• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.98-98
• /
• 2013

완전화 박막이란 사용자가 원하는 용도에 맞게 최적의 성능을 구현하도록 제조된 박막을 의미하며 금속이나 화합물 박막을 제조하되 각종 구조 제어 Tool이나 증착 공정을 변화시켜 나노화와 다층화 또는 치밀화를 통해 구현될 수 있다. 최근 고성능의 증착 및 제어 Tool이 개발되고 빗각증착(Oblique Angle Deposition)이나 스침각 증착(Glancing Angle Deposition) 방법 등의 기술이 개발되면서 사용자 목적에 최적인 박막 소재를 제공하여 User-friendly한 응용을 위한 연구개발이 활발히 진행되고 있다. 완전화 박막 제조에 대한 시도는 1990년대에 일본에서 시작되었다. 일본에서는 산학연이 공동으로 참여하는 NEDO 프로그램을 통해 경질코팅을 이용한 Protective Layer를 제조하여 차단 방식에 의한 내식성 구현 연구를 수행하였다. 유럽에서는 제 7차 European Framework Program (7th FT)을 통해 2007년부터 CORRAL (Corrosion Protection with Perfect Atomic Layer) 프로젝트를 만들어 완전화 박막 연구를 진행하고 있다. 상기 프로젝트는 얇은 자연 산화막이 Bulk의 부식을 방지해주는 것에 착안하여 HIPIMS나 Filtered Arc 또는 ALD 공정을 이용하여 자연 산화막과 유사한 Defect-free 산화막을 제조하여 Barrier형 내식성 박막을 구현하는 것을 목표로 하고 있다. 본 연구에서는 완전화 박막 구현을 위한 연구동향을 파악하고 완전화 박막 제조를 위한 기술적 과제와 몇 가지의 시도에 대한 기초 연구 자료를 소개한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.217-222
• /
• 2017

Any object located in the earth's gravitational field experiences a force in the direction of the center of the earth. In order to describe the motion of objects in the field, the solutions to a system of simultaneous vector kinematic equations need to be obtained. In the analysis of freely-falling objects, the reference direction +y is usually defined to be the downward direction. In the analysis of the motion of objects thrown upward, the reference direction +y is usually defined to be the upward direction. In the analysis of the motion of objects thrown downward, the reference direction +y is usually defined to be the downward direction. In this paper, we show that the choice of reference axis in either upward or direction gives the same results by adopting a scalar product of two vectors in solving the vector kinematic equations. It is rare to find other examples of using a scalar product of two vectors in solving vector kinematic equations describing the motion of objects. An application of this study is that we can arbitrarily choose the reference direction for objects moving in a horizontal direction, including projectile motions.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.403-410
• /
• 2011

Consistent observation with high temporal and spatial resolution is required for an efficient monitoring of coastal environments. Remote monitoring system installed on the ground is capable of simultaneous observation of wide coastal area and consistent observation with high frequency, which a small number of in-situ measurements cannot manage. This paper studies two typical ground based coastal monitoring system, marine radar and camera system. Marine radar can produce time series of frequency spectrum by integrating wave number spectrum calculated from spatial and temporal variation of waves in the radar image. The time averaged radar images of waves can analyze wave breaking zone, rip currents and location of littoral bars. Camera system can observe temporal variation of foam generation originated from coastal contamination as well as shoreline changes. By extracting the part of foams from rectified images, quantitative analysis of temporal foam variation can be done. By using the two above systems of different characteristics, synergetic benefit can be achieved.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.3
• /
• pp.111-116
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition method which utilizes non-normal angles between the substrate and the vaporizing source. It has been known that tilting the substrate changes the properties of the film deposited on it, which was thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer Al films by magnetron sputtering. The magnetron sputtering source of 4 inch diameter was used to deposit the films. Al films have been deposited on Si wafers and cold-rolled steel sheets. The multilayer films were prepared by changing the tilting angle upside down at each layer interval, which means that when the first layer was deposited at an angle of $+45^{\circ}$, the second layer was deposited at an angle of $-45^{\circ}$, and vice versa. The microstructure, surface roughness and reflectance of the films were investigated using a scanning electron microscope, a surface profiler and a spectrophotometer, respectively. The corrosion resistance was measured and compared using the salt spray test. The single layer film prepared at an oblique angle of $60^{\circ}$ prepared at other angles. However, for the multilayer films, the film prepared at an oblique angle of $45^{\circ}$ showed the most compact and featureless structure. The multilayer films were found to exhibit higher corrosion resistance than the single layer films.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.3
• /
• pp.106-110
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition where incident vapor flux arrives at non-normal angles. It has been known that tilting the substrate changes the properties of the film, which is thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer TiN films by cathodic arc deposition. TiN films have been deposited on cold-rolled steel sheets and stainless steel sheet. The deposition angle as well as substrate temperature and substrate bias was changed to investigate their effects on the properties of TiN films. TiN films were analyzed by color difference meter, scanning electron microscopy, nanoindenter and x-ray diffraction. The color of TiN films was not much changed according to the deposition conditions. The slanted and zigzag structures were observed from the single and multilayer films. The relation between substrate tilting angle (${\alpha}$) and the growth column angle (${\beta}$) followed the equation of $tan{\alpha}=2tan{\beta}$. The indentation hardness of TiN films deposited by OAD was low compared with the ones prepared at normal angle. However, it has been found that $H^3/E^2$ ratio of 3-layer TiN films prepared at OAD condition was a little higher than the ones prepared at normal angle, which can confirm the robustness of prepared films.