• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.422-426
• /
• 1991

In order to synthesize high-purity alpha alumina fine powder, the aluminum hydroxide and ammonium aluminum sulfate(alum) precursor were prepared from natural alumino-silicate(halloysite). The thermal decomposition mechenism for both precursors was elucidated by DTA/TG, XRD and IR analysis. The microstructure, specific surface area and purity of ${\alpha}-Al_2O_3$ were characterized by SEM, and BET analysis. The particle size of ${\alpha}-Al_2O_3$ was determined to be ${\phi}$ = 0.1∼0.5 ${\mu}$m. However, the specific surface area for the alum derived ${\alpha}-Al_2O_3$(89.0 m$^2$/g) was extremely higher than that for the aluminum hydroxide derived one(7.3 m$^2$/g).

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.461-465
• /
• 2001

La$_{0.7}$Ca$_{0.3}$MnO$_3$분말은 공기중에서 하소온도와 시간의 변화에 따라 각각 용액연소법과 고상반응법을 이용하여 제조되었다. 조성 및 구조 특성을 XRD와 SEM으로부터 조사하였으며 소결성은 dilatometer에 의해 조사되었다. 또한 분말 특성은 BET에 의해 조사되었고 분말의 하소온도는 TG 분석으로부터 결정되었다. 하소온도 및 시간이 증가함에 따라 La$_{0.7}$Ca$_{0.3}$MnO$_3$상의 XRD peak가 증가하였는데, 고상반응법을 이용한 경우 100$0^{\circ}C$에서 24시간 동안 하소해서야 겨우 La$_{0.7}$Ca$_{0.3}$MnO$_3$의 단상을 얻을 수 있었으나 용액연소법을 이용한 경우, $650^{\circ}C$에서 30분 동안 하소함으로써 submicron 입자크기를 갖는 단상이면서 초미세한 La$_{0.7}$Ca$_{0.3}$MnO$_3$분말을 쉽게 얻을 수 있었다. 또한 용액연소법에 의해 제조된 다결정인 La$_{0.7}$Ca$_{0.3}$MnO$_3$분말은 49.44$m^2$/g 정도의 매우 큰 비표면적을 얻을 수 있었다. 이 값은 고상반응법에 의해 제조된 분말의 비표면적 보다 매우 컸으며 이와 같으 사실로 인해 용액연소법에 의해 제조된 분말의 소결온도를 낮출 수 있었다. 분말의 소결온도를 낮출 수 있었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.677-680
• /
• 2008

The surface of particles was energetically modified by inter-grinding OPC and BFS in vibration mill for improvement of the early strength and low-heat evolution of concretes. BFS was pre-grinding in ball-mill to 2535(BS2) and 3245 $cm^2/g$(BS3), in blaine surface area. The inter-grinding time in vibration mill was changed from 10 minutes to 30 minutes. And Mixing ration of BFS to OPC was changed in 60, 70, 80%. After inter-grinding, the change of specific surface area, particle size distribution, hydration heat of cement and compressive strength of mortar were measured. As the result of comparison test with LHC, it was found that the mixture and inter-grinding time satisfying the value of over 100% of compressive strength for 7 days and under 170J/g of heat of hydration for 72 hours. and it was confirmed that the possibility of low heat slag cement utilizing blast furnace slag(BS2, BS3) with the low fineness in high volumes.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.339-345
• /
• 2017

Carbonaceous adsorbent (CA-WTP) was prepared by heat treatment at $400^{\circ}C$ for 2 h in N2 atmosphere using waste tire powder (WTP). WTP and CA-WTP were first characterized by thermo-gravimetric analysis (TGA), energy dispersive X-ray spectrometer (EDS), scanning electron microscopy (SEM), specific surface area analysis (BET) and FT-IR spectroscopy. Then, they were tested as adsorbents for removal of Cd in water. CA-WTP exhibited much higher specific surface area and total pore volume than WTP itself and showed higher adsorption capacity for Cd. Equilibrium data of adsorption were analyzed using Freundlich and Langmuir isotherm models. It was seen that both Freundlich and Langmuir isotherms have correlation coefficient $R^2$ value larger than 0.95. The results of studies indicate that CA-WTP developed from WTP by heat treatment could be used as efficient adsorbent for the removal Cd from water.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.644-649
• /
• 2006

