• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1787-1793
• /
• 2018

Shadow is a common phenomenon observed in natural scenes, but it has a negative influence on image analysis such as object recognition, feature detection and scene analysis. Therefore, the process of detecting and removing shadows included in digital images must be considered as a pre-processing process of image analysis. In this paper, the existing methods for acquiring 1D invariant images, one of the feature elements for detecting and removing shadows contained in a single natural image, are described, and a method for obtaining 1D invariant images based on linear regression has been proposed. The proposed method calculates the log of the band-ratio between each channel of the RGB color image, and obtains the grayscale image line by linear regression. The final 1D invariant images were obtained by projecting the log image of the band-ratio onto the estimated grayscale image line. Experimental results show that the proposed method has lower computational complexity than the existing projection method using entropy minimization, and shadow detection and removal based on 1D invariant images are performed effectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.158-164
• /
• 2002

This paper presents a proper parallel control method using a conventional control and a repetitive control for improving the output voltage waveform of uninterruptable power supply. Although first-order prediction control method shows a good characteristics to rectifier load, it is not sufficient to reduce steady state errors generated in nonlinear loads such as rectifier loads and phase controled loads. So we also employed a repetitive control method. A repetitive control method can eliminate steady state errors in the distorted output voltage caused by cyclic loads. The presented control scheme is verified through simulation and experiment. Experimental results Implemented on a single phase PWM inverter equipped with a LC output filter with 3 kVA, 60 Hz are shown.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.87-95
• /
• 2011

A rational method for determination of initial cable forces in cable-stayed bridges without complicated nonlinear analysis is presented. Initial shape analysis for cable-stayed bridges should be able to find optimizated initial cable forces and unstrained length that minimize deflection and vending moments of the deck and pylon. A presented method utilizing the idea of force equilibrium organizes initial shape analysis for each types of cable-stayed bridges. The results of that analysis were compared to several existing methods for 2D numerical examples. And for 3D actual bridges, the improved TCUD method was performed to demonstrate the accuracy of this study.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.143-152
• /
• 2005

Optimal methods for designing multiplierless IIR filters with cascaded prefilter-equalizer structures are proposed for narrowband applications. Assuming that an U filter consists of a cyclotomic Polynomial (CP) prefilter and an all-Pole equalizer based on interpolated first order polynomial (IFOP), in the proposed method the prefilter and equalizer are simultaneously designed using mixed integer linear programming (MILP). The resulting filter is a cascaded filter with minimal complexity. In addition, MtP tries to minimize both computational complexity and phase response non-linearity. Design examples demonstrate that the proposed methods produce a more efficient cascaded prefilter-equalizer than existing methods.

• Computational Structural Engineering
• /
• v.3 no.1
• /
• pp.83-95
• /
• 1990

Many structural optimization problems are solved by numerical algorithms since these are complicated and nonlinear. To provide a wider base and popular it to structual design optimization, reliable, accurate and superlinearly convergent nonlinear programming algorithm with active-set strategy have been developed. One of these is RQP(recursive quadratic programming method). This algorithm has several parameters and its performance is influenced by variations of these key parameters. Therefore, an RQP algorithm is selected to enhance its numerical performances by choosing proper parameters. The paper persents these influences on its numerical performance. For comparison of performances, a structural design software for minimum weight of truss subjected to displacement, stress, and lower and upper bounds on design variables is also implemented.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.2
• /
• pp.92-96
• /
• 2006

NLPCA(Nonlinear Principal Component Analysis) is a novel technique for multivariate data analysis, similar to the well-known method of principal component analysis. NLPCA operates by a feedforward neural network called AANN(Auto Associative Neural Network) which performs the identity mapping. In this work, a sensor fault detection system based on NLPCA is presented. To verify its applicability, simulation study on the data supplied from risk management system is executed.

• Journal of Broadcast Engineering
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2020

In this paper. we propose an effective compensation scheme to the quantization error arisen from quantized learning in a machine learning on an embedded system. In the machine learning based on a gradient descent or nonlinear signal processing, the quantization error generates early vanishing of a gradient and occurs the degradation of learning performance. To compensate such quantization error, we derive an orthogonal compensation vector with respect to a maximum component of the gradient vector. Moreover, instead of the conventional constant learning rate, we propose the adaptive learning rate algorithm without any inner loop to select the step size, based on a nonlinear optimization technique. The simulation results show that the optimization solver based on the proposed quantized method represents sufficient learning performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.362-369
• /
• 2007

APSK (Amplitude Phase Shift Keying) digital modulation is characterized by the circular positioning of the transmission symbols in the constellation diagram. Due to such structural characteristics, the peak-to-average power ratio of the APSK modulation is lower than that of the QAM (Quadrature Amplitude Modulation), and the amount of performance degradation over nonlinear channels can be mitigated. The APSK modulation scheme has recently been adopted as satellite communication system standards including the DVB-S2 (Digital Video Broadcasting - Satellite, Version 2). In this paper, a BER (Bit Error Rate) upper bound approximation formula is derived using the channel model with the output power saturation characteristics, and its accuracy is demonstrated. Using the derived formula, the input power level that minimizes the BER is determined. The optimized performance based on the radii ratio of the 16APSK constellation and the channel saturation level is also presented.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1986

In this paper, the frontal method based elastic-plastic F.E.M. program for mini-computer was developed. Since, the executable source program size was restricted by the system core memory size on the mini-computer, the active variables were memorized by the element base and the nonactive varables were memorized to the external disc file. The active variables of the finally developed program were reduced enough to execute about 1,000 freedom finite element on the mini-computer on which available variables were restricted as 32,767 integers. A modified CT fracture test specimen was examined to test the developed program. The calculated results were compared with experimental results concerning on the crack tip plastic deformation zone. Recrystallization technique was adopted to visualize the intensive plastic deformation regions. The Von-Mises criterion based calculation results were well agreed with the experimental results in the intensive plastic region which was over than 2% offset strain. The F.E.M. results using the developed program were well agreed with the theoritical plastic boundary which was calculated by the stress intensity factor as r$_{p}$=(K$_{1}$$^{2}$/2.pi..sigma.$_{y}$$^{2}$).f(.theta.).).).