• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.111-122
• /
• 1997

Provenance type and paleoclimate of the Jinju and Iljig formation were studied on the basis of compositions of sandstones from the western Euiseong area in the northern part of Kyong-sang basin. The average compositions of quartz, feldspar and lithic grain(Q:F:L) from the sandstones are 53:40:7 and 50:46:4 for Jinju and Iljig formations, respectively. The values fall into the arkosic arenite field. Petrographic detrital modes of the sandstones mainly suggest transitional continental block for the tectonic setting of the provenance. All sandstones from the Jinju and IIjig formations show chemical compositions close to average values of arkose(Pettijohn, 1975). $Na_2O$ contents is relatively high. $Fe_2O_3$(total iron) and MgO contents decrease with increasing $SiO_2$ contents since the framework grains of arkoses supposed to be derived from granitic rocks are poor in ferromagnesian minerals. The detrital framework grains still possess climatic signs even though the grains were more or less altered during deep burial. Bivariant plot of Suttner and Dutta(1986) suggests semi-arid to semi-humid paleoclimate during the deposition of the Jinju and Iljig sandstones.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.277-288
• /
• 1985

Mineral composition and grain size analyses of the sandstone from the Early Jurassic Daedong Group distributed in Mungyeong, Daecheon, Kimpo and Yeoncheon areas were made for the study of provenances and depositional environments. The most of the analyses are obtained from Mungyeong area, with some preliminarly works from Daecheon, Kimpo and Yeoncheon areas. All sandstones from the study area are characterized by high content of quartz ranging from 59.8 to 87.2 percent of total constituents. Many of quartz which has rounded dust ring seems to come from aeolian sediments. Content of feldspar is very low except Daecheon area where it ranges from 1.8 to 10.0 percent. Sandstones from Mungyeong, Kimpo and Yeoncheon areas are classified as quartz and quartzose arenite/wacke, while those from Daecheon area are classified as quartzose and lithic arenite/wacke. According to the character of the sandstones, provenance could be quartzose sandstone and quartzite. Results of grain size analysis of C-M and sorting versus skewness suggest that depositional environment seems to be fluvial, while log-probability curve pattern lacustrine environment. It is hard to derive a definite conclusion of sedimentary environment by the grain size analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.75-83
• /
• 2004

Blackening on stone monuments is serious problem, because it is not only aesthetically unattractive, but also an important process in stone deterioration. Black surface layers contain often a large amounts of iron compound. Therefore it is assumed that besides another elements the iron have influence on blackening of surface. After the samples of black surface layers were collected from the stone monuments (Museumsinsel) in Berlin, Germany, especially in this study has been used Mossbauer spectroscopy in order to determine the valence and chemical composition of iron. Mineralogical and chemical analyses were carried out X-ray diffractormetry and X-ray fluorescence method on the black surface layer's samples and original stone samples. The origin of Iron compound in the black surface provides the important clue for the conservation work of stone monuments, like removing of black surface. To find it, black surface layer on white sandstone -it contains very small amount of iron compound- was compared with that on the red sandstone (Fe contains very small amount of iron compound- was compared with that on the red sandstone (Fe abundant). As a results, it is assumed that the iron in black layer on white sandstone is originated mainly from a surrounding environmental material and for the iron in black layer on the red sandstone is responsible the original stone. Even if black surface layer was removed from the red sandstone, some other conservation method should be studied beyond removing of black surface layer, because the iron can move continuously from the inner zone of original stone to surface area.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.123-133
• /
• 2004

Carbonate minerals are examined by cathodoluminescence microscopy and chemical analysis to characterize the carbonate materials occurring in the Tertiary marine basin. The microscopic technique with cathodoluminescence gives new informations that are not obtainable by conventional microscopic techniques. The carbonate cements in sandstones appear to be uniform with transmitted light or with crossed prisms. but the inspection with cathololuminescence reveals foraminiferal tests and rhomb crystals in the carbonate cements. The chemical analysis indicates that the intense luminescence depends mainly on the presence of$ Mn^{ 2+}$ and $Fe^{2+}$ as activator ions, but the $Fe^{2+}$ also acts as an important quencher ion when Fe concentration in dolomite is over 10,000 ppm. The dolomites, which are rich in calcium, are formed at the early stage of diagenesis at a temperature of about 60 ～ $70^{\circ}C$.

