries in information communication in the world in a short period of time. However, the gap between the aged and the young has been seriously increased. Those who are less than 10% of the older adults are using the internet at present. It means the elderly has many difficulties in using the internet because of their physical and cognitive differences. The purpose of this study is that the aged can easily achieve and use information by developing a guidelines for the Korean typography in the web interface. A literature search was conducted on the web interface design guidelines for older adults. These guidelines were classified by interface component and the study subjects needed for the Korean internet environment were selected. The subjects are a more comfortably readable typeface according to the sizes, a proper text size of Gulim and Batang, a more comfortably readable leading size, the appropriate letter spacing, the proper line length of body, the suitable size proportion between a title and a body, and a more comfortably readable text alignment. Survey questions were made and these Questions were improved after the pretest. Both online and offline survey programs were written and the aged and the young were tested with these programs. The result of this survey shows that there are satisfaction differences between the aged and the young in the readability and legibility of the web contents. Therefore these universal guidelines to be used in the Korean typographical environment for the future aged population were specified. It is expected that this study will be used as basic data for the universal web interface where the older adults can easily use and acquire information.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.257-266
• /
• 2005

The purpose of this study is to investigate the psychological reaction to the image of the worship space in the church buildings and to quantify its contribution of the stimulation elements causing such reaction, and finally to suggest basic data for realizing emotional worship space of the church architecture. For this, 143 christians were surveyed to analyze the relationship between 23 emotional expressions extracted from the worship space and 32 images of the worship space. The combined data was described with the two dimensional dispersion using the quantification theory III. The analysis found out that 'simplicity-complexity' of the image consisted of the horizontal axis (the x-axis) and 'creativity' of the image the vertical axis(the y-axis). In addition, to extract the causal relationship between the value of emotional reaction and its stimulation elements quantitatively, the author indicated 4 emotional word groups such as simple, sublime for x-axis and typical creative for y-axis based on its similarity by the cluster analysis, The quantification theory I was also used with total value of equivalent emotional words as the standard variance and the emotional stimulation elements of the worship space as the independent variance. 9 specific examples of the emotional stimulation elements were selected including colors and shapes of the wall and the ceiling, shapes and finish of the floor materials, window shapes, and the use of the symbolic elements. Furthermore, 31 subcategories were also chosen to analyse their contribution on the emotional reaction. As a result, the color and finish of the wall found to be the most effective element on the subjects' emotional reaction, while the symbolic elements and the color of the wall found to be the least effective. It is estimated that the present study would be helpful to increase the emotional satisfaction of the users and to approach a spatial design through satisfying the types and purposes of the space.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.105-115
• /
• 2002

For many rears, traffic accident statistics are the most direct measure of safety for a signalized intersection. However it takes more than 2 or 3 yearn to collect certain accident data for adequate sample sizes. And the accident data itself is unreliable because of the difference between accident data recorded and accident that is actually occurred. Therefore, it is rather difficult to evaluate safety for a intersection by using accident data. For these reasons, traffic conflict technique(TCT) was developed as a buick and accurate counter-measure of safety for a intersection. However, the collected conflict data is not always reliable because there is absence of clear criteria for conflict. This study developed objective and accurate conflict criteria, which is shown below based on traffic engineering theory. Frist, the rear-end conflict is regarded, when the following vehicle takes evasive maneuver against the first vehicle within a certain distance, according to car-following theory. Second, lane-change conflict is regarded when the following vehicle takes evasive maneuver against first vehicle which is changing its lane within the minimum stopping distance of the following vehicle. Third, cross and opposing-left turn conflicts are regarded when the vehicle which receives green sign takes evasive maneuver against the vehicle which lost its right-of-way crossing a intersection. As a result of correlation analysis between conflict and accident, it is verified that the suggested conflict criteria in this study ave applicable. And it is proven that estimating safety evaluation for a intersection with conflict data is possible, according to the regression analysis preformed between accident and conflict, EPDO accident and conflict. Adopting the conflict criteria suggested in this study would be both quick and accurate method for diagnosing safety and operational deficiencies and for evaluation improvements at intersections. Further research is required to refine the suggested conflict criteria to extend its application. In addition, it is necessary to develope other types of conflict criteria, not included in this study, in later study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.127-136
• /
• 1998

On-line geometrical quality assurance system has been developed using electronic portal imaging system(OQuE). EPID system is networked into Pentium PC in order to transmit the acquisited images to analysis PC. Geometrical QA parameters, including light-radiation field congruence, collimator rotation axis, and gantry rotation axis can be easily analyzed with the help of graphic user interface(GUI) software. Equipped with the EPID (Portal Vision, Varian, USA), geometrical quality assurance of a linear accelerator (CL/2100/CD, Varian, USA), which is networked into OQuE, was performed to evaluate this system. Light-radiation field congruence tests by center of gravity analysis shows 0.2～0.3mm differences for various field sizes. Collimator (or Gantry) rotation axis for various angles could be obtained by superposing 4 shots of angles. The radius of collimator rotation axis is measured to 0.2mm for upper jaw collimator, and 0.1mm for lower jaw. Acquisited images for various gantry angles were rotated according to the gantry angle and actual center of image point obtained from collimator axis test. The rotated images are superpositioned and analyzed as the same method as collimator rotation axis. The radius of gantry rotation axis is calculated 0.3mm for anterior/posterior direction (gantry 0$^{\circ}$ and 170$^{\circ}$) and 0.7mm for right/left direction(gantry 90$^{\circ}$ and 260$^{\circ}$). Image acquisition for data analysis is faster than conventional method and the results turn out to be excellent for the development goal and accurate within a milimeter range. The OQuE system is proven to be a good tool for the geometrical quality assurance of linear accelerator using EPID.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.53-74
• /
• 2018

