• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.57-66
• /
• 2015

A numerical analysis was performed of the seepage from and stability of a mine waste-dump slope in Imgi, Busan, considering rainfall intensity. The 40-45° slope angle of the waste dump is relatively steep, and the depth of the waste dump down to bedrock is 7-8 m. The groundwater level was 6.6 m below the surface. Various laboratory tests on samples obtained from the waste dump were performed to determine the input data for seepage and stability analyses of the waste-dump slope during rainfall. The results of seepage analysis for various rainfall intensities using the SEEP/W program show that the wetting front moved down with increasing rainfall duration. When the rainfall intensity was > 50 mm/ hour and the duration was > 24 hours, the waste dump became fully saturated because the wetting front reached the groundwater level. The results of slope stability analysis coupled with seepage analysis using the SLOPE/W program show that the safety factor of the slope decreased as the wetting front moved down due to rainfall infiltration. After continuous rainfall for 5-6 hours, the safety factor of the slope suddenly decreased but then recovered and converged. The sudden decrease was induced by an increase in pore-water pressure and a decrease in matric suction down to a certain depth as the wetting front approached the potential sliding surface.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.55-60
• /
• 2008

This paper presents how the load transfer mechanism of the ground anchor affects on the stability analysis of anchored slope. The finite element analysis and the conventional limit equilibrium analysis on the anchored slope were performed and compared. The limit equilibrium analysis of the anchored slope is widely used in design practice due to the easiness of the analysis. However, the load transfer mechanism is not considered properly for the analysis. When the failure surface passes through the bonded length of an anchor, the anchor load is disregarded and the factor of safety for the anchored slope is smaller than it should be. In this study, the load transfer distribution was incorporated into the limit equilibrium stability analysis of the anchored slope and the results were compared with those of finite element analysis.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.189-199
• /
• 2006

This paper presents a field study of the stability of slope collapsed during road construction and proposes a reasonable countermeasure if the current slope is unstable. As a result of slope investigation, it was found that the slope includes five tension cracks and the sliding surface is started from the tension crack and propagated the surface soil layer through weathered rock layer. The slope stability analyses are conducted in case of dry and rainfall seasons. The results indicate that the slope is unstable status. A reinforcement method of slope failure should be selected according to the scale of failure. That is, the scale of slope failure, which is classified small, middle and large size determines the reinforcement method of slope. Since the slope interested in this study is large size failure slope, the reinforcement method to control slope failure is selected stabilizing piles, and seed spray and drainage of surface waterare also selected to remain the factor of safety. The SLOPILE (Ver. 3.0) program is applied in order to do stability analysis of slope reinforced by piles. As the result of analysis, the slope reinforced by a row of piles shows the stable state. It is clearly confirmed that the stabilizing of piles can improve the stability of slope.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.5-18
• /
• 2014

Many regions around the world are vulnerable to rainfall-induced slope failures. A variety of methods have been proposed for revealing the mechanism of slope failure initiation. Current analysis methods, however, do not consider the effects of non-homogeneous soil profiles and variable hydraulic responses on rainfall-induced slope failures. In this study, probabilistic stability analyses were conducted for weathered residual soil slopes with different soil thickness overlying impermeable bedrock to study the rainfall-induced failure mechanisms depending on the soil thickness. A series of seepage and stability analyses of an infinite slope based on one-dimensional random fields were performed to consider the effects of uncertainty due to the spatial heterogeneity of hydraulic conductivity on the failure of unsaturated slopes due to rainfall infiltration. The results showed that a probabilistic framework can be used to efficiently consider various failure patterns caused by spatial variability of hydraulic conductivity in rainfall infiltration assessment for a infinite slope.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.39-50
• /
• 2001

In this study, in order to investigate the effects of reinforcement length and vertical spacing on the factor of safety, the road embankment reinforced by geogrid was analyzed using RSS(Reinforced Slope Stability) program based on limit equilibrium analysis. The result by computer analysis showed that the factor of safety for reinforced slope increased with increasing length of reinforcement and with decreasing vertical spacing of reinforcement up to certain limit. Also, numerical analysis by FLAC was performed on reinforced slope to evaluate the horizontal displacement, horizontal stress, and distribution of tensile forces of reinforcements in the cases of several reinforcement length. The results of analysis showed that the critical failure mode was toe failure or slope failure and the effect by the additional reinforcement length on the slope stability was negligible under stabilized condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.365-372
• /
• 2000