• The Korean Journal of Petroleum Geology
• /
• v.3 no.1 s.4
• /
• pp.16-27
• /
• 1995

The Early Miocene Temblor Formation forms an important sandstone reservoir at Kettleman North Dome oil field, California. Sandstones are mostly arkosic in composition except deepest sandstones containing much volcanic rock fragments. Arranged in paragenetic sequence prior to feldspar alteration, the Temblor sandstones contain cements of early calcite, dolomite, quartz, albite, mixed-layer ohloriteismectite (C/S) and smectite, and anhydrite. Diagenetic changes associated with feldspar are albitization of plagioclase, late calcite and laumontite cementation and grain replacement, plagioclase dissolution, and kaolinite cementation. Plagioclase albitization and late calcite and laumontite cementation in Temblor sandstones occurred at the time of maximum burial with temperatures up to $130^{\circ}C$. Volcanic plagioclases were selectively albitized. Most diagenetic changes are interpreted to have occurred before the maior uplift which occurred within the last one million years ago. Since then to the time of hydrocarbon emplacement plagioclase dissolution and kaolinite cementation occurred. This reaction occurred in relatively closed system due to the occurrence of kaolinite next to the site of plagioclase dissolution. Unaltered part of volcanic plagioclase and plutonic plagioclase which escaped albitization during maximum burial were preferentially dissolved to make plagioclase porosity. Secondary porosity resulting from dissolution of plagioclase and carbonate and anhydrite cements was mainly produced by formation waters containing organic acids released during atagenesis of organic matter.

• 한국문화재보존과학회:학술대회논문집
• /
• 2002.02a
• /
• pp.37-44
• /
• 2002

암석이 화학적으로 매우 불균일하기 때문에 암석에 있어서 자연적인 풍화와 인위적인 오염에서 기인한 손상을 구별짓는다는 것은 간단하지 않다. 석재의 화학적인 풍화는 스며든 빗물이나 오염먼지 등에 의해 생성된 물질의 농도변화로 표현되어 진다. 특히 벽면 표면의 두터운 검은 외각과 얇은 검은 막은 미관상으로 뿐만 아니라 암석 자체에도 큰 손상을 끼친다. 일반적으로 이런 검은 물질들은 비 등의 수분과 직접적인 접촉이 없고, 농축된 오염물질들이 쉽게 쌓일 수 있는 곳에서 찾아볼 수 있다. 천연 암석과 마찬가지로 검게 손상된 층 또한 화학적으로 매우 복잡한 체계를 갖고 있어 그 생성 원인과 메커니즘을 규명하는 것이 어려운 일이다. 이 흑색 층은 일반적으로 공기오염물질, 유기물, 철과 망간등의 유색광물의 이동과 침착의 현상에서 생성될 수 있다. 건물들의 외벽에 사용된 여러 종류의 사암과 석회암, 인조석의 표면에는 여러 풍화 손상 형태가 나타나고 있다. 특히 표면에 있는 검은 막의 성질을 알아보기 위해 화학성분을 주성분과 미량성분으로 나누어 측정하였고, 화학적인 특징을 예측하기 위해서 분석자료를 여러 통계적인 방법으로 처리하였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.3
• /
• pp.126-134
• /
• 2001

