• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.296-296
• /
• 2011

동시 증발법(co-evaporation)에 의해 성장된 $CuIn_xGa_{1-x}Se_2$ (CIGS) 박막의 광학적 특성을 photoreflectance (PR) 분광법으로 연구하였다. 조성비 x는 0~1까지 변화시켰다. 시료의 두께는 약 2.2 ${\mu}m$였다. PR 측정은 변조빔 세기, 변조빔 주파수 및 온도의 함수로 조사하였다. PR 스펙트럼으로부터 조성비 x가 증가함에따라 시료의 띠간격 에너지가 증가하는 것을 관측하였다. 상온 PR 스펙트럼으로부터 시료내에 형성된 내부 전기장을 구하였다. 그리고 변조빔 세기의 증가에 따른 PR 신호의 세기는 점차 증가하는 반면에, 변조 주파수를 증가시킴에 따라 신호의 세기가 점차 감소함을 보였다. PR 신호의 온도 의존성 실험으로부터 띠간격 에너지의 변화 및 Varshni 계수 등을 구하여 CIGS 시료의 특성을 조사하였다.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.216-222
• /
• 1989

The MC-50 cyclotron at Korea Canter Center Hospital is now operational for neutron therapy and medical radioisotope production. Design features, mechanical structures and operating characteristics of the MC-50 are described in this paper. Optimum operating condition for this cyclotron has been determined by the repetitive running, and the performances of the internal beam have been investigated through the measurements of intensity and spatial distribution of the internal beam as a function of the radius of the cyclotron. Routinely, the 40 $\mu$A of 50 MeV protons have been obtained at first Faraday cup with a extraction efficiency of 61%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.672-676
• /
• 2002

In this paper, a reliability-based design optimization method, which enables the determination of optimum design that incorporate confidence range for structures, is studied. Response surface method and Monte Carlo simulation are utilized to determine limit state function. The proposed method is applied to the I-type steel structure for reliability based optimal design.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.66-69
• /
• 2014

The spreading tube of X-ray cathode tube displayed with an electromagnetic finite element method was designed. To analyze a feature design and the concrete coordinate performance of soft X-ray tube modeling, the orbit of electron beam was simulated by OPERA-3D SW program. The fixed conditions were the applied voltage, the temperature, the work function of thermal electron between cathode and anode of tungsten. Through the analysis of distribution of electron beam and the variation of dividing region, the design of soft X-ray spreading tube equipped with two cross filaments was optimized.

• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.171-175
• /
• 2002

The change in work function was studied on Indium-Tin-Oxide(ITO) surface after O-plasma treatment using $\gamma$-Focused ion Beam($\gamma$-FIB). As the surface of ITO experienced more O-plasma treatment, both the surface resistivity and the work function got higher. Auger Electron Spectroscopy identified the increase of oxygen as well as the decrease of Sn. The rise of work function and surface resistivity is considered to be due to the change in oxygen and Sn on the surface of ITO.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.16-19
• /
• 2003

Ni thin films on the p-InP (In) substrates were grown at room temperature by using the ion beam-assisted deposition. In order to determine the work function of the Ni thin films, the $\gamma$values were measured as functions of the acceleration voltages by using Ne, Ar, $N_2$. and Xe ion sources. The dependences of the values on various gases and on the acceleration voltages of the focused ion beam were obtained to determine the work function of the Ni thin films. The value of the work function of the Ni thin films grown on the p-InP (100) substrate was 5.8 eV ~ 5.85 eV. These results provide important information on the electronic properties of Ni thin films grown on p-InP (100) substrates at room temperature.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.165-166
• /
• 2011

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.18-23
• /
• 1996

Fluctuation statistics of scattering strength are not only important because they impact the performance of active sonar systems, but also because they may provide insight into the major scattering process. In this article, analysis of the statistical characteristics of bottom backscattering, measured in shallow water, are presented. The slowly moving experimental sonar was operated at 30kHz to gather data over the bottom. Spatial and temporal correlation functions of the signal amplitudes were measured. The distribution function and probability of false alarm function of the detected envelope of widebeam and narrowbeam signals were measured. An attempt was made to compare the results with existing theoretical models. The result suggests that the statistical characteristics of bottom backscattering fluctuation of moving source is differ from that of fixed source.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.237-246
• /
• 2013

This paper proposes a hydrophone array design optimization technique for cavitation tunnel noise measurements. The optimization technique comprises of design parameters, an objective function and an optimization algorithm. The design parameters are defined for circular, spiral and multi-spiral arrays. The objective function is defined so as to consider the mainlobe beamwidth and the maximum sidelobe level simultaneously. A global optimization scheme is applied to the array design using very fast simulated reannealing (VFSR). After applying the optimization technique to arrays respectively, the peak sidelobe level and the mainlobe beamwidth of optimum arrays are analyzed. Finally the array patterns considering multiple reflections in the cavitation tunnel are evaluated to validate the proposed method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

LMTT (Linear Motor-based Transfer Technology) is a horizontal transfer system for the yard automation. which has been proposed to take the place qf AGV (Automated Guided Vehicle) in the maritime container terminal. the system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle mr. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research structural optimization for a mover of shuttle mr is performed to minimize the weight satisfying design criteria the objective function is set up as weight. On the contrary, design variable is considered as transverse, longitudinal and wheel beam's thickness and shape variable determining the dimension toward high direction and the constraints are the stresses.