Since South Korea has an economic structure that has a characteristic which market-dependent on overseas, the tourism industry is considered as a very important industry for the national economy, such as improving the country's balance of payments or providing income and employment increases. Accordingly, the necessity of more accurate forecasting on the demand in the tourism industry has been raised to promote its industry. In the related research, economic variables such as exchange rate and income have been used as variables influencing tourism demand. As information technology has been widely used, some researchers have also analyzed the effect of media on tourism demand. It has shown that the media has a considerable influence on traveler's decision making, such as choosing an outbound destination. Furthermore, with the recent availability of online information searches to obtain the latest information and two-way communication in social media, it is possible to obtain up-to-date information on travel more quickly than before. The information in online media such as blogs can naturally create the Word-of-Mouth effect by sharing useful information, which is called eWOM. Like all other service industries, the tourism industry is characterized by difficulty in evaluating its values before it is experienced directly. And furthermore, most of the travelers tend to search for more information in advance from various sources to reduce the perceived risk to the destination, so they can also be influenced by online media such as online news. In this study, we suggested that the number of online media posting, which causes the effects of Word-of-Mouth, may have an effect on the number of outbound travelers. We divided online media into public media and private media according to their characteristics and selected online news as public media and blog as private media, one of the most popular social media in tourist information. Based on the previous studies about the eWOM effects on online news and blog, we analyzed a relationship between the volume of eWOM and the outbound tourism demand through the panel model. To this end, we collected data on the number of national outbound travelers from 2007 to 2015 provided by the Korea Tourism Organization. According to statistics, the highest number of outbound tourism demand in Korea are China, Japan, Thailand, Hong Kong and the Philippines, which are selected as a dependent variable in this study. In order to measure the volume of eWOM, we collected online news and blog postings for the same period as the number of outbound travelers in Naver, which is the largest portal site in South Korea. In this study, a panel model was established to analyze the effect of online media on the demand of Korean outbound travelers and to identify that there was a significant difference in the influence of online media by each time and countries. The results of this study can be summarized as follows. First, the impact of the online news and blog eWOM on the number of outbound travelers was significant. We found that the number of online news and blog posting have an influence on the number of outbound travelers, especially the experimental result suggests that both the month that includes the departure date and the three months before the departure were found to have an effect. It is shown that online news and blog are online media that have a significant influence on outbound tourism demand. Next, we found that the increased volume of eWOM in online news has a negative effect on departure, while the increase in a blog has a positive effect. The result with the country-specific models would be the same. This paper shows that online media can be used as a new variable in tourism demand by examining the influence of the eWOM effect of the online media. Also, we found that both social media and news media have an important role in predicting and managing the Korean tourism demand and that the influence of those two media appears different depending on the country.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.643-664
• /
• 2004

This study aims to review what geographers have contributed to GIS industries and national needs. To-be-geographers and geographers are expected to meet the gap between what we have teamed in school and what we have to do after graduation. The characteristics of GIS industry in the 1990 are summarized with approximate evaluation of the contribution of geographers in each stage. Author introduced the requirement for the licenses of geomatics and geospatial engineering experts and the other licenses, which are important to get a job in GIS industry from 2003 to 2004. A set of questionnaire on the user's requirements was given to GIS people in private companies and public GIS research centers and analyzed. Author found that they put an emphasis on hands-on experiences and programming skills. no advantages or geography such as capability or integration and inter-disciplinary collaboration were not appreciated. The prospects for the GIS tend to be positive but the reflectance of the prospect was not accompanied by at the same degree of preference for geography. Most government strategies for the next ten years' GIS focus on new-growth leading industries. SWOT(strength, weakness, opportunity, threat) analysis of geography for GIS industry will give some directions such as telematics, regional marketing strategies with web-based GIS technology, location based service. That means intra-disciplinary study in geography will evoke the potentiality of GIS, compared with interdisciplinary studies.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.3
• /
• pp.75-86
• /
• 2017

The development of web technologies and the generalization of smartphones have dramatically increased the number of social media users using the Internet. As a result, companies are perceived social media as a major marketing tool and operate a variety of SNS channels. In particular, start-ups conducting businesses with limited resources, social media is being used as an effective marketing tool to meet many potential customers at a low cost. Among them, facebook is the most used channel in the world and plays an important promotional tool not only in overseas but also in marketing activities of domestic start-ups. The purpose of this study is to analyze the relationship between satisfaction and purchase intention according to four personal characteristics of users who use social media contents and to measure the mediating effect of satisfaction on the relationship between content type and purchase intention. To this end, we classified into three types based on the previous research, and social media content is provided to 200 fans of Minbak Danawa(Minda), one of representative start-ups related to accommodation, The questionnaires were conducted for 3 weeks, and a total of 145 copies were collected. All the collected questionnaires were used for statistical analysis through SPSS 18.0. The empirical results show that all three types of content, such as task-oriented, self-oriented, and interaction-oriented, have a significant effect on the satisfaction level. Among them, it is confirmed that the satisfaction level plays a mediating role on the relationship between task-oriented contents and purchase intention. And the user 's personal characteristics showed a partially moderate effect on the satisfaction according to the content type. Therefore, social media content provided by corporations has an important effect on consumer satisfaction and purchasing, in order for start-up to prevail in the market, it is necessary to have an operational strategy to communicate with customers continuously through systematic contents analysis and planning. The result of this study suggests effective ways to build a social media marketing strategy for start-ups and suggests ways to utilize contents considering the characteristics of internet users.