• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.156-164
• /
• 2003

STS316L had been used as the structural material for energy environmental facilities, because austenite stainless steels like 316L have superior mechanical properties of which toughness, ductility, corrosion resistant and etc. However, those welded structures are receiving severe damage due to increasing of the aged degradation. Most studies until now have been carried out against fatigue behaviors of weldments, and were not well studied on nondestructive evaluation methods. In this study, the fatigue crack propagation behavior of STS316L weldment usually used for vessels of the nuclear power plant was investigated. Also, the degradation characteristics of 316L stainless steel weldments were evaluated by the ultrasonic parameter such as ultrasonic velocity, attenuation factor and time-frequency analysis. The results of this study can be used as a basic data for the prediction of the fatigue crack life of weldments structures without disjointing or stopping service of structures in service.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.486-493
• /
• 2015

The ultrasonic nondestructive test (NDT) was applied to deck in-service to inspect and evaluate the performance of decking materials using ultrasonic pulse velocity. First, the measuring method between direct and indirect method according to transducer arrangement was studied. Second, the ultrasonic pulse velocity of decks in-service was compared with the passage of time. Finally, the change of ultrasonic pulse velocity was evaluated to expect service life of decking materials. The results of comparison between direct and indirect method was statistically insignificant and the ratio of direct to indirect method was 1.02. 1.05 respectively. The ultrasonic pulse velocity of decks in-service was decreased as the passage of time and the linear relationship in the ultrasonic pulse velocity to passage of time was found. From the results, The ultrasonic NDT will be helpful as an efficient method of on-site management of decks in-service.

• Conservation Science in Museum
• /
• v.23
• /
• pp.91-108
• /
• 2020

This study conducted non-destructive analyses of the material features of seven gilt-bronze crowns of Baekje Kingdom that were excavated in the Cheonan, Gongju, Seosan, Iksan, Naju, and Hapcheon areas. A typical Baekje gilt-bronze crown has a conical inner crown and an outer crown embellished with vertical ornaments on the front and the back, a tube topped with a hemispherical ornament, and other ornamentation. Diverse designs (e.g., dragon, bonghwang, flowers, and plants) were applied using a range of techniques, including repoussé, chasing, openwork, and engraving. Formal features differ among the crowns according to their period of production and site of excavation. The substrate metal of the crowns is either pure copper or mixed copper with a small amount of lead. The crowns were amalgam-plated on the surface with pure gold or gold with a small amount of silver. The crown from Okjeon Tomb No. 23 in Hapcheon in the ancient Gaya region has a high silver content, which appears to be a regional feature. In addition, this crown from Okjeon Tomb No. 23, which can be categorized as Baekje-style gilt-bronze crown, seems to be plated at most three times, while the gilt-bronze crowns found within Baekje Kingdom territory were plated once or twice.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.410-414
• /
• 2000

The feasibility of near infrared spectroscopy (NIRS) for the evaluation of the compost pro-duced by composting swine excreta has been investigated. The analytes determined were total nitrogen, total phosphorus, organic matter,total carbon,moisture, Cu, $K_2O$ and $Na_2O$. The ranges of concentration of the cal-ibration samples obtained by the conventional chemical method for each component were 1.30-2.75%, 1.45-4.86%, 7.36-81.5%, 23.0-41.1%, 4.2 the coefficient of variation was 4.38, 5.5, 3.2, 1.5, 10.9, 10.6 and 11.9% for total nitrogen, total phosphorus, organic matter, total carbon, moisture, Cu, $K_2O$ and $Na_2O$,respectively. The overall results showed that NlRS can be used for a non-destructive and rapid determination of the analytes to evaluate the quality of compost samples.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.521-537
• /
• 2000

Ultrasonic imaging is the most widely used modality among modern imaging device for medical diagnosis and the system performance has been improved dramatically since early 90's due to the rapid advances in DSP performance and VLSI technology that made it possible to employ more sophisticated algorithms. This paper describes "main stream" digital signal processing functions along with the associated implementation considerations in modern medical ultrasound imaging systems. Topics covered include signal processing methods for resolution improvement, ultrasound imaging system architectures, roles and necessity of the applications of DSP and VLSI technology in the development of the medical ultrasound imaging systems, and array signal processing techniques for ultrasound focusing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2004

The effect of the substitution of Tungsten(W) for Molybdenum(Mo) on the creep behaviour of 22Cr-5Ni duplex stainless steel(DSS) has been investigated. Creep tests were carried out at $600^{\circ}C\;and\;650^{\circ}C$. Intermetallic ${\sigma}$ phase is precipitated during creep at $650^{\circ}C$, at which creep rupture time was much lower compared with at $600^{\circ}C$. The substitution of W for Mo in the duplex stainless steel was known to retard the formation of ${\sigma}$ phase. Minimum creep rate and creep rupture time, however, were hardly influenced by the substitution of 2wt.% W. An ultrasonic measurement for the creep specimens has been carried out for the evaluation of creep damage. The sound velocity increases propotionally with the increase of creep rupture time at $600^{\circ}C$ of creep temperature. On the contrary, the sound velocity decreases with the increase of rupture time at $650^{\circ}C$, which can be correlated with the microstructural evolution during creep.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.564-567
• /
• 2010

본 논문에서는 감귤의 소비자 선호도 조사를 통하여 객관적인 품질기준을 제시하였다. 지금까지 제주감귤의 품질 등급은 선과기를 이용한 크기에 따른 상품 구별과, 농 감협과 일부 영농 법인에서 비파괴 선과기를 이용하여 선별되어진 감귤을 자체적인 브랜드에 준하여 등급을 제시하여 왔다. 그 등급설정은 과학적 객관적이거나, 소비자의 니즈에 의한 것이 아니라 편의에 위한 관행적 등급으로 판단된다. 그 등급 내용을 보면 최고등급 브랜드인 경우 당도 $12^{\circ}Bx$ 이상, 산도 1% 미만을 요구하고, 다음 등급 브랜드인 경우는 당도 $11^{\circ}Bx$, 산도 1% 미만을 요구하는 등 높은 당도와 낮은 산도를 천편일률적으로 적용하여 사용되어지고 있다. 따라서 감귤의 소비자 선호도 조사를 통한 소비자 만족도에 근거하여 당도 4등급, 산도 4등급으로 총 16개로 구분하였고, 이를 바탕으로 1등급에서 5등급까지의 5개의 등급으로 설정하였다.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.295-301
• /
• 2000

Various nondestructive prospecting method were applied to detect the flaws of concrete structure, but the satisfactory result could not be obtained, yet. Fracture and cavities existing concrete structure will have a bad effect on physical and mechanical characteristic of concrete. This study deal with detection of flaws using seismic first arrival and various inversion method in theoretical model. And ultrasonic seismic method is tried to experimental model to detect fracture and cavity.

• 전기의세계
• /
• v.45 no.3
• /
• pp.3-15
• /
• 1996

본 고에서는 케이블 시스템 진단을 위하여, 열화 현상의 확인, 관련된 성질 변화의 측정과 검출방법의 개발 및 운전 지침등에 대해, 관련 문헌에 대한 조사를 토대로 정리하였으며, 이론적인 접근보다는 실제적인 것을 채택하고 케이블 사용자에 적용될 수 있는 방법을 제시하고자 하였다. 진단 시험에 대해서는, 진단법을 다루었거나, 현장이건 아니건 다양한 시험을 고려할 때 진단 시험으로서 정의 -"운전조건에서 케이블이나 액세서리의 사고에 원인이 될 수 있는 열화 현상을 평가하고 찾아내는 것"- 할 수 있다면 본 고에 포함시켰다. 따라서, 사고가 발생되어 교체된 케이블 샘플에 대한 실험실 시험과 현장에서의 비파괴 시험은 모두 진단시험으로 간주하여 정리하였다. 본 고에서는 고전압 OF 케이블과 사출케이블 및 액세서리에 대해 다루었으며, 열화 현상보다는 진단법에 주력하였고 DC 케이블은 제외하였다.이블은 제외하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.781-786
• /
• 1999

One of the major causes of concrete pavement deterioration is the loss of support due to erosion and pumping of subbase and subgrade. In this study, procedures for the detection of voids under concrete pavement slab are presented using nondestructive test method such as FWD(Falling Weight Deflectometer) and GPR(Ground Penetration Radar). The deflection responses of concrete slab obtained in FWD field test are analysed for determining the presence of void. Also, reflection responses in GPR test are interpreted. It was concluded that these procedures are available for detecting the viods under concrete pavement slab.