• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.41-46
• /
• 2021

As data acquisition using unmanned aerial vehicles is widely used, as one of the ways to increase the accuracy of photogrammetry using unmanned aerial vehicles, a method of inputting both vertical and oblique images in bundle adjustment of aerial triangulation has been proposed. In this study, in order to find a suitable method for increasing the accuracy of photogrammetry, the accuracy of the case of adjusting the oblique images taken at different shooting angles and the case of adjusting the oblique images with different shooting angles at the same time with the vertical images were compared. As a result of the study, it was found that the error of the checkpoint decreases as the angle of the input oblique images increases. In particular, when the vertical images and oblique images are used together, the height error decreases significantly as the angle of the oblique images increases. The current 『Aerial Photogrammetry Work Regulation』 requires RMSE (Root Mean Square Error), which is the same as GSD (Ground Spatial Distance) of a vertical image. When using an oblique images with a shooting angle of 50°, a result close to this standard is obtained. If the vertical images and the 50° oblique images were adjusted at the same time, the work regulations could be satisfied. Using the results of this study, it is expected that photogrammetry using low-cost cameras mounted on unmanned aerial vehicles will become more active.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.729-742
• /
• 2016

The purpose of this study is to investigate the influence of parenting and peers on youth engagement to pornography media, the fourth year data of the fourth-grade panel (first year at middle school) and the fourth-year data of the eighth-grade panel (first year at high school) were analyzed. The number of cases investigated for this panel study were 2,378 subjects among the fourth-year panel of the fourth grade and 2,361 subjects among the fourth-year panel of middle schoolers. But this study, the total of 720 subjects that the response were made in the pornography items are analyzed. The result of this study reveals that male students were more likely to be addicted to pornography than female students. Also, inconsistency and excessive intervention among the parenting attitudes and peer attachment and numbers of delinquent friens among the peer factors were shown to have influence on youth addiction to pornography. Based on such results, a proposal that a plan to increase the parental education and strengthen peer relationships is important ahead of the Controlled intervention in the meantime was made.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.218-225
• /
• 2016

It is important to select the personnel with ideal pilot aptitude considering dramatically advancing aircraft performance and complexity of military operations as a consequence to the highly developed science and technology. The opportunity cost lost from dropouts and human error being the first cause of aviation accidents are the realistic reasons for the significance of personnel selection based on their aptitude. This study analyses the ROKAF pilot aptitude test that was improved in 2004, using various classification models. This study discusses the significance of the selected variables along with the direction of ROKAF pilot aptitude test for its development in the future. The accuracy of the classification models was improved by taking into account differing personnel characteristics of individuals on the test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.439-446
• /
• 2016

The characteristics of bearingless main rotor of helicopter are investigated through non-rotating tests and rotating tests. The stiffness and natural frequencies of rotor blades, flexbeam, and torque tube which are core components of baearingless rotor are measured to obtain input material properties for rotor analysis. The functional test on ground for assembly of one hub with damper, snubber, and no blade is carried out to check interfaces between components, kinematics of components, and pitch motion ranges under applied loads including centrifugal load. The 4-bladed bearingless rotor with 5.82m of rotor radius is tested on the whirl tower with rotation plane of 9.65m height. The thrust and power are measured to obtain hover performance and the frequencies and dampings of the rotor are obtained by excitation of cyclic pitch by hydraulic actuators.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.11-22
• /
• 2001

The interaction between forward mounted propeller and wing in ground effect, and its aerodynamic performance are analyzed by potential flow approximation. A Vortex Lattice Method(VLM) for the propeller analysis and a potential based panel method for the WIG are used together with an image method by assuming the free surface as a rigid wall. The interaction of propeller and wing in the proximity of the ground is taken into account by an iterative procedure where the boundary conditions are satisfied with the given convergence criteria. The program developed is first checked by comparing its numerical results with the experimental data and other numerical results for the propeller MP101-rudder MR21 system. Then, the propeller-WIG interaction and its performance versus ground clearance are investigated by changing parameters such as propeller position, diameter and speed of revolution. It is shown that the forward mounted propeller increases the lift forces of the wing and also enhances the height stability, depending on the design parameter. Therefore, the appropriate selection of the design parameter such as propeller diameter, revolution, the longitudinal and vertical position of propeller is necessary.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.290-293
• /
• 2017

A direct-connected, continuous type combustion test facility was developed to test a supersonic combustor model used in scramjet engines. The facility requirements were determined by assuming the flight speed of Mach 5, yielding the combustor inlet flow speed of Mach 2. Also the cross-section of the supersonic combustor under test was assumed as $32mm{\times}70mm$. As a result, the facility was designed to have the flow total pressure of 548 kPaA, total temperature of 1,320 K, and flow rate of 0.776 kg/s. The facility consists of a turbo type air compressor, electric air heater, vitiation air heater and a two dimensional facility nozzle to accelerate the flow to Mach 2. Also, an oxygen supply system was added to compensate the vitiation. The exhaust de-pressurization system is not added. Designed pressure, temperature, and flow rate were verified through the test operation of the facility.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.31-39
• /
• 2020

