• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.8-15
• /
• 2011

LTE-Advanced aims at peak data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished only by using wide spectrum allocation of 100MHz as well as advanced multiple input multiple output antenna techniques to the uplink. This paper analyzes the uplink precoding techniques which include LTE codebook of downlink, singular value decomposition codebook, and equal gain transmission codebook over LTE defined single carrier frequency division multiplexing systems. Finally considering nonlinear transmit power amplifier model, it is shown that link-level performance of EGT is superior to those of any other precoding schemes.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.145-146
• /
• 2017

최근 세계적으로 많은 지진이 발생하고 있으며 기상이변으로 인한 자연재해로 인해 주요 시설물들의 안전성에 관한 관심이 증가하고 있는 추세이다. 특히 비구조 요소의 경우 구조 요소보다 건설 초기 투자비용이 높아 지진이 발생하였을 때 많은 피해가 발생할 가능성이 있으며 비구조 요소의 파괴는 심각한 2차피해로 발전 될 수 있으므로 내진안전성 평가는 반드시 이루어져야 한다고 볼 수 있다. 따라서 본 연구에서는 압착식 조인트의 접촉을 고려한 수계소화설비 파이프라인의 내진성능 평가를 위한 비선형 유한요소 모델을 구축하였다.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.423-433
• /
• 2012

The axial load on the concrete-filled steel tube (CFT) column produces confinement stress, which enhances strength of the core concrete. The amount of strength increase in concrete depends on the magnitude of produced confinement stress. From nonlinear analyses, the ultimate resisting capacity of the CFT columns subjected to axial loads was calculated. Nonlinear material properties such as Poisson's ratio and stress-strain relation were considered in the suggested model, and the maximum confining stress was obtained by multi axial yield criteria of the steel tube. This proposed model was verified by comparing the analytical results with experimental results. Then, regression analyses were conducted to predict the maximum confining stress according to D/t ratio and material properties without rigorous structural analysis. To ensure the validity of the suggested regression formula, various empirical formulas and Eurocode4 design code were compared.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.50-53
• /
• 2002

이 논문에서는 CNC 머시닝 센터의 두 서보축을 대상으로 가공정밀도를 유지하면서 최고의 이송속도로 가공 속도를 증가시키는 퍼지 제어 기법을 제안한다. 또한 기존의 오차 모델링 방식이 아닌 비선형 궤적에서도 적용이 가능한 최근의 윤곽오차 모델을 사용한다. 퍼지 소속함수의 입력 변수가 허용 오차에 따라 스케링되고 이송속도와 윤곽오차와의 관계를 퍼지제어룰에 기초하여 허용 오차안에서 매 시간마다 보다 빠른 이송속도를 찾는다. 모의 실험 결과들이 제안한 방법이 기존의 고정된 이송속도를 사용하는 방법과 유사한 윤곽오차를 보이면서도 빠른 가공을 할 수 있음을 보여준다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.826-832
• /
• 2016

A two-wheeled balancing mobile robot (TWBMR) has the characteristics of both nonlinear and underactuated system. In this paper, the disturbances acting on a TWBMR are classified into body disturbance and wheel disturbance. Additionally, we describe a nonlinear disturbance observer, which is suitable as a single input multi-output (SIMO) system for the longitudinal motion of TWBMR. Finally, we propose a reasonable disturbance compensation technique that combines the indirect reference input of equilibrium point and the direct torque compensation input. Simulations and experimental results show that the proposed disturbance compensation method is an effective way to achieve robust postural stability, specifically on inclined terrains.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.219-220
• /
• 2007

Image plane상에서의 목표의 크기, 시선각 (Line-of-Sight angle) 및 관측자의 상태 정보 등을 이용하여 목표의 상태를 추정한다. 표적 모델을 Linear Time Varying(LTV) system처럼 다룰 수 있음을 밝히고, 이를 이용하여 가관측성(observability)이 성립하는 조건을 구하고 Kalman filter를 이용하여 비선형 추정기를 설계한다. 그리고 등가속도 표적 추정, 미사일의 정지 표적 공격 등의 모의실험에 적용해 본다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.915-917
• /
• 2003

In this paper, a 3D shape optimization algorithm which guarantees a smooth optimal shape is presented using parameterized sensitivity analysis. The design surface is parameterized using Bezier spline and the control points of the spline are taken as the design variables. The parameterized sensitivity for the control points are found from that for nodal Points. The design sensitivity and adjoint variable formulae are also derived for the 3D non-linear problems. Through an application to the shape optimization of 3D electromagnet to get a uniform magnetic field, the effectiveness of the proposed algorithm is shown.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.324-326
• /
• 2000

A 3D magnetostatic field is analyzed considering the non-linear characteristics of the material using finite element method. In the finite element formulation, the edge element is adopted since it reduces the required computer memory and the computing time. The modified Newton-Raphson method is also used for non-linear analysis. A numerical example with the TEAM workshop problem 13 is analyzed, and the results are proved to concide well with measured ones.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.148-149
• /
• 2012

본 논문은 HEV용 고출력 리튬 폴리머 배터리(LI-PB)의 수학적 모델링 기법을 제안한다. 비선형 시스템인 리튬 폴리머 배터리의 전기화학적 특성을 수학적인 상태 방정식으로 표현하고, 배터리 셀의 직접적인 충/방전, 온도 실험을 통하여 셀 모델의 파라미터를 추출하고 표현된 상태 방정식으로 최소의 오차를 가지는 파라미터를 구한다. 대용량 충방전기를 사용한 실험으로 본 연구의 적합성을 입증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1132-1133
• /
• 2007

A circuit-domain model of PWM inverter provides accurate simulation results in consideration of detail switching characteristics. Although, a huge amount of computation time is demanded for the simulation results of several ten seconds, which is the required time to analyze system behaviors or control performances of Electric Power Steering(EPS) on real drive condition. This paper describes the nonlinear inverter model for fast dynamic simulation of EPS without the PWM concept through analyzing the effect of nonlinear switching characteristics like dead time, forward voltage drop and conduction resistance. Some inverter models including proposed model are compared from two standpoints which are computation time and accuracy. The comparison results show the usefulness of the developed model in order to develop the control algorithm through the fast prediction of system behaviors.