현장상황에 대한 불충분한 자료와 파괴 메커니즘에 대한 불완전한 이해로 인해 발생하는 가변성(variability)과 불확실성(uncertainty)은 암반사면공학뿐만 아니라 지반공학에서 흔히 접하게 되는 문제점이다. 특히 암반사면공학에서는 이러한 가변성과 불확실성이 불연속면의 방향 및 기하학적 특성, 그리고 실내실험 결과의 분산으로 나타난다. 그러나 안전율(factor of safety)의 개념을 기초로 하는 전통적인 결정론적 해석방법(deterministic analysis)은 이러한 분산을 고려하지 않은 채 단일 대표 값만을 이용하여 구조물의 안정성을 판단하여 왔다. 확률론적 해석방법(probabilistic analysis)은 이러한 가변성과 불확실성을 효과적으로 정량화하여 해석에 이용할 수 있는 방법 중의 하나로 제안되었다. 이러한 해석방법은 불연속면의 기하학적 특성과 강도 특성을 확률변수(random variable)로 취급하여 신뢰성이론(reliability theory)과 확률이론(probability theory)을 근거로 분석하였으며 이를 기초로 하여 Monte Carlo Simulation과 같은 해석법을 이용, 구조물의 붕괴가능성을 확률로 표현하였다. 확률론적 해석 방법은 기존의 안전율을 대체하여 구조물의 안정성을 붕괴확률(probability of failure)로 제안하였으며 이 붕괴확률은 안전율의 확률분포함수 (probability density function)에서 안전율이 1보다 작을 가능성을 확률로 나타낸 수치이다. 본 논문에서는 확률론적 해석방법을 이용하여 불연속면 특성들의 확률특성을 고찰하였으며 이를 기초로 하여 암반사면의 안정성 해석에 응용했다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.97-102
• /
• 2004

In this paper, a finite element based method far determining factor of safety of slopes which has certain advantages over conventional limit equilibrium methods is described. Particularly, the slope failure behaviour considering different seepage conditions is produced by finite element method using strength reduction technique. It is shown that both the failure mechanism and the safety factor that are analyzed by the FEM using strength reduction technique are an effective means of slope stability analysis. And the stability of a slope with rising water table and rapid drawdown are analyzed and the results are compared with the simplified Bishop Method of the Limit Equilibrium Methods.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.151-155
• /
• 1996

The main purpose of this study was to develop a useful method for analysing slope stability by seepage force. The stability of an embankment impounding a water reservoir is highly depend upon the location of seepage line with the embankment, it is important to illustrate the seepage phenomenon. Of particular interest is the stability following a rapid rise change of reservoir level. Seepage forces in embankments are easily determined if frictional forces are expressed in relation to hydraulic gradient i. Seepage forces can combine with soil weights to improve stability or worsen it, depending on the direction in which the forces act ;n relation to the geometric cross section.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.33-33
• /
• 2016

산사태 발생 예측은 재해를 예방하고 대처하기 위한 가장 근본적이며 효과적인 방법이나, 과학기술의 발전과 많은 노력에도 불구하고 아직 산사태의 발생 장소와 시기를 예측하는 것은 매우 어려운 일이다. 산사태 발생 예측 기법은 크게 경험론적 지수기법, 통계적 해석기법, 물리적 해석 기법으로 나뉠 수 있다. 이 세 방법은 각기 장단점이 있으나 일반적으로 후자로 갈수록 많은 데이터가 요구되고, 해석에 시간이 필요하며, 보다 신뢰할만한 결과를 도출할 수 있다. 경험론적 지수 기법은 국내에서 실무적으로 널리 활용되고 있으며, 통계적 해석기법에 관한 연구도 수행된 바 있다. 하지만 이 두 방법론은 일정량 또는 일정강도 이상의 강우 발생 시 산사태의 발생 위험도를 공간적으로 예측할 수 있으나, 산사태의 발생 시점과 연속적인 강우량 또는 강우강도의 관계를 정량적으로 분석하기 힘든 한계가 있어 최근에는 이러한 한계를 극복하기 위해 최근 무한사면안정 모형과 토양수분침투 모형을 결합한 시변 사면안정모형들이 활용되기 시작하고 있다. 대표적으로는 TRIGRS가 있으며, 이 모형에서는 선형화한 1차원 Richards 방정식의 해석해를 활용하여 토양수분량을 계산한 후 이 정보를 무한사면안정모형에 반영하여 시변적인 사면안정도를 구하고 있다. 하지만 Richards 방정식을 선형화하기 위해서 제한된 토양수분-압력 관계식이 사용되며, GUI가 제공되지 않아 전처리 및 후처리가 번거로운 한계가 있다. 본 연구에서는 이러한 한계를 개선하기 위해 3차원 Richards방정식을 수치적으로 계산하여 보다 다양한 토양수분-압력 모형과 초기조건을 반영할 수 있게 하였다. 또한 GUI를 지원하여 사용자가 보다 손쉽게 해석모형을 사용할 수 있도록 하였다.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.267-274
• /
• 2017

Behavior of rock mass depend on the mechanical properties of intact rock and geometrical property of discontinuity distributed in rock mass. In case of rock slope, particularly, location of slope failure surface and behavior after failure are changed due to discontinuities. In this study, two 3D slope stability analysis methods were developed for two different failure types which are circular failure and planar failure, considering that failure type of rock slope is dependent on scale of discontinuity which was then applied to real rock slope to review the applicability. In case of circular failure, stable condition was maintained in natural dry condition, which however became unstable when the moisture content of the surface was increased by rainfall. In case of planar failure, rock slope become more unstable comparing to dry condition which is attributable to decrease in friction angle of discontinuity surface due to rainfall. Viewing analysis result above, analysis method proved to have well incorporated the phenomenon occurred on real slope from the analysis result, demonstrating its applicability to reviewing the slope stability as well as to maintaining the slope.