According to lessons learned from an accident of Fukushima Daiichi nuclear power plant, it is advisable to make a comprehensive radiation survey by the accident phase for efficient response and risk management using diverse survey platforms. This study focuses on the technical status of environmental radiation monitoring using a UAV (Unmanned aerial vehicle) and the performance test of developed aerial survey system based on two detectors with an high energy resolution through the field application to contaminated areas. Finally, the performance of aerial survey at diverse flight heights was successfully achieved by introducing the correction factor to represent the results into ambient dose rate at 1m above the ground.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.346-350
• /
• 2023

The International Civil Aviation Organization (ICAO) introduced a safety management system in the aviation sector for aviation safety and mandated the implementation of safety management systems and national safety programs. The activation of the airline's safety management system is not just a requirement for organizational members to create and comply with necessary regulations, but a safety culture to promote and improve flight safety must be established within the organization. Therefore, the safety culture of airlines acts as a major key variable in the safety management system that directly affects safety performance. This study compared the data from the European pilot safety culture awareness, which was the basic data of the survey, with statistics on the safety culture awareness of domestic flight attendants to analyze the differences in safety culture between the two groups.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.88-88
• /
• 2022

하천법 개정 및 수자원의 조사·계획 및 관리에 관한 법률 제정으로 하상변동조사를 정기적으로 실시하는 것이 의무화 되었고, 지자체가 계획적으로 수자원을 관리할 수 있도록 제도가 마련되고 있다. 하상의 지형측량은 직접 측량할 수 없기 때문에 수심 측량을 통해 간접적으로 이루어지고 있으며, 그 방법은 레벨측량이나 음향측심기를 활용한 접촉식으로 이루어지고 있다. 접촉식 수심측량법은 자료수집이 제한적이기 때문에 공간해상도가 낮고 연속적인 측량이 불가능하다는 한계가 있어 최근에는 LiDAR나 초분광영상을 이용한 원격탐사를 이용한 수심측정 기술이 개발되고있다. 개발된 초분광영상을 이용한 수심측정 기술은 접촉식 조사보다 넓은 지역을 조사할 수 있고, 잦은 빈도로 자료취득이 용이한 드론에 경량 초분광센서를 탑재하여 초분광영상을 취득하고, 최적 밴드비 탐색 알고리즘을 적용해 수심맵 산정이 가능하다. 기존의 초분광 원격탐사 기법은 드론의 경로비행으로 획득한 초분광영상을 면단위의 영상으로 정합한 후 특정 물리량에 대한 분석이 수행되었으며, 수심측정의 경우 모래하천을 대상으로 한 연구가 주를 이루었으며, 하상재료에 대한 평가는 이루어지지 않았었다. 본 연구에서는 기존의 초분광영상을 활용한 수심산정 기법을 식생이 있는 하천에 적용하고, 동일지역에서 식생을 제거한 후의 2가지 케이스에 대해서 시공간(Spatio-temporal)초분광영상과 단면초분광영상에 모두 적용해 보았다. 연구결과, 식생이 없는 경우의 수심산정이 더 높은 정확도를 보였으며, 식생이 있는 경우에는 식생의 높이를 바닥으로 인식한 수심이 산정되었다. 또한, 기존의 단면초분광영상을 이용한 수심산정뿐만 아니라 시공간 초분광영상에서도 수심산정의 높은 정확도를 보여 시공간 초분광영상을 활용한 하상변동(수심변동) 추적의 가능성을 확인하였다.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.347-354
• /
• 2018

In order to setting the control standard of Chinese cabbage pests using a drone, the downward wind speed, spraying width, and the number of falling particles and particle size were examined using a water sensitive paper with spray different heights (3, 4, 5 m) and flying speeds (3, 4 m/sec). Fore kinds of pesticides for aviation control were used to test the perfect lethal concentration and dose for major pests of Chinese cabbage such as Plutella xylostella, Spodoptera exigua and Spodoptera litura. The number of falling particles in spraying pesticides with drones was 80.5% on the upper side, 14.8% on the vertical side, and 4.7% on the back side. The number of falling particles as different spray heights were 3 m = 53, 4 m = 40 and $5m=39particles\;cm^{-2}$. The number of falling particles as different flying speeds were $3m\;sec^{-1}=62$ and $4m\;sec^{-1}=25particles\;cm^{-2}$. In the laboratory test, the perfect lethal concentration and dose of Plutella xylostella was chlorfenapyr SC (20 times, $0.5{\mu}l$) and bistrifluron chlorfenapyr SC (25 times, $0.5{\mu}l$). The perfect lethal concentration and dose of Spodoptera exigua was chlorfenapyr SC (20 times, $1{\mu}l$), bistrifluron chlorfenapyr SC (20 times, $1{\mu}l$), and chlorfenapyr SC (20 times, $1{\mu}l$) and bistrifluron chlorfenapyr SC (20 times, $0.5{\mu}l$) for Spodoptera litura. Therefore, the main pest control method of Chinese cabbage using drones is 20 times diluted chlorphenapyr SC or bistrifluoruron-chlorphenapyr SC, sprayed at 3 m height by $3msec^{-1}$ of going speed. This spraying method will be effective for control of Chinese cabbage pest.