In this paper, the Cr(VI) adsorption behaviors of activated carbons (ACs) treated by various ozone treatment conditions were studied. The surface properties of the ACs studied were determined by pH, acid-base, and FT-IR measurements. $N_2$ adsorption isotherm characteristics at 77K were confirmed by BET equation, Boer's t-plot method, and Horvath-Kawazoe's slit pore model. Also, the total Cr adsorption amount onto the ACs was measured by ICP-AES. As a result, the ozone treatment led to an increase of oxygen-containing polar functional groups and total acidity as well. Meanwhile, the specific surface areas or micropore volumes were slightly decreased after the ozone treatment due to the micropore filling or blocking. Nevertheless, the total Cr adsorption of ACs was increased with increasing of the ozone treatment time, attributed to the good interaction between Cr ions and polar functional groups on the ACs.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.59-64
• /
• 2013

Effects of weathering intensity on the adsorption of heavy metals such as lead(Pb) and copper(Cu) onto decomposed granite soils were investigated by a series of batch tests. The chemical components such as $SiO_2$, $K_2O$ and $Na_2O$ having relatively high solubility were reduced and the oxidized $Fe_2O_3$ content was increased with the increase of weathering intensity. Weathering of granite soils increased the ignition loss and specific surface area, while it decreased the permeability. The lead and copper adsorptions onto the decomposed granites were enhanced with the increase of weathering intensity, mainly due to the increase of specific surface area and clayed contents. Adsorption of lead and copper onto the weathered granites could be more adequately described by the pseudo-second-order kinetic model than the pseudo-first-order model.

• Resources Recycling
• /
• v.14 no.1
• /
• pp.47-54
• /
• 2005

Korean grape-seed that is one of the agricultural waste was used as a raw material to prepare activated carbon through roasting, carbonization and chemical activation processes. NaOH, KOH, ZnCl$^2$ were also used as activation reagents. The mixing of the ratios of the grape-seed and each activation reagent were varied to 100-300 weight percent. The surface areas of the activated carbon manufacture from the grape-seed were 44.09~121.33 m$^2$/g. The adsorbate transmittance of methylene blue was determined UV absorption at 660 nm as maximum adsorption wavelength using by UV spectrophotometer. As a result, adsorption of methylene blue on the activated carbon prepared with NaOH activation was more successful than others. Equilibrium absorption time was approximately 60 min.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.93-107
• /
• 2002

The active carbon waste which was used in water purification plant was investigated for the improvement of capillary after microwave treatment. The variation of surface area was measured with the various kinds and amounts of active carbon. The water vapor as the activator was verified to improve the capillary but it reacted with the water contained in waste active carbon. In contrast to the water vapor, the $CO_2$ gas improved the surface area about 10-20 % compared to as received one. The best results was observed at the intensity of 2.75 kw microwave. The more effective recovery of active carbon waste was observed at the microwave treatment compared to the rotary kiln treatment. However, the mass production is so difficult in the microwave process.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.190-194
• /
• 2012

10 wt% Mn supported on various commercial $TiO_2$ catalysts were prepared by wet-impregnation method for the low temperature selective catalytic reduction (SCR) of NO with $NH_3$. A combination of various physico-chemical techniques such as BET, XRD, XPS and TPR were used to characterize these catalysts. MnOx surface densities on MnOx/$TiO_2$ catalyst were related to surface area. As MnOx surface density lowered with high dispersion, the SCR activity for low temperature was increased and the reduction temperature ($MnO_2$ ${\rightarrow}$ $Mn_2O_3$) of surface MnOx was lower. For a high SCR, MnOx could be supported on a high surface area of $TiO_2$ and should be existed a high dispersion of non-crystalline species.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.61-66
• /
• 2011

In this study, we prepared $TiO_2$ with the sol-gel method and controlled physico-chemical properties by a simple heat treatment. All materials were applied to photocatalytic decomposition of methylene blue and the material treated at 473 K showed the highest photocatalytic efficiency. The high performance resulted from a high adsorption amount of methylene blue due to a high surface area of $229.8m^2/g$. However, the material treated at 873 K, despite of a low surface area of $23.8m^2/g$ and a large particle size of 28.38 nm, exhibits a good photocatalytic performance due to the effect of mixed cyrstalline rutile and anatase phases formed by the high heat treatment temperature.