• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.68-76
• /
• 1998

A CCD camera with a laser stripe was applied to realized the automatic weld seam tracking. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path. The adaptive Hough transformation was used to extract laser stripes an to obtain specific weld points. It takes relatively long time to process image on-line control using the basic control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The dead zone, where the sensing of weld line is impossible, was eliminated by rotating the camera with its rotating axis centered at the weld torch. When weld lines were detected, the camera angle was controlled in order to get the minimum image data for sensing of weld lines. Consequently, the image processing time was reduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1880-1881
• /
• 2011

본 논문에서는 2차원 평면상을 주행하는 이동 로봇의 목표물에 대한 상대 위치 및 방향각을 측정하는 방법에 대하여 제안한다. 측정을 위해 사용되는 센서는 스테레오 카메라로, 이동 로봇은 3DOF의 특징을 갖고 있으므로 두 개의 점을 이용하여 상대 위치 및 방향각을 측정하는 방법을 제안한다. 상대 위치를 측정하는 과정에서 외란에 의한 위치 오차가 발생하게 되며, 이에 대한 대책으로 칼만 필터를 적용하여 더욱 강건한 상대 위치 추정을 한다. 마지막으로 MATLAB을 이용한 시뮬레이션을 통하여 외란이 존재하는 환경 하에서 제안된 시스템의 성능을 확인한다.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.92-99
• /
• 2007

Welding fabrication invariantly involves three district sequential steps: preparation, actual process execution and post-weld inspection. One of the major problems in automating these steps and developing autonomous welding systems, is the lack of proper sensing strategies. Conventionally, machine vision is used in robotic arc welding only for the correction of pre-taught welding paths in single pass. In this paper, novel presented, developed vision processing techniques are detailed, and their application in welding fabrication is covered. The software for joint tracking system is finally proposed.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.81-87
• /
• 2007

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. However, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis and artificial neural network were used as the research methods. And, the results of two prediction methods were compared and analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.454-457
• /
• 2004

AGV for FMS must be detected an obstacle. Therefore, many studies have been advanced, and recently, the ultra sonic sensor is used for this. However, the new method has to be developed because the ultra-sonic-sensor has many problems as a noise in factory, an directional error and detection of the obstacle size. So, we study the fast stereo vision system that can give more information to obstacles for intelligent AGV system. For this, the simulated AGV system was made with two CCD cameras in front to get the stereo images, and the threshold process by color information (intensity and chromaticity) and structure stereo matching method were constructed.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.350-354
• /
• 2020

In this study, a pressure sensor for each displacement was fabricated based on the silicon-based pressure sensor obtained through simulation results. Wires were bonded to the pressure sensor, and a piezoresistive pressure sensor was inserted into the printed circuit board (PCB) base by directly connecting a micro-electro-mechanical system (MEMS) sensor and a readout integrated circuit (ROIC) for signal processing. In addition, to prevent exposure, a non-conductive liquid silicone was injected into the sensor and the entire ROIC using a pipette. The packaging proceeded to block from the outside. Performing such packaging, comparing simple contact with strong contact, and confirming that the measured pulse wavelength appears accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.89-90
• /
• 2008

본 논문은 네트워크를 통해서 이동로봇을 원격제어하기 위해 필요한 비전 시스템에서 HMD(Head Mounted Display)의 방향각 측정 알고리즘에 관한 연구이다. 우선 이 이동로봇 원격제어 시스템은 AP와 무선랜을 이용하여 독립 무선 네트워크를 구축하였고 이동로봇의 주변 환경을 레이저 센서와 스테레오 카메라를 이용하여 사용자에게 정보를 전송한다. 스테레오 카메라를 통해 전송된 영상 정보는 HMD를 통하여 볼 수 있다. 실시간으로 영상 카메라에 의해 측정 된 HMD의 회전 각도는 pen-tilt에 전송되어 HMD가 회전한 만큼 pen-tilt도 회전하여 이동로봇의 주변 환경 영상정보를 얻을 수 있는 알고리즘을 제안하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 하계학술대회
• /
• pp.61-64
• /
• 2011

본 논문은 휴대폰 상에서 손(손가락) 동작을 이용한 가상 정보(객체)와의 자연스러운 상호작용을 제공하는 비전 기반 인터페이스를 제안한다. 이 인터페이스는 사용자가 한 손에 휴대폰을 들고 휴대폰의 카메라를 통해서 다른 손의 손바닥을 바라보는 상황을 가정한다. 사용자의 손바닥 위에 가상 객체가 증강되고, 사용자는 자신의 손과 손가락의 움직임을 통해서 가상 객체와 상호작용 할 수 있다. 제안하는 인터페이스는 사용자에게 친숙한 손동작 기반으로 동작하며 추가적인 센서나 마커를 요구하지 않기 때문에, 사용자는 별도의 훈련 과정 없이 원하는 시간과 장소에서 자유롭게 가상 객체와 상호작용 할 수 있다. 일부 시간이 많이 걸리는 처리 과정을 모바일 환경에 맞도록 최적화, 고속화함으로써, 제안하는 인터페이스는 상용화된 휴대폰(Galaxy S2)에서 5fps 로 동작한다.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.18-26
• /
• 2011

This paper presents a method, Exposure Controlled Temporal Filtering (ECF), applied to visual motion tracking, that can cancel the temporal aliasing of periodic vibrations of cameras and fluctuations in illumination through the control of exposure time. We first present a theoretical analysis of the exposure induced image time integration process and how it samples sensor impingent light that is periodically fluctuating. Based on this analysis we develop a simple method to cancel high frequency vibrations that are temporally aliased onto sampled image sequences and thus to subsequent motion tracking measurements. Simulations and experiments using the 'Center of Gravity' and Normalized Cross-Correlation motion tracking methods were performed on a microscopic motion tracking system to validate the analytical predictions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1958-1959
• /
• 2006

This paper proposes a local path-planning algorithm that enables a mobile robot with vision sensor in a local area.The proposed method based on projective geometry and a wavefront method finds local-paths to avoid collisions using 3-D walls or obstacles map generated using projective geometry. Simulation results show the feasibility of the proposed method