Several angular sandstone fragments (about 7 cm in longest diameter) occur in two piston cores, obtained from the submarine trough in the northeastern part of Korea Strait. The origin of the sandstone fragments and the paleoenvironment of trough sediment could be suggested from sedimentary facies analysis of cores and identification of ostracod within sandstone fragments. Echo characteristics around two core sites in submarine trough represent the prolonged bottom echoes with diffuse or no subbottom reflectors. The cores consist of a lower bioturbated mud and an upper gravelly sand sediments with sandstone/shell fragments. The bioturbated mud sediments show low water contents (27-44%) and high shear strength (19.2->37 kPa) compared with those of Holocene sediments (60-219% and 1.0-2.7 kPa, respectively) in the inner shelf and continental slope. However, clay contents (48-56%) of the bioturbated mud sediments are similar to those of fluviatile Holocene sediments in the inner shelf. The mean grain size of gravelly sand sediments ranges from 2.3 to 3.0 ${\phi}$ and shows coarsening upward with sandstone/shell fragments. The Holocene palimpsest in the continental shelf are composed of muddy sand sediments or sandy mud sediments (mean grain size: 4.6-7.6 ${\phi}$). Those suggest that two core sediments might be formed from Paleofluvial and paleocoastal deposits during sea-level lowstand. However, sandstone fragments mainly consist of quartz grains and bioclasts, with carbonate matrix, hollow pore, and glauconite. Two extinct ostracod species, Normanicythere sp. and Kotoracythere sp., are recovered in the sand-stone fragments of core EP-7, and they continued to exist from late Pliocene to early Pleistocene in cold water environment of this area. Thus, the sandstone fragments are interpreted to be formed at the paleocoastal environment derived from the Plio-Pleistocene outcrops exposed around the submarine trough during the LGM (Last Glacial Maximum) period.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.171-181
• /
• 2002

Glauconization was investigated by morphological and chemical analysis of glaucony from the Pohang Tertiary marine sediments. The glaucony, which is present sparsely in turbidite sandstones, shows two distinct stages in morphology and chemistry. Crystallization of glaucony starts preferentially from the interior of pellet-like grains, then to the outer region of the grains with increasing K and Fe, and decreasing Al. Furthermore, smectite-like glaucony is evolved into illite-like glaucony through interstratified glauconite-smectite with increases in K and Al, and decrease in Fe.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.85-96
• /
• 2017

Gold mineralization of Samjeong and Yongjang gold mines in Uichang area shows characteristics of Bonanza-type gold deposits. Ores are mainly developed along the contact parts between quartz vein and arkosic sandstone beds(Fe-rich bed) in sedimentary rock. Electrum, silver sulfide and sulfate minerals are mainly in the ores. On the other hand, gold mineralization is less developed in cherty rock and andesitic rock than arkosic sandstone. The study highlights characteristics of gold precipitation in the deposit on the basis of numerical modelling of the reactions between the assumed hydrothermal ore fluids with multicomponent heterogeneous equilibrium calculations. Aqueous species, gases and minerals, containing electrum are included in the calculations. The reaction result between hydrothermal ore fluids and arkosic sandstone show that pH increasing in the ore-forming fluid would trigger precipitation of quartz, chlorite, sericite, chalcopyrite, galena, pyrite, electrum, actinolite and feldspar. The numerical modelling also illustrates the drastic increase of pH and desulfidation lead to precipitation of electrum. Ag/Au ratios in the ore vary with pH conditions and subsequently precipitation of silver-bearing sulfides such as acanthite and polybasite. The modelling of the reaction between andesitic rock and ore-forming fluid shows that mineral assemblages of the case are analogous to ones of the reaction between arkosic sandstone and fluid except the latter has little portion of electrum. The abovementioned modelling results suggest that gold-silver mineralization is bounded by host rocks at the study area.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.100-113
• /
• 2012

The tombstone of Yi Chungmugong in the Joseon Dynasty located Namhae, Gyeongnam is consisted of sandstone. The Bisin and Bijwa of the tombstone have narrow range of magnetic value less than $0.2({\times}10^{-3}SI\;unit)$ and the Isu covered pigment on surface also has same magnetic susceptibility range. Therefore, the composition of all tombstone have similar lithological characteristics. The side of the tombstone appeared fine-grained sandstone to coarse-grained graywacke boundary clearly and back of tombstone observed lamination. Especially deterioration type is concentrated in front and back of the tombstone blistering (8.2% of back), scaling (10.2% of back), granular disintegration (28.1% of back) and discoloration (53.5% of front). Results of contaminants analysis, the front of the Bisin separated in 3 type of surface - granular disintegration-scaling. Among this area, surface detected Ca, S and Cl in high density, but these contaminants elements have more lower detect density from surface to granular disintegration. By contrast, on scaling area, these components are almost not detected, but Fe, K consisted of rock forming elements are detected. It is necessary to conservation and treatment of Yi Chungmugong tombstone in continuously, and salt cleaning on surface also needed. So through activity of conservation and restoration, epigraph preserved